Related Manuals for U.S. Solid USS-DBS72-1.2
Summary of Contents for U.S. Solid USS-DBS72-1.2
- Page 1 Analytical Balance INSTRUCTION MANUAL This manual should be made available to all users of this equipment. For best results, and for maximum durability of the equipment, carefully read and follow all instructions.
- Page 2 I. Table of Content I.Getting Started II.Specifications III.Panel Description IV.General Structure V.Installation VI.Using the Balance VII.Internal Settings VIII.Maintenance and Cleaning U.S. Solid®• Page 1 USS-DBS Models • All Rights Reserved • U.S. Solid® • 4560 Johnston Parkway, Cleveland, OH, 44128 • www.ussolid.com...
-
Page 3: Getting Started
I. Getting Started Thank you for choosing U.S. Solid’s Analytical Balance. We hope you enjoy your purchase. Please maintain the equipment according to all instructions within the manual. This product was developed according to CE marking regulations while emphasizing aesthetics and safety for the user. It has ISO certification, specifically ISO 9001.The high quality of the product, coupled with proper user... -
Page 4: Specifications
RS232 Total 320*210*320(L*W*H) mm Dimensions Net Weight 7.2 kg AC110V-240V 50Hz/60Hz, Power DC9V-2A by using the universal adapter U.S. Solid®• Page 3 USS-DBS Models • All Rights Reserved • U.S. Solid® • 4560 Johnston Parkway, Cleveland, OH, 44128 • www.ussolid.com... - Page 5 RS232 Total 320*210*320(L*W*H) mm Dimensions 7.2 kg Net Weight AC110V-240V 50Hz/60Hz, Power DC9V-2A by using the universal adapter U.S. Solid®• Page 4 USS-DBS Models • All Rights Reserved • U.S. Solid® • 4560 Johnston Parkway, Cleveland, OH, 44128 • www.ussolid.com...
-
Page 6: Panel Description
RS232 interface Full capacity taring Overload protection Four different units of measure: g, mg, ct, oz Piece counting function U.S. Solid®• Page 5 USS-DBS Models • All Rights Reserved • U.S. Solid® • 4560 Johnston Parkway, Cleveland, OH, 44128 • www.ussolid.com... -
Page 7: General Structure
4.Do not use the balance anywhere exposed to explosive, combustible, or corrosive gases. U.S. Solid®• Page6 USS-DBS Models • All Rights Reserved • U.S. Solid® • 4560 Johnston Parkway, Cleveland, OH, 44128 • www.ussolid.com... -
Page 8: Using The Balance
The following are the adjustment tips: U.S. Solid®• Page 7 USS-DBS Models • All Rights Reserved • U.S. Solid® • 4560 Johnston Parkway, Cleveland, OH, 44128 • www.ussolid.com... - Page 9 1. Press the “ON” key, and the display will show 0.0000g. 2. Press “CAL” to enter the calibration mode; the value of the necessary weight U.S. Solid®• Page8 USS-DBS Models • All Rights Reserved • U.S. Solid® • 4560 Johnston Parkway, Cleveland, OH, 44128 • www.ussolid.com...
- Page 10 Long Press PRINT key to select the desired weighing unit from g, oz, ct and mg. Note:The default weighing unit is g. U.S. Solid®• Page 9 USS-DBS Models • All Rights Reserved • U.S. Solid® • 4560 Johnston Parkway, Cleveland, OH, 44128 • www.ussolid.com...
- Page 11 “-dEn-1-” open solid density weighing 3.Press “TARE” to save and exit the setup. The display shows W1 in the right U.S. Solid®• Page 10 USS-DBS Models • All Rights Reserved • U.S. Solid® • 4560 Johnston Parkway, Cleveland, OH, 44128 • www.ussolid.com...
-
Page 12: Internal Setting
• ASD-2 Common Sensitivity • ASD-3 Low Sensitivity (Use in poor conditions) To change the sensitivity on the balance: U.S. Solid®• Page 11 USS-DBS Models • All Rights Reserved • U.S. Solid® • 4560 Johnston Parkway, Cleveland, OH, 44128 • www.ussolid.com... - Page 13 2. Release when ‘SET-P’ is displayed 3. Press and hold the PRINT button until the desired output rate is U.S. Solid®• Page 12 USS-DBS Models • All Rights Reserved • U.S. Solid® • 4560 Johnston Parkway, Cleveland, OH, 44128 • www.ussolid.com...
- Page 14 • Data output is in continuous mode by default, the data output mode can be changed (see data output setting) Line Feed U.S. Solid®• Page 13 USS-DBS Models • All Rights Reserved • U.S. Solid® • 4560 Johnston Parkway, Cleveland, OH, 44128 • www.ussolid.com...
-
Page 15: Maintenance And Cleaning
ATTENTION!! If equipment is not properly cleaned and cared for, technical service will be unable to fix or repair issues. U.S. Solid®• Page 14 USS-DBS Models • All Rights Reserved • U.S. Solid® • 4560 Johnston Parkway, Cleveland, OH, 44128 • www.ussolid.com... - Page 16 Make sure the receptacle mass considered has been tared out Uneven surface Make sure balance is on a flat, even surface U.S. Solid®• Page 15 USS-DBS Models • All Rights Reserved • U.S. Solid® • 4560 Johnston Parkway, Cleveland, OH, 44128 • www.ussolid.com...
- Page 17 Please inquire with your local community authorities for the proper disposal location. U.S. Solid®• Page 16 USS-DBS Models • All Rights Reserved • U.S. Solid® • 4560 Johnston Parkway, Cleveland, OH, 44128 • www.ussolid.com...
Need help?
Do you have a question about the USS-DBS72-1.2 and is the answer not in the manual?
Questions and answers