Fitting The Stroller Seat To The Frame - Britax STRIDER PLUS - ANNEXE 534 Manual

strOLLEr assEMbLY & OpEratiON

11. fittiNg thE strOLLEr sEat tO thE fraME

warNiNg - always remove your child from the stroller seat before installing, removing or
changing seat direction.
NOtE: the seat is reversible so it can face in either forward or rearward position.
a
hold the stroller seat over the frame.
c
push the stroller seat down until both
seat mouldings are locked into the frame
sockets.
b
align the stroller seat mouldings on
both sides, over the frame connection
sockets located in the middle of the stroller.
D
pull up on both sides of the stroller
seat to make sure it is securely locked into
the stroller frame.
15