Heinner HWM-VT2104IVKA+++ Manual page 25

www.heinner.com
•
To open the pump cover, you can use the powder detergent spade or liquid detergent level plate
coming out of your machine.
•
Fit the end point of the plastic part to the gap of the pump cover and push it back. This will open
the cover.
•
Before opening the filter cover, settle a vessel in front of the filter cover to prevent the water
remained in the machine from flowing on the ground.
•
Loosen the filter cover in counterclockwise and then empty water.
Note: You may have to empty the water collection vessel several times according to the amount of
water in the machine.
•
Clean the foreign materials in the filter with a brush.
•
After cleaning the filter, fit the cover and tighten it by rotating it in clockwise direction.
•
While closing the pump cover, ensure that the parts on the inner side of the cover to match the
holes on the front panel side.
You can reattach the pump cover in the reverse order that you removed it.
As water in the pump may be hot, wait until it cools down.
DETERGENT DRAWER
Your detergents may deposit residue in detergent drawer and housing of detergent drawer over time.
To clean the residue formed, disassemble the detergent drawer in particular periods. It is
recommended that you clean your pump filter every 2 months.
25