Page 1
DS100 Series Pole Clamp Pivot Single Pivot & Single Pivot Portrait/Landscape M4 x 10 mm M4 x 10 mm #8-32 3/32" 75-100mm (2.38mm) 1/2" 1/2" (13mm) (13mm) User Guide Gebruikersgids Benutzerhandbuch Guía del usuario ユーザーガイド Guida per l’utente Manuel de l’utilisateur 用户指南...
Page 2
Indien uw monitor voorzien is van een ander type schroef dan de M4 X 10 mm, gebruik dan beslist niet de door Ergotron geleverde M4 X 10mm schroeven of schroefknoppen, want deze kunnen de monitor beschadigen.
Page 3
CAUTION When adjusting Desk Stand height, make sure monitors are properly sup- ported to prevent them from sliding down too quickly. 3 of 5 888-47-058-00 rev. D • 08/19...
Page 4
Adjustment Ajuste Réglage Einstellung Instellen Regolazione 調整 调节 조절 IMPORTANT! This product will need tension adjustments once installation is complete. Make sure all equipment is properly installed on the product before attempting range of motion or tension adjustments. Any time equipment is added or changed on this product resulting in a di erent mounted weight, you should repeat the adjustment steps to ensure safe and optimum operation.
Page 5
For Warranty visit: www.ergotron.com/warranty For Service visit: www.ergotron.com For local customer care phone numbers visit: http://contact.ergotron.com Para acceder a la última versión de la Guía de instalación para el usuario, ingrese a www.ergotron.com Para Garantía, visite: www.ergotron.com/warranty Para servicio, visite: www.ergotron.com Para conocer los números telefónicos locales de atención al cliente, visite: http://contact.ergotron.com...
Need help?
Do you have a question about the DS100 Series and is the answer not in the manual?
Questions and answers