Advertisement
Quick Links
Round Dining Table
Assembly Guide
BRT36
BRT48
CRT36
CRT48
DRT36
DRT48
HARDWARE INCLUDED
A
1/4-20 x 2"
B
1/4-20 x 2.5"
C
1/4-20 x 5"
D
2" UMBRELLA GROMMET
A
Foot 2
A
Foot 1
For information on Care and Cleaning or to Register your product, please visit
Qty: 4
Qty: 4
Qty: 1
1. Assemble Feet together like the image to the left.
Foot 1
This will require (4) A Bolts.
A
Note: The feet with the extra holes need to be across
from each other as shown here.
Foot 2
A
2. Attach the Leg Assembly to the
Foot Assembly using (2) C Bolts.
3. Repeat for the other Leg Assembly.
Note: Make sure the notch in the Leg
Assembly is facing in.
www.highwood-usa.com.
Qty: 4
DO NOT fully tighten bolts until all bolts are started.
Leg Assembly
C
Foot Assembly
*Actual Style May Vary from
the One Pictured in this Guide
TOOLS INCLUDED
5/32" HEX KEY
IMPORTANT!
Notch
HDK-0079
08/01/2023
Advertisement
Related Manuals for highwood BRT36
Summary of Contents for highwood BRT36
- Page 1 Round Dining Table Assembly Guide BRT36 BRT48 CRT36 CRT48 DRT36 *Actual Style May Vary from the One Pictured in this Guide DRT48 HARDWARE INCLUDED TOOLS INCLUDED Qty: 4 1/4-20 x 2" Qty: 4 5/32" HEX KEY 1/4-20 x 2.5" Qty: 4 1/4-20 x 5"...
- Page 2 4. Attach the Tabletop to the Pedestal using (2) B Bolts. 5. Repeat on the other side. Pedestal Umbrella Grommet 6. Install Umbrella Grommet in the Tabletop. HDK-0079 For information on Care and Cleaning or to Register your product, please visit www.highwood-usa.com. 08/01/2023...
Need help?
Do you have a question about the BRT36 and is the answer not in the manual?
Questions and answers