Breville BOV800 Instruction Booklet page 35

OPERATING YOUR BREVILLE SMART OVEN™ — REHEAT
The reheating temperature and time
4.
can be adjusted before or during the
reheating cycle.
The reheating temperature is
a)
displayed as the top figure on the
LCD screen.
Turn the TEMPERATURE dial to
adjust the baking temperature
in 5ºC increments, from 50ºC to
a maximum of 230ºC (or in the
Fahrenheit mode, 10ºF increments,
from 120ºF to a maximum 450ºF).
The reheating time is displayed
b)
as the bottom figure on the LCD
screen.
Turn the TIME dial to adjust the
reheating time in one minute
increments up to 1 hour, and in
5 minute increments between 1
and 2 hours.
NOTE: Your customised REHEAT
temperature and time settings will
remain in the memory of the oven until
you change them or unplug the oven
from the wall outlet. When the oven is
plugged back into the wall outlet, the
REHEAT function will automatically
return to the preset temperature of
'160°C', preset time of ':15 MINS' and
preset CONVECTION setting.
Press the START/CANCEL button
5.
to activate this setting. The button
surround will illuminate red and the
oven alert will sound.
The timer will be displayed and
6.
begin to count down in one minute
increments. The temperature and time
can be
adjusted during the reheating cycle by
turning the corresponding
TEMPERATURE or TIME dial.
BOV800 IB_FA.indd 35
At the end of the reheating cycle, the
7.
oven alert will sound three times and
the START/CANCEL button surround
will cease to illuminate.
THE OUTER SURFACE OF THE OVEN,
INCLUDING THE OVEN DOOR, IS HOT
DURING AND AFTER OPERATION.
ALWAYS USE PROTECTIVE HOT
PADS OR INSULATED OVEN MITTS
WHEN INSERTING, REMOVING OR
HANDLING ITEMS FROM THE OVEN.
The reheating cycle can be stopped at
8.
any time by pressing the START/
CANCEL button. This will cancel the
cycle and the button surround
illumination will go out.
35
21/4/09 11:39:23 AM