highwood Sequoia Professional CM-PEDSQC1 Assembly Manual

Sequoia Professional
Round Table
Assembly Guide
NOTE: All 4 Leg Sections are Identical and Numbered for Order of Assembly Only.
NOTE: DO NOT Tighten Bolts Until Table is Fully Assembled.
1) Step 1: Attach Leg Section 1 to Leg Section 2 with (2) "A" Bolts.
2) Step 2: Attach Leg Section 2 to Leg Section 3 with (2) "A" Bolts.
3) Step 3: Attach Leg Section 3 to Leg Section 4 with (2) "A" Bolts.
4) Step 4: Attach Leg Section 4 to Leg Section 1 with (2) "A" Bolts.
SEQUOIA
PROFESSIONAL
by highwood
LEG SECTION 3
A
A
A
LEG SECTION 4
For information on Care and Cleaning or to register your
PROFESSIONAL
www.highwood-usa.com.
LEG SECTION 2
A
A
A
A
LEG SECTION 1
product by highwood , please visit
HARDWARE
A
1/4-20 X 3"
B
1/4-20 X 2"
C
IMPORTANT!
DO NOT fully tighten the bolts until all
bolts are started. Once all bolts are inserted,
go back & tighten all the bolts.
Retain these instructions for future reference
A
INCLUDED TOOLS
5/32" HEX KEY
SEQUOIA
X8
X4
X1
CM-PEDSQC1
CM-PEDSQD1
03.05.19
PAGE 1 OF 2