NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certiﬁ ed technician. Logos and trademarks used here in

are the properties of their respective owners.

WARNING

all of the guides in this compilation.

Need help?

Do you have a question about the MAESTRO Rr and is the answer not in the manual?

Questions and answers

Summary of Contents for iDataLink MAESTRO Rr

Page 1 Print only the pages for your vehicle using the advanced options in the Print menu. Install your Maestro RR according to the guide for your vehicle. WARNING Pressing the printer icon or “quick printing” this document will print all of the guides in this compilation.
Page 2 PRODUCTS REQUIRED PROGRAMMED FIRMWARE: SU1-RR-AS iDatalink Maestro RR Radio Replacement Interface iDatalink Maestro HRR-SU1 Installation Harness NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners.
Page 3 Subaru ForeSter Without NaV 2009-2013 WELCOME ADDITIONAL INFORMATION AND ACCESSORIES Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are HEAD UNIT ADAPTER: now a few simple steps away from ACC-HU-PIO1, SON1, KEN1, KEN2, ALP1 enjoying your new car radio with enhanced features.
Page 4 STEP 6 Remove the factory radio If using head unit adapter (sold separately), connect HRR- • Connect all the harnesses to the Maestro RR module then SU1 harness to adapter and skip to step 2. test your installation. • Unbox the aftermarket radio and locate its main harness.
Page 5 ** MANUAL TRANSMISSION ONLY BLUE WHITE STEP 4 OBDII CONNECTOR BLACK STEP 6 AMP TURN ON AMP TURN ON HRR-SU1 T-HARNESS NOT REQUIRED SUB IN SUB IN DATA CABLE AUDIO CABLE BACKUP CAM BACKUP CAM Automotive Data Solutions Inc. © 2024 SU1-RR-AS-(HRR-SU1)-EN maestro.idatalink.com...
Page 6 Wire Color Polarity Description Name Color Type Location Reverse 12 pin Brown/Yellow Passenger kick panel (alternate location) Reverse Brown/Yellow Passenger kick panel (harness to rear) 7 6 5 4 12 11 10 Automotive Data Solutions Inc. © 2024 SU1-RR-AS-(HRR-SU1)-EN maestro.idatalink.com...
Page 7 Wire Description Refer to camera/ Green/Red E-Brake LtGreen LtGreen radio manual Refer to camera/ Reverse Light* Purple/White Purple/White Green/White radio manual Steering Wheel Controls (DATA) Blue/Yellow Blue/Yellow Steering Wheel Controls (DATA) Blue/Yellow Blue/Yellow Automotive Data Solutions Inc. © 2024 SU1-RR-AS-(HRR-SU1)-EN maestro.idatalink.com...
Page 8 LED fashes 1 or more times, either red or green, when a steering wheel button is pressed : normal operation. • 1 RED ﬂash Module has no frmware. Flash module using Weblink Desktop and log in. Do NOT use DEMO MODE. • Normal operation (inactive). Automotive Data Solutions Inc. © 2024 SU1-RR-AS-(HRR-SU1)-EN maestro.idatalink.com...
Page 9 MAESTRO RR RESET PROCEDURE: Turn the key to the OFF position, then disconnect all connectors from the module. Press and hold the module’s programming button and connect all the connectors back to the module. Wait, the module’s LED will fash RED rapidly (this may take up to 10 seconds).
Page 10 PRODUCTS REQUIRED PROGRAMMED FIRMWARE: SU1-RR-AS iDatalink Maestro RR Radio Replacement Interface iDatalink Maestro HRR-SU1 Installation Harness NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners.
Page 11 Subaru ForeSter Without NaV With camera 2011-2013 WELCOME ADDITIONAL INFORMATION AND ACCESSORIES Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are HEAD UNIT ADAPTER: now a few simple steps away from ACC-HU-PIO1, SON1, KEN1, KEN2, ALP1 enjoying your new car radio with enhanced features.
Page 12 • Unbox the aftermarket radio and locate its main harness. • Cut and remove the black 20 pin connector from the HRR- • Connect all the harnesses to the Maestro RR module then SU1 T-harness and connect the wires, shown in the wiring test your installation.
Page 13 STEP 3 PASSENGER KICK PANEL PURPLE/WHITE ** BROWN/YELLOW ** MANUAL TRANSMISSION ONLY STEP 4 STEP 6 OBDII CONNECTOR BLACK AMP TURN ON AMP TURN ON HRR-SU1 T-HARNESS DATA NOT REQUIRED CABLE AUDIO CABLE Automotive Data Solutions Inc. © 2024 SU1-RR-AS-(HRR-SU1)-EN maestro.idatalink.com...
Page 14 Wire Color Polarity Description Name Color Type Location Reverse 12 pin Brown/Yellow Passenger kick panel (alternate location) Reverse Brown/Yellow Passenger kick panel (harness to rear) 7 6 5 4 12 11 10 Automotive Data Solutions Inc. © 2024 SU1-RR-AS-(HRR-SU1)-EN maestro.idatalink.com...
Page 15 Wire Description Refer to camera/ Green/Red E-Brake LtGreen LtGreen radio manual Refer to camera/ Reverse Light* Purple/White Purple/White Green/White radio manual Steering Wheel Controls (DATA) Blue/Yellow Blue/Yellow Steering Wheel Controls (DATA) Blue/Yellow Blue/Yellow Automotive Data Solutions Inc. © 2024 SU1-RR-AS-(HRR-SU1)-EN maestro.idatalink.com...
Page 16 LED fashes 1 or more times, either red or green, when a steering wheel button is pressed : normal operation. • 1 RED ﬂash Module has no frmware. Flash module using Weblink Desktop and log in. Do NOT use DEMO MODE. • Normal operation (inactive). Automotive Data Solutions Inc. © 2024 SU1-RR-AS-(HRR-SU1)-EN maestro.idatalink.com...
Page 17 MAESTRO RR RESET PROCEDURE: Turn the key to the OFF position, then disconnect all connectors from the module. Press and hold the module’s programming button and connect all the connectors back to the module. Wait, the module’s LED will fash RED rapidly (this may take up to 10 seconds).
Page 18 PRODUCTS REQUIRED PROGRAMMED FIRMWARE: SU1-RR-AS iDatalink Maestro RR Radio Replacement Interface iDatalink Maestro HRR-SU1 Installation Harness NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners.
Page 19 Subaru Impreza WIthout NaV 2008-2011 WELCOME ADDITIONAL INFORMATION AND ACCESSORIES Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are HEAD UNIT ADAPTER: now a few simple steps away from ACC-HU-PIO1, SON1, KEN1, KEN2, ALP1 enjoying your new car radio with enhanced features.
Page 20 STEP 6 Remove the factory radio If using head unit adapter (sold separately), connect HRR- • Connect all the harnesses to the Maestro RR module then SU1 harness to adapter and skip to step 2. test your installation. • Unbox the aftermarket radio and locate its main harness.
Page 21 ** MANUAL TRANSMISSION ONLY BLUE WHITE STEP 4 OBDII CONNECTOR BLACK STEP 6 AMP TURN ON AMP TURN ON HRR-SU1 T-HARNESS NOT REQUIRED SUB IN SUB IN DATA CABLE AUDIO CABLE BACKUP CAM BACKUP CAM Automotive Data Solutions Inc. © 2024 SU1-RR-AS-(HRR-SU1)-EN maestro.idatalink.com...
Page 22 Wire Color Polarity Description Name Color Type Location Reverse 12 pin Brown/Yellow Passenger kick panel (alternate location) Reverse Brown/Yellow Passenger kick panel (harness to rear) 7 6 5 4 12 11 10 Automotive Data Solutions Inc. © 2024 SU1-RR-AS-(HRR-SU1)-EN maestro.idatalink.com...
Page 23 Wire Description Refer to camera/ Green/Red E-Brake LtGreen LtGreen radio manual Refer to camera/ Reverse Light* Purple/White Purple/White Green/White radio manual Steering Wheel Controls (DATA) Blue/Yellow Blue/Yellow Steering Wheel Controls (DATA) Blue/Yellow Blue/Yellow Automotive Data Solutions Inc. © 2024 SU1-RR-AS-(HRR-SU1)-EN maestro.idatalink.com...
Page 24 LED fashes 1 or more times, either red or green, when a steering wheel button is pressed : normal operation. • 1 RED ﬂash Module has no frmware. Flash module using Weblink Desktop and log in. Do NOT use DEMO MODE. • Normal operation (inactive). Automotive Data Solutions Inc. © 2024 SU1-RR-AS-(HRR-SU1)-EN maestro.idatalink.com...
Page 25 MAESTRO RR RESET PROCEDURE: Turn the key to the OFF position, then disconnect all connectors from the module. Press and hold the module’s programming button and connect all the connectors back to the module. Wait, the module’s LED will fash RED rapidly (this may take up to 10 seconds).
Page 26 PRODUCTS REQUIRED PROGRAMMED FIRMWARE: SU1-RR-AS iDatalink Maestro RR Radio Replacement Interface iDatalink Maestro HRR-SU1 Installation Harness NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners.
Page 27 Subaru Legacy baSe 2010-2014 WELCOME ADDITIONAL INFORMATION AND ACCESSORIES Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are HEAD UNIT ADAPTER: now a few simple steps away from ACC-HU-PIO1, SON1, KEN1, KEN2, ALP1 enjoying your new car radio with enhanced features.
Page 28 If using head unit adapter (sold separately), connect HRR- SU1 harness to adapter and skip to step 2. STEP 6 • Connect all the harnesses to the Maestro RR module then • Unbox the aftermarket radio and locate its main harness. test your installation.
Page 29 SEE VEHICLE WIRE REFERENCE CHART FOR AN ALTERNATE LOCATION STEP 4 OBDII CONNECTOR STEP 6 BLACK AMP TURN ON AMP TURN ON HRR-SU1 T-HARNESS NOT REQUIRED DATA CABLE AUDIO CABLE SUB IN SUB IN Automotive Data Solutions Inc. © 2024 SU1-RR-AS-(HRR-SU1)-EN maestro.idatalink.com...
Page 30 Type Location Reverse B281 35 pin Brown/Yellow BIU, right of steering column (alternate location) Reverse Brown/Yellow Driver kick panel B281 B281 19 18 17 16 15 14 13 12 11 10 9 Automotive Data Solutions Inc. © 2024 SU1-RR-AS-(HRR-SU1)-EN maestro.idatalink.com...
Page 31 Wire Description Refer to camera/ Green/Red E-Brake LtGreen LtGreen radio manual Refer to camera/ Reverse Light* Purple/White Purple/White Green/White radio manual Steering Wheel Controls (DATA) Blue/Yellow Blue/Yellow Steering Wheel Controls (DATA) Blue/Yellow Blue/Yellow Automotive Data Solutions Inc. © 2024 SU1-RR-AS-(HRR-SU1)-EN maestro.idatalink.com...
Page 32 LED fashes 1 or more times, either red or green, when a steering wheel button is pressed : normal operation. • 1 RED ﬂash Module has no frmware. Flash module using Weblink Desktop and log in. Do NOT use DEMO MODE. • Normal operation (inactive). Automotive Data Solutions Inc. © 2024 SU1-RR-AS-(HRR-SU1)-EN maestro.idatalink.com...
Page 33 MAESTRO RR RESET PROCEDURE: Turn the key to the OFF position, then disconnect all connectors from the module. Press and hold the module’s programming button and connect all the connectors back to the module. Wait, the module’s LED will fash RED rapidly (this may take up to 10 seconds).
Page 34 PRODUCTS REQUIRED PROGRAMMED FIRMWARE: SU1-RR-AS iDatalink Maestro RR Radio Replacement Interface iDatalink Maestro HRR-SU1 Installation Harness NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners.
Page 35 Subaru Legacy With ampLifier With NaV 2010-2012 WELCOME ADDITIONAL INFORMATION AND ACCESSORIES Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are HEAD UNIT ADAPTER: now a few simple steps away from ACC-HU-PIO1, SON1, KEN1, KEN2, ALP1 enjoying your new car radio with enhanced features.
Page 36 • Unbox the aftermarket radio and locate its main harness. • Cut and remove the black 20 pin connector from the HRR- • Connect all the harnesses to the Maestro RR module then SU1 T-harness and connect the wires, shown in the wiring test your installation.
Page 37 SEE VEHICLE WIRE REFERENCE CHART FOR AN ALTERNATE LOCATION STEP 4 STEP 6 OBDII CONNECTOR BLACK AMP TURN ON AMP TURN ON HRR-SU1 T-HARNESS DATA NOT REQUIRED CABLE AUDIO SUB IN SUB IN CABLE Automotive Data Solutions Inc. © 2024 SU1-RR-AS-(HRR-SU1)-EN maestro.idatalink.com...
Page 38 Type Location Reverse B281 35 pin Brown/Yellow BIU, right of steering column (alternate location) Reverse Brown/Yellow Driver kick panel B281 B281 19 18 17 16 15 14 13 12 11 10 9 Automotive Data Solutions Inc. © 2024 SU1-RR-AS-(HRR-SU1)-EN maestro.idatalink.com...
Page 39 Wire Description Refer to camera/ Green/Red E-Brake LtGreen LtGreen radio manual Refer to camera/ Reverse Light* Purple/White Purple/White Green/White radio manual Steering Wheel Controls (DATA) Blue/Yellow Blue/Yellow Steering Wheel Controls (DATA) Blue/Yellow Blue/Yellow Automotive Data Solutions Inc. © 2024 SU1-RR-AS-(HRR-SU1)-EN maestro.idatalink.com...
Page 40 LED fashes 1 or more times, either red or green, when a steering wheel button is pressed : normal operation. • 1 RED ﬂash Module has no frmware. Flash module using Weblink Desktop and log in. Do NOT use DEMO MODE. • Normal operation (inactive). Automotive Data Solutions Inc. © 2024 SU1-RR-AS-(HRR-SU1)-EN maestro.idatalink.com...
Page 41 MAESTRO RR RESET PROCEDURE: Turn the key to the OFF position, then disconnect all connectors from the module. Press and hold the module’s programming button and connect all the connectors back to the module. Wait, the module’s LED will fash RED rapidly (this may take up to 10 seconds).
Page 42 PRODUCTS REQUIRED PROGRAMMED FIRMWARE: SU1-RR-AS iDatalink Maestro RR Radio Replacement Interface iDatalink Maestro HRR-SU1 Installation Harness NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners.
Page 43 Subaru Legacy With ampLifier Without NaV 2010-2011 WELCOME ADDITIONAL INFORMATION AND ACCESSORIES Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are HEAD UNIT ADAPTER: now a few simple steps away from ACC-HU-PIO1, SON1, KEN1, KEN2, ALP1 enjoying your new car radio with enhanced features.
Page 44 • Unbox the aftermarket radio and locate its main harness. • Cut and remove the black 20 pin connector from the HRR- • Connect all the harnesses to the Maestro RR module then SU1 T-harness and connect the wires, shown in the wiring test your installation.
Page 45 SEE VEHICLE WIRE REFERENCE CHART FOR AN ALTERNATE LOCATION STEP 4 STEP 6 OBDII CONNECTOR BLACK AMP TURN ON AMP TURN ON HRR-SU1 T-HARNESS DATA NOT REQUIRED CABLE AUDIO SUB IN SUB IN CABLE Automotive Data Solutions Inc. © 2024 SU1-RR-AS-(HRR-SU1)-EN maestro.idatalink.com...
Page 46 Type Location Reverse B281 35 pin Brown/Yellow BIU, right of steering column (alternate location) Reverse Brown/Yellow Driver kick panel B281 B281 19 18 17 16 15 14 13 12 11 10 9 Automotive Data Solutions Inc. © 2024 SU1-RR-AS-(HRR-SU1)-EN maestro.idatalink.com...
Page 47 Wire Description Refer to camera/ Green/Red E-Brake LtGreen LtGreen radio manual Refer to camera/ Reverse Light* Purple/White Purple/White Green/White radio manual Steering Wheel Controls (DATA) Blue/Yellow Blue/Yellow Steering Wheel Controls (DATA) Blue/Yellow Blue/Yellow Automotive Data Solutions Inc. © 2024 SU1-RR-AS-(HRR-SU1)-EN maestro.idatalink.com...
Page 48 LED fashes 1 or more times, either red or green, when a steering wheel button is pressed : normal operation. • 1 RED ﬂash Module has no frmware. Flash module using Weblink Desktop and log in. Do NOT use DEMO MODE. • Normal operation (inactive). Automotive Data Solutions Inc. © 2024 SU1-RR-AS-(HRR-SU1)-EN maestro.idatalink.com...
Page 49 MAESTRO RR RESET PROCEDURE: Turn the key to the OFF position, then disconnect all connectors from the module. Press and hold the module’s programming button and connect all the connectors back to the module. Wait, the module’s LED will fash RED rapidly (this may take up to 10 seconds).
Page 50 PRODUCTS REQUIRED PROGRAMMED FIRMWARE: SU1-RR-AS iDatalink Maestro RR Radio Replacement Interface iDatalink Maestro HRR-SU1 Installation Harness NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners.
Page 51 Subaru Outback baSe 2010-2014 WELCOME ADDITIONAL INFORMATION AND ACCESSORIES Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are HEAD UNIT ADAPTER: now a few simple steps away from ACC-HU-PIO1, SON1, KEN1, KEN2, ALP1 enjoying your new car radio with enhanced features.
Page 52 If using head unit adapter (sold separately), connect HRR- SU1 harness to adapter and skip to step 2. STEP 6 • Connect all the harnesses to the Maestro RR module then • Unbox the aftermarket radio and locate its main harness. test your installation.
Page 53 SEE VEHICLE WIRE REFERENCE CHART FOR AN ALTERNATE LOCATION STEP 4 OBDII CONNECTOR STEP 6 BLACK AMP TURN ON AMP TURN ON HRR-SU1 T-HARNESS NOT REQUIRED DATA CABLE AUDIO CABLE SUB IN SUB IN Automotive Data Solutions Inc. © 2024 SU1-RR-AS-(HRR-SU1)-EN maestro.idatalink.com...
Page 54 Type Location Reverse B281 35 pin Brown/Yellow BIU, right of steering column (alternate location) Reverse Brown/Yellow Driver kick panel B281 B281 19 18 17 16 15 14 13 12 11 10 9 Automotive Data Solutions Inc. © 2024 SU1-RR-AS-(HRR-SU1)-EN maestro.idatalink.com...
Page 55 Wire Description Refer to camera/ Green/Red E-Brake LtGreen LtGreen radio manual Refer to camera/ Reverse Light* Purple/White Purple/White Green/White radio manual Steering Wheel Controls (DATA) Blue/Yellow Blue/Yellow Steering Wheel Controls (DATA) Blue/Yellow Blue/Yellow Automotive Data Solutions Inc. © 2024 SU1-RR-AS-(HRR-SU1)-EN maestro.idatalink.com...
Page 56 LED fashes 1 or more times, either red or green, when a steering wheel button is pressed : normal operation. • 1 RED ﬂash Module has no frmware. Flash module using Weblink Desktop and log in. Do NOT use DEMO MODE. • Normal operation (inactive). Automotive Data Solutions Inc. © 2024 SU1-RR-AS-(HRR-SU1)-EN maestro.idatalink.com...
Page 57 MAESTRO RR RESET PROCEDURE: Turn the key to the OFF position, then disconnect all connectors from the module. Press and hold the module’s programming button and connect all the connectors back to the module. Wait, the module’s LED will fash RED rapidly (this may take up to 10 seconds).
Page 58 PRODUCTS REQUIRED PROGRAMMED FIRMWARE: SU1-RR-AS iDatalink Maestro RR Radio Replacement Interface iDatalink Maestro HRR-SU1 Installation Harness NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners.
Page 59 Subaru Outback With amplifier With NaV 2010-2012 WELCOME ADDITIONAL INFORMATION AND ACCESSORIES Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are HEAD UNIT ADAPTER: now a few simple steps away from ACC-HU-PIO1, SON1, KEN1, KEN2, ALP1 enjoying your new car radio with enhanced features.
Page 60 • Unbox the aftermarket radio and locate its main harness. • Cut and remove the black 20 pin connector from the HRR- • Connect all the harnesses to the Maestro RR module then SU1 T-harness and connect the wires, shown in the wiring test your installation.
Page 61 SEE VEHICLE WIRE REFERENCE CHART FOR AN ALTERNATE LOCATION STEP 4 STEP 6 OBDII CONNECTOR BLACK AMP TURN ON AMP TURN ON HRR-SU1 T-HARNESS DATA NOT REQUIRED CABLE AUDIO SUB IN SUB IN CABLE Automotive Data Solutions Inc. © 2024 SU1-RR-AS-(HRR-SU1)-EN maestro.idatalink.com...
Page 62 Type Location Reverse B281 35 pin Brown/Yellow BIU, right of steering column (alternate location) Reverse Brown/Yellow Driver kick panel B281 B281 19 18 17 16 15 14 13 12 11 10 9 Automotive Data Solutions Inc. © 2024 SU1-RR-AS-(HRR-SU1)-EN maestro.idatalink.com...
Page 63 Wire Description Refer to camera/ Green/Red E-Brake LtGreen LtGreen radio manual Refer to camera/ Reverse Light* Purple/White Purple/White Green/White radio manual Steering Wheel Controls (DATA) Blue/Yellow Blue/Yellow Steering Wheel Controls (DATA) Blue/Yellow Blue/Yellow Automotive Data Solutions Inc. © 2024 SU1-RR-AS-(HRR-SU1)-EN maestro.idatalink.com...
Page 64 LED fashes 1 or more times, either red or green, when a steering wheel button is pressed : normal operation. • 1 RED ﬂash Module has no frmware. Flash module using Weblink Desktop and log in. Do NOT use DEMO MODE. • Normal operation (inactive). Automotive Data Solutions Inc. © 2024 SU1-RR-AS-(HRR-SU1)-EN maestro.idatalink.com...
Page 65 MAESTRO RR RESET PROCEDURE: Turn the key to the OFF position, then disconnect all connectors from the module. Press and hold the module’s programming button and connect all the connectors back to the module. Wait, the module’s LED will fash RED rapidly (this may take up to 10 seconds).
Page 66 PRODUCTS REQUIRED PROGRAMMED FIRMWARE: SU1-RR-AS iDatalink Maestro RR Radio Replacement Interface iDatalink Maestro HRR-SU1 Installation Harness NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners.
Page 67 Subaru Outback With amplifier WithOut NaV 2010-2011 WELCOME ADDITIONAL INFORMATION AND ACCESSORIES Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are HEAD UNIT ADAPTER: now a few simple steps away from ACC-HU-PIO1, SON1, KEN1, KEN2, ALP1 enjoying your new car radio with enhanced features.
Page 68 • Unbox the aftermarket radio and locate its main harness. • Cut and remove the black 20 pin connector from the HRR- • Connect all the harnesses to the Maestro RR module then SU1 T-harness and connect the wires, shown in the wiring test your installation.
Page 69 SEE VEHICLE WIRE REFERENCE CHART FOR AN ALTERNATE LOCATION STEP 4 STEP 6 OBDII CONNECTOR BLACK AMP TURN ON AMP TURN ON HRR-SU1 T-HARNESS DATA NOT REQUIRED CABLE AUDIO SUB IN SUB IN CABLE Automotive Data Solutions Inc. © 2024 SU1-RR-AS-(HRR-SU1)-EN maestro.idatalink.com...
Page 70 Type Location Reverse B281 35 pin Brown/Yellow BIU, right of steering column (alternate location) Reverse Brown/Yellow Driver kick panel B281 B281 19 18 17 16 15 14 13 12 11 10 9 Automotive Data Solutions Inc. © 2024 SU1-RR-AS-(HRR-SU1)-EN maestro.idatalink.com...
Page 71 Wire Description Refer to camera/ Green/Red E-Brake LtGreen LtGreen radio manual Refer to camera/ Reverse Light* Purple/White Purple/White Green/White radio manual Steering Wheel Controls (DATA) Blue/Yellow Blue/Yellow Steering Wheel Controls (DATA) Blue/Yellow Blue/Yellow Automotive Data Solutions Inc. © 2024 SU1-RR-AS-(HRR-SU1)-EN maestro.idatalink.com...
Page 72 LED fashes 1 or more times, either red or green, when a steering wheel button is pressed : normal operation. • 1 RED ﬂash Module has no frmware. Flash module using Weblink Desktop and log in. Do NOT use DEMO MODE. • Normal operation (inactive). Automotive Data Solutions Inc. © 2024 SU1-RR-AS-(HRR-SU1)-EN maestro.idatalink.com...
Page 73 MAESTRO RR RESET PROCEDURE: Turn the key to the OFF position, then disconnect all connectors from the module. Press and hold the module’s programming button and connect all the connectors back to the module. Wait, the module’s LED will fash RED rapidly (this may take up to 10 seconds).
Page 74 PRODUCTS REQUIRED PROGRAMMED FIRMWARE: SU1-RR-AS iDatalink Maestro RR Radio Replacement Interface iDatalink Maestro HRR-SU1 Installation Harness NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners.
Page 75 Subaru WrX STI WIThouT NaV 2008-2014 WELCOME ADDITIONAL INFORMATION AND ACCESSORIES Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are HEAD UNIT ADAPTER: now a few simple steps away from ACC-HU-PIO1, SON1, KEN1, KEN2, ALP1 enjoying your new car radio with enhanced features.
Page 76 STEP 6 Remove the factory radio If using head unit adapter (sold separately), connect HRR- • Connect all the harnesses to the Maestro RR module then SU1 harness to adapter and skip to step 2. test your installation. • Unbox the aftermarket radio and locate its main harness.
Page 77 ** MANUAL TRANSMISSION ONLY BLUE WHITE STEP 4 OBDII CONNECTOR BLACK STEP 6 AMP TURN ON AMP TURN ON HRR-SU1 T-HARNESS NOT REQUIRED SUB IN SUB IN DATA CABLE AUDIO CABLE BACKUP CAM BACKUP CAM Automotive Data Solutions Inc. © 2024 SU1-RR-AS-(HRR-SU1)-EN maestro.idatalink.com...
Page 78 Wire Color Polarity Description Name Color Type Location Reverse 12 pin Brown/Yellow Passenger kick panel (alternate location) Reverse Brown/Yellow Passenger kick panel (harness to rear) 7 6 5 4 12 11 10 Automotive Data Solutions Inc. © 2024 SU1-RR-AS-(HRR-SU1)-EN maestro.idatalink.com...
Page 79 Wire Description Refer to camera/ Green/Red E-Brake LtGreen LtGreen radio manual Refer to camera/ Reverse Light* Purple/White Purple/White Green/White radio manual Steering Wheel Controls (DATA) Blue/Yellow Blue/Yellow Steering Wheel Controls (DATA) Blue/Yellow Blue/Yellow Automotive Data Solutions Inc. © 2024 SU1-RR-AS-(HRR-SU1)-EN maestro.idatalink.com...
Page 80 LED fashes 1 or more times, either red or green, when a steering wheel button is pressed : normal operation. • 1 RED ﬂash Module has no frmware. Flash module using Weblink Desktop and log in. Do NOT use DEMO MODE. • Normal operation (inactive). Automotive Data Solutions Inc. © 2024 SU1-RR-AS-(HRR-SU1)-EN maestro.idatalink.com...
Page 81 MAESTRO RR RESET PROCEDURE: Turn the key to the OFF position, then disconnect all connectors from the module. Press and hold the module’s programming button and connect all the connectors back to the module. Wait, the module’s LED will fash RED rapidly (this may take up to 10 seconds).
Page 82 PRODUCTS REQUIRED PROGRAMMED FIRMWARE: SU1-RR-AS iDatalink Maestro RR Radio Replacement Interface iDatalink Maestro HRR-SU1 Installation Harness NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners.
Page 83 Subaru WrX Without NaV 2008-2014 WELCOME ADDITIONAL INFORMATION AND ACCESSORIES Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are HEAD UNIT ADAPTER: now a few simple steps away from ACC-HU-PIO1, SON1, KEN1, KEN2, ALP1 enjoying your new car radio with enhanced features.
Page 84 STEP 6 Remove the factory radio If using head unit adapter (sold separately), connect HRR- • Connect all the harnesses to the Maestro RR module then SU1 harness to adapter and skip to step 2. test your installation. • Unbox the aftermarket radio and locate its main harness.
Page 85 ** MANUAL TRANSMISSION ONLY BLUE WHITE STEP 4 OBDII CONNECTOR BLACK STEP 6 AMP TURN ON AMP TURN ON HRR-SU1 T-HARNESS NOT REQUIRED SUB IN SUB IN DATA CABLE AUDIO CABLE BACKUP CAM BACKUP CAM Automotive Data Solutions Inc. © 2024 SU1-RR-AS-(HRR-SU1)-EN maestro.idatalink.com...
Page 86 Wire Color Polarity Description Name Color Type Location Reverse 12 pin Brown/Yellow Passenger kick panel (alternate location) Reverse Brown/Yellow Passenger kick panel (harness to rear) 7 6 5 4 12 11 10 Automotive Data Solutions Inc. © 2024 SU1-RR-AS-(HRR-SU1)-EN maestro.idatalink.com...
Page 87 Wire Description Refer to camera/ Green/Red E-Brake LtGreen LtGreen radio manual Refer to camera/ Reverse Light* Purple/White Purple/White Green/White radio manual Steering Wheel Controls (DATA) Blue/Yellow Blue/Yellow Steering Wheel Controls (DATA) Blue/Yellow Blue/Yellow Automotive Data Solutions Inc. © 2024 SU1-RR-AS-(HRR-SU1)-EN maestro.idatalink.com...
Page 88 LED fashes 1 or more times, either red or green, when a steering wheel button is pressed : normal operation. • 1 RED ﬂash Module has no frmware. Flash module using Weblink Desktop and log in. Do NOT use DEMO MODE. • Normal operation (inactive). Automotive Data Solutions Inc. © 2024 SU1-RR-AS-(HRR-SU1)-EN maestro.idatalink.com...
Page 89 MAESTRO RR RESET PROCEDURE: Turn the key to the OFF position, then disconnect all connectors from the module. Press and hold the module’s programming button and connect all the connectors back to the module. Wait, the module’s LED will fash RED rapidly (this may take up to 10 seconds).
Page 90 Print only the pages for your vehicle using the advanced options in the Print menu. Install your Maestro RR according to the guide for your vehicle. WARNING Pressing the printer icon or “quick printing” this document will print all of the guides in this compilation.
Page 91 PRODUCTS REQUIRED PROGRAMMED FIRMWARE: SU1-RR-DS iDatalink Maestro RR Radio Replacement Interface iDatalink Maestro HRR-SU1 Installation Harness NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners.
Page 92 Subaru ForeSter Without NaV 2009-2013 WELCOME ADDITIONAL INFORMATION AND ACCESSORIES Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are HEAD UNIT ADAPTER: now a few simple steps away from ACC-HU-PIO1, SON1, KEN1, KEN2, ALP1 enjoying your new car radio with enhanced features.
Page 93 If using head unit adapter (sold separately), connect HRR- STEP 6 SU1 harness to adapter and skip to step 2. • Connect all the harnesses to the Maestro RR module then test your installation. • Unbox the aftermarket radio and locate its main harness.
Page 94 BLUE WHITE GREEN STEP 4 OBDII CONNECTOR BLACK STEP 6 AMP TURN ON AMP TURN ON HRR-SU1 T-HARNESS NOT REQUIRED SUB IN SUB IN STEERING WHEEL CONTROL CABLE BACKUP CAM BACKUP CAM Automotive Data Solutions Inc. © 2024 SU1-RR-DS-(HRR-SU1)-EN maestro.idatalink.com...
Page 95 Wire Color Polarity Description Name Color Type Location Reverse 12 pin Brown/Yellow Passenger kick panel (alternate location) Reverse Brown/Yellow Passenger kick panel (harness to rear) 7 6 5 4 12 11 10 Automotive Data Solutions Inc. © 2024 SU1-RR-DS-(HRR-SU1)-EN maestro.idatalink.com...
Page 96 Wire Color on Adapter Kenwood Radio Wire Description E-Brake LtGreen LtGreen Reverse Light* Purple/White Purple/White Steering Wheel Controls (DATA) Blue/Yellow * Reverse light wire: Only connect to radio or module damage will occur. Automotive Data Solutions Inc. © 2024 SU1-RR-DS-(HRR-SU1)-EN maestro.idatalink.com...
Page 97 Flash module using Weblink Desktop and log in. Do NOT use DEMO MODE. • 2 RED ﬂashes Problem detected. Consult troubleshooting table. • 1 GREEN ﬂash After radio boots up : Normal operation. • Normal operation (inactive). Automotive Data Solutions Inc. © 2024 SU1-RR-DS-(HRR-SU1)-EN maestro.idatalink.com...
Page 98 The light on the Maestro is blinking RED TWICE and the radio IS turning on. Ensure the 4-pin data cable is connected between the radio and the RR, and that it is plugged into the black port on the Maestro RR. The red and blue ports on the RR should be empty.
Page 99 PRODUCTS REQUIRED PROGRAMMED FIRMWARE: SU1-RR-DS iDatalink Maestro RR Radio Replacement Interface iDatalink Maestro HRR-SU1 Installation Harness NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners.
Page 100 Subaru ForeSter Without NaV With camera 2011-2013 WELCOME ADDITIONAL INFORMATION AND ACCESSORIES Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are HEAD UNIT ADAPTER: now a few simple steps away from ACC-HU-PIO1, SON1, KEN1, KEN2, ALP1 enjoying your new car radio with enhanced features.
Page 101 SU1 T-harness and connect the wires, shown in the wiring diagram, from aftermarket radio main harness to the HRR- • Connect all the harnesses to the Maestro RR module then SU1 T-harness and match the wire functions. test your installation.
Page 102 STEP 3 PASSENGER KICK PANEL PURPLE/WHITE ** BROWN/YELLOW ** MANUAL TRANSMISSION ONLY STEP 4 STEP 6 OBDII CONNECTOR BLACK AMP TURN ON AMP TURN ON HRR-SU1 T-HARNESS NOT REQUIRED STEERING WHEEL CONTROL CABLE Automotive Data Solutions Inc. © 2024 SU1-RR-DS-(HRR-SU1)-EN maestro.idatalink.com...
Page 103 Wire Color Polarity Description Name Color Type Location Reverse 12 pin Brown/Yellow Passenger kick panel (alternate location) Reverse Brown/Yellow Passenger kick panel (harness to rear) 7 6 5 4 12 11 10 Automotive Data Solutions Inc. © 2024 SU1-RR-DS-(HRR-SU1)-EN maestro.idatalink.com...
Page 104 Wire Color on Adapter Kenwood Radio Wire Description E-Brake LtGreen LtGreen Reverse Light* Purple/White Purple/White Steering Wheel Controls (DATA) Blue/Yellow * Reverse light wire: Only connect to radio or module damage will occur. Automotive Data Solutions Inc. © 2024 SU1-RR-DS-(HRR-SU1)-EN maestro.idatalink.com...
Page 105 Flash module using Weblink Desktop and log in. Do NOT use DEMO MODE. • 2 RED ﬂashes Problem detected. Consult troubleshooting table. • 1 GREEN ﬂash After radio boots up : Normal operation. • Normal operation (inactive). Automotive Data Solutions Inc. © 2024 SU1-RR-DS-(HRR-SU1)-EN maestro.idatalink.com...
Page 106 The light on the Maestro is blinking RED TWICE and the radio IS turning on. Ensure the 4-pin data cable is connected between the radio and the RR, and that it is plugged into the black port on the Maestro RR. The red and blue ports on the RR should be empty.
Page 107 PRODUCTS REQUIRED PROGRAMMED FIRMWARE: SU1-RR-DS iDatalink Maestro RR Radio Replacement Interface iDatalink Maestro HRR-SU1 Installation Harness NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners.
Page 108 Subaru Impreza WIthout NaV 2008-2011 WELCOME ADDITIONAL INFORMATION AND ACCESSORIES Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are HEAD UNIT ADAPTER: now a few simple steps away from ACC-HU-PIO1, SON1, KEN1, KEN2, ALP1 enjoying your new car radio with enhanced features.
Page 109 If using head unit adapter (sold separately), connect HRR- STEP 6 SU1 harness to adapter and skip to step 2. • Connect all the harnesses to the Maestro RR module then test your installation. • Unbox the aftermarket radio and locate its main harness.
Page 110 BLUE WHITE GREEN STEP 4 OBDII CONNECTOR BLACK STEP 6 AMP TURN ON AMP TURN ON HRR-SU1 T-HARNESS NOT REQUIRED SUB IN SUB IN STEERING WHEEL CONTROL CABLE BACKUP CAM BACKUP CAM Automotive Data Solutions Inc. © 2024 SU1-RR-DS-(HRR-SU1)-EN maestro.idatalink.com...
Page 111 Wire Color Polarity Description Name Color Type Location Reverse 12 pin Brown/Yellow Passenger kick panel (alternate location) Reverse Brown/Yellow Passenger kick panel (harness to rear) 7 6 5 4 12 11 10 Automotive Data Solutions Inc. © 2024 SU1-RR-DS-(HRR-SU1)-EN maestro.idatalink.com...
Page 112 Wire Color on Adapter Kenwood Radio Wire Description E-Brake LtGreen LtGreen Reverse Light* Purple/White Purple/White Steering Wheel Controls (DATA) Blue/Yellow * Reverse light wire: Only connect to radio or module damage will occur. Automotive Data Solutions Inc. © 2024 SU1-RR-DS-(HRR-SU1)-EN maestro.idatalink.com...
Page 113 Flash module using Weblink Desktop and log in. Do NOT use DEMO MODE. • 2 RED ﬂashes Problem detected. Consult troubleshooting table. • 1 GREEN ﬂash After radio boots up : Normal operation. • Normal operation (inactive). Automotive Data Solutions Inc. © 2024 SU1-RR-DS-(HRR-SU1)-EN maestro.idatalink.com...
Page 114 The light on the Maestro is blinking RED TWICE and the radio IS turning on. Ensure the 4-pin data cable is connected between the radio and the RR, and that it is plugged into the black port on the Maestro RR. The red and blue ports on the RR should be empty.
Page 115 PRODUCTS REQUIRED PROGRAMMED FIRMWARE: SU1-RR-DS iDatalink Maestro RR Radio Replacement Interface iDatalink Maestro HRR-SU1 Installation Harness NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners.
Page 116 Subaru Legacy baSe 2010-2014 WELCOME ADDITIONAL INFORMATION AND ACCESSORIES Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are HEAD UNIT ADAPTER: now a few simple steps away from ACC-HU-PIO1, SON1, KEN1, KEN2, ALP1 enjoying your new car radio with enhanced features.
Page 117 • Unbox the aftermarket radio and locate its main harness. • Cut and remove the black 20 pin connector from the HRR- • Connect all the harnesses to the Maestro RR module then SU1 T-harness and connect the wires, shown in the wiring test your installation.
Page 118 SEE VEHICLE WIRE REFERENCE CHART FOR AN ALTERNATE LOCATION STEP 4 OBDII CONNECTOR STEP 6 BLACK AMP TURN ON AMP TURN ON HRR-SU1 T-HARNESS NOT REQUIRED STEERING WHEEL CONTROL CABLE SUB IN SUB IN Automotive Data Solutions Inc. © 2024 SU1-RR-DS-(HRR-SU1)-EN maestro.idatalink.com...
Page 119 Type Location Reverse B281 35 pin Brown/Yellow BIU, right of steering column (alternate location) Reverse Brown/Yellow Driver kick panel B281 B281 19 18 17 16 15 14 13 12 11 10 9 Automotive Data Solutions Inc. © 2024 SU1-RR-DS-(HRR-SU1)-EN maestro.idatalink.com...
Page 120 Wire Color on Adapter Kenwood Radio Wire Description E-Brake LtGreen LtGreen Reverse Light* Purple/White Purple/White Steering Wheel Controls (DATA) Blue/Yellow * Reverse light wire: Only connect to radio or module damage will occur. Automotive Data Solutions Inc. © 2024 SU1-RR-DS-(HRR-SU1)-EN maestro.idatalink.com...
Page 121 Flash module using Weblink Desktop and log in. Do NOT use DEMO MODE. • 2 RED ﬂashes Problem detected. Consult troubleshooting table. • 1 GREEN ﬂash After radio boots up : Normal operation. • Normal operation (inactive). Automotive Data Solutions Inc. © 2024 SU1-RR-DS-(HRR-SU1)-EN maestro.idatalink.com...
Page 122 The light on the Maestro is blinking RED TWICE and the radio IS turning on. Ensure the 4-pin data cable is connected between the radio and the RR, and that it is plugged into the black port on the Maestro RR. The red and blue ports on the RR should be empty.
Page 123 PRODUCTS REQUIRED PROGRAMMED FIRMWARE: SU1-RR-DS iDatalink Maestro RR Radio Replacement Interface iDatalink Maestro HRR-SU1 Installation Harness NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners.
Page 124 Subaru Legacy With ampLifier With NaV 2010-2012 WELCOME ADDITIONAL INFORMATION AND ACCESSORIES Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are HEAD UNIT ADAPTER: now a few simple steps away from ACC-HU-PIO1, SON1, KEN1, KEN2, ALP1 enjoying your new car radio with enhanced features.
Page 125 SU1 T-harness and connect the wires, shown in the wiring diagram, from aftermarket radio main harness to the HRR- • Connect all the harnesses to the Maestro RR module then SU1 T-harness and match the wire functions. test your installation.
Page 126 SEE VEHICLE WIRE REFERENCE CHART FOR AN ALTERNATE LOCATION STEP 4 STEP 6 OBDII CONNECTOR BLACK AMP TURN ON AMP TURN ON HRR-SU1 T-HARNESS NOT REQUIRED STEERING WHEEL CONTROL CABLE SUB IN SUB IN Automotive Data Solutions Inc. © 2024 SU1-RR-DS-(HRR-SU1)-EN maestro.idatalink.com...
Page 127 Type Location Reverse B281 35 pin Brown/Yellow BIU, right of steering column (alternate location) Reverse Brown/Yellow Driver kick panel B281 B281 19 18 17 16 15 14 13 12 11 10 9 Automotive Data Solutions Inc. © 2024 SU1-RR-DS-(HRR-SU1)-EN maestro.idatalink.com...
Page 128 Wire Color on Adapter Kenwood Radio Wire Description E-Brake LtGreen LtGreen Reverse Light* Purple/White Purple/White Steering Wheel Controls (DATA) Blue/Yellow * Reverse light wire: Only connect to radio or module damage will occur. Automotive Data Solutions Inc. © 2024 SU1-RR-DS-(HRR-SU1)-EN maestro.idatalink.com...
Page 129 Flash module using Weblink Desktop and log in. Do NOT use DEMO MODE. • 2 RED ﬂashes Problem detected. Consult troubleshooting table. • 1 GREEN ﬂash After radio boots up : Normal operation. • Normal operation (inactive). Automotive Data Solutions Inc. © 2024 SU1-RR-DS-(HRR-SU1)-EN maestro.idatalink.com...
Page 130 The light on the Maestro is blinking RED TWICE and the radio IS turning on. Ensure the 4-pin data cable is connected between the radio and the RR, and that it is plugged into the black port on the Maestro RR. The red and blue ports on the RR should be empty.
Page 131 PRODUCTS REQUIRED PROGRAMMED FIRMWARE: SU1-RR-DS iDatalink Maestro RR Radio Replacement Interface iDatalink Maestro HRR-SU1 Installation Harness NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners.
Page 132 Subaru Legacy With ampLifier Without NaV 2010-2011 WELCOME ADDITIONAL INFORMATION AND ACCESSORIES Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are HEAD UNIT ADAPTER: now a few simple steps away from ACC-HU-PIO1, SON1, KEN1, KEN2, ALP1 enjoying your new car radio with enhanced features.
Page 133 SU1 T-harness and connect the wires, shown in the wiring diagram, from aftermarket radio main harness to the HRR- • Connect all the harnesses to the Maestro RR module then SU1 T-harness and match the wire functions. test your installation.
Page 134 SEE VEHICLE WIRE REFERENCE CHART FOR AN ALTERNATE LOCATION STEP 4 STEP 6 OBDII CONNECTOR BLACK AMP TURN ON AMP TURN ON HRR-SU1 T-HARNESS NOT REQUIRED STEERING WHEEL CONTROL CABLE SUB IN SUB IN Automotive Data Solutions Inc. © 2024 SU1-RR-DS-(HRR-SU1)-EN maestro.idatalink.com...
Page 135 Type Location Reverse B281 35 pin Brown/Yellow BIU, right of steering column (alternate location) Reverse Brown/Yellow Driver kick panel B281 B281 19 18 17 16 15 14 13 12 11 10 9 Automotive Data Solutions Inc. © 2024 SU1-RR-DS-(HRR-SU1)-EN maestro.idatalink.com...
Page 136 Wire Color on Adapter Kenwood Radio Wire Description E-Brake LtGreen LtGreen Reverse Light* Purple/White Purple/White Steering Wheel Controls (DATA) Blue/Yellow * Reverse light wire: Only connect to radio or module damage will occur. Automotive Data Solutions Inc. © 2024 SU1-RR-DS-(HRR-SU1)-EN maestro.idatalink.com...
Page 137 Flash module using Weblink Desktop and log in. Do NOT use DEMO MODE. • 2 RED ﬂashes Problem detected. Consult troubleshooting table. • 1 GREEN ﬂash After radio boots up : Normal operation. • Normal operation (inactive). Automotive Data Solutions Inc. © 2024 SU1-RR-DS-(HRR-SU1)-EN maestro.idatalink.com...
Page 138 The light on the Maestro is blinking RED TWICE and the radio IS turning on. Ensure the 4-pin data cable is connected between the radio and the RR, and that it is plugged into the black port on the Maestro RR. The red and blue ports on the RR should be empty.
Page 139 PRODUCTS REQUIRED PROGRAMMED FIRMWARE: SU1-RR-DS iDatalink Maestro RR Radio Replacement Interface iDatalink Maestro HRR-SU1 Installation Harness NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners.
Page 140 Subaru Outback baSe 2010-2014 WELCOME ADDITIONAL INFORMATION AND ACCESSORIES Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are HEAD UNIT ADAPTER: now a few simple steps away from ACC-HU-PIO1, SON1, KEN1, KEN2, ALP1 enjoying your new car radio with enhanced features.
Page 141 • Unbox the aftermarket radio and locate its main harness. • Cut and remove the black 20 pin connector from the HRR- • Connect all the harnesses to the Maestro RR module then SU1 T-harness and connect the wires, shown in the wiring test your installation.
Page 142 SEE VEHICLE WIRE REFERENCE CHART FOR AN ALTERNATE LOCATION STEP 4 OBDII CONNECTOR STEP 6 BLACK AMP TURN ON AMP TURN ON HRR-SU1 T-HARNESS NOT REQUIRED STEERING WHEEL CONTROL CABLE SUB IN SUB IN Automotive Data Solutions Inc. © 2024 SU1-RR-DS-(HRR-SU1)-EN maestro.idatalink.com...
Page 143 Type Location Reverse B281 35 pin Brown/Yellow BIU, right of steering column (alternate location) Reverse Brown/Yellow Driver kick panel B281 B281 19 18 17 16 15 14 13 12 11 10 9 Automotive Data Solutions Inc. © 2024 SU1-RR-DS-(HRR-SU1)-EN maestro.idatalink.com...
Page 144 Wire Color on Adapter Kenwood Radio Wire Description E-Brake LtGreen LtGreen Reverse Light* Purple/White Purple/White Steering Wheel Controls (DATA) Blue/Yellow * Reverse light wire: Only connect to radio or module damage will occur. Automotive Data Solutions Inc. © 2024 SU1-RR-DS-(HRR-SU1)-EN maestro.idatalink.com...
Page 145 Flash module using Weblink Desktop and log in. Do NOT use DEMO MODE. • 2 RED ﬂashes Problem detected. Consult troubleshooting table. • 1 GREEN ﬂash After radio boots up : Normal operation. • Normal operation (inactive). Automotive Data Solutions Inc. © 2024 SU1-RR-DS-(HRR-SU1)-EN maestro.idatalink.com...
Page 146 The light on the Maestro is blinking RED TWICE and the radio IS turning on. Ensure the 4-pin data cable is connected between the radio and the RR, and that it is plugged into the black port on the Maestro RR. The red and blue ports on the RR should be empty.
Page 147 PRODUCTS REQUIRED PROGRAMMED FIRMWARE: SU1-RR-DS iDatalink Maestro RR Radio Replacement Interface iDatalink Maestro HRR-SU1 Installation Harness NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners.
Page 148 Subaru Outback With amplifier With NaV 2010-2012 WELCOME ADDITIONAL INFORMATION AND ACCESSORIES Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are HEAD UNIT ADAPTER: now a few simple steps away from ACC-HU-PIO1, SON1, KEN1, KEN2, ALP1 enjoying your new car radio with enhanced features.
Page 149 SU1 T-harness and connect the wires, shown in the wiring diagram, from aftermarket radio main harness to the HRR- • Connect all the harnesses to the Maestro RR module then SU1 T-harness and match the wire functions. test your installation.
Page 150 SEE VEHICLE WIRE REFERENCE CHART FOR AN ALTERNATE LOCATION STEP 4 STEP 6 OBDII CONNECTOR BLACK AMP TURN ON AMP TURN ON HRR-SU1 T-HARNESS NOT REQUIRED STEERING WHEEL CONTROL CABLE SUB IN SUB IN Automotive Data Solutions Inc. © 2024 SU1-RR-DS-(HRR-SU1)-EN maestro.idatalink.com...
Page 151 Type Location Reverse B281 35 pin Brown/Yellow BIU, right of steering column (alternate location) Reverse Brown/Yellow Driver kick panel B281 B281 19 18 17 16 15 14 13 12 11 10 9 Automotive Data Solutions Inc. © 2024 SU1-RR-DS-(HRR-SU1)-EN maestro.idatalink.com...
Page 152 Wire Color on Adapter Kenwood Radio Wire Description E-Brake LtGreen LtGreen Reverse Light* Purple/White Purple/White Steering Wheel Controls (DATA) Blue/Yellow * Reverse light wire: Only connect to radio or module damage will occur. Automotive Data Solutions Inc. © 2024 SU1-RR-DS-(HRR-SU1)-EN maestro.idatalink.com...
Page 153 Flash module using Weblink Desktop and log in. Do NOT use DEMO MODE. • 2 RED ﬂashes Problem detected. Consult troubleshooting table. • 1 GREEN ﬂash After radio boots up : Normal operation. • Normal operation (inactive). Automotive Data Solutions Inc. © 2024 SU1-RR-DS-(HRR-SU1)-EN maestro.idatalink.com...
Page 154 The light on the Maestro is blinking RED TWICE and the radio IS turning on. Ensure the 4-pin data cable is connected between the radio and the RR, and that it is plugged into the black port on the Maestro RR. The red and blue ports on the RR should be empty.
Page 155 PRODUCTS REQUIRED PROGRAMMED FIRMWARE: SU1-RR-DS iDatalink Maestro RR Radio Replacement Interface iDatalink Maestro HRR-SU1 Installation Harness NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners.
Page 156 Subaru Outback With amplifier WithOut NaV 2010-2011 WELCOME ADDITIONAL INFORMATION AND ACCESSORIES Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are HEAD UNIT ADAPTER: now a few simple steps away from ACC-HU-PIO1, SON1, KEN1, KEN2, ALP1 enjoying your new car radio with enhanced features.
Page 157 SU1 T-harness and connect the wires, shown in the wiring diagram, from aftermarket radio main harness to the HRR- • Connect all the harnesses to the Maestro RR module then SU1 T-harness and match the wire functions. test your installation.
Page 158 SEE VEHICLE WIRE REFERENCE CHART FOR AN ALTERNATE LOCATION STEP 4 STEP 6 OBDII CONNECTOR BLACK AMP TURN ON AMP TURN ON HRR-SU1 T-HARNESS NOT REQUIRED STEERING WHEEL CONTROL CABLE SUB IN SUB IN Automotive Data Solutions Inc. © 2024 SU1-RR-DS-(HRR-SU1)-EN maestro.idatalink.com...
Page 159 Type Location Reverse B281 35 pin Brown/Yellow BIU, right of steering column (alternate location) Reverse Brown/Yellow Driver kick panel B281 B281 19 18 17 16 15 14 13 12 11 10 9 Automotive Data Solutions Inc. © 2024 SU1-RR-DS-(HRR-SU1)-EN maestro.idatalink.com...
Page 160 Wire Color on Adapter Kenwood Radio Wire Description E-Brake LtGreen LtGreen Reverse Light* Purple/White Purple/White Steering Wheel Controls (DATA) Blue/Yellow * Reverse light wire: Only connect to radio or module damage will occur. Automotive Data Solutions Inc. © 2024 SU1-RR-DS-(HRR-SU1)-EN maestro.idatalink.com...
Page 161 Flash module using Weblink Desktop and log in. Do NOT use DEMO MODE. • 2 RED ﬂashes Problem detected. Consult troubleshooting table. • 1 GREEN ﬂash After radio boots up : Normal operation. • Normal operation (inactive). Automotive Data Solutions Inc. © 2024 SU1-RR-DS-(HRR-SU1)-EN maestro.idatalink.com...
Page 162 The light on the Maestro is blinking RED TWICE and the radio IS turning on. Ensure the 4-pin data cable is connected between the radio and the RR, and that it is plugged into the black port on the Maestro RR. The red and blue ports on the RR should be empty.
Page 163 PRODUCTS REQUIRED PROGRAMMED FIRMWARE: SU1-RR-DS iDatalink Maestro RR Radio Replacement Interface iDatalink Maestro HRR-SU1 Installation Harness NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners.
Page 164 Subaru WrX STI WIThouT NaV 2008-2014 WELCOME ADDITIONAL INFORMATION AND ACCESSORIES Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are HEAD UNIT ADAPTER: now a few simple steps away from ACC-HU-PIO1, SON1, KEN1, KEN2, ALP1 enjoying your new car radio with enhanced features.
Page 165 If using head unit adapter (sold separately), connect HRR- STEP 6 SU1 harness to adapter and skip to step 2. • Connect all the harnesses to the Maestro RR module then test your installation. • Unbox the aftermarket radio and locate its main harness.
Page 166 BLUE WHITE GREEN STEP 4 OBDII CONNECTOR BLACK STEP 6 AMP TURN ON AMP TURN ON HRR-SU1 T-HARNESS NOT REQUIRED SUB IN SUB IN STEERING WHEEL CONTROL CABLE BACKUP CAM BACKUP CAM Automotive Data Solutions Inc. © 2024 SU1-RR-DS-(HRR-SU1)-EN maestro.idatalink.com...
Page 167 Wire Color Polarity Description Name Color Type Location Reverse 12 pin Brown/Yellow Passenger kick panel (alternate location) Reverse Brown/Yellow Passenger kick panel (harness to rear) 7 6 5 4 12 11 10 Automotive Data Solutions Inc. © 2024 SU1-RR-DS-(HRR-SU1)-EN maestro.idatalink.com...
Page 168 Wire Color on Adapter Kenwood Radio Wire Description E-Brake LtGreen LtGreen Reverse Light* Purple/White Purple/White Steering Wheel Controls (DATA) Blue/Yellow * Reverse light wire: Only connect to radio or module damage will occur. Automotive Data Solutions Inc. © 2024 SU1-RR-DS-(HRR-SU1)-EN maestro.idatalink.com...
Page 169 Flash module using Weblink Desktop and log in. Do NOT use DEMO MODE. • 2 RED ﬂashes Problem detected. Consult troubleshooting table. • 1 GREEN ﬂash After radio boots up : Normal operation. • Normal operation (inactive). Automotive Data Solutions Inc. © 2024 SU1-RR-DS-(HRR-SU1)-EN maestro.idatalink.com...
Page 170 The light on the Maestro is blinking RED TWICE and the radio IS turning on. Ensure the 4-pin data cable is connected between the radio and the RR, and that it is plugged into the black port on the Maestro RR. The red and blue ports on the RR should be empty.
Page 171 PRODUCTS REQUIRED PROGRAMMED FIRMWARE: SU1-RR-DS iDatalink Maestro RR Radio Replacement Interface iDatalink Maestro HRR-SU1 Installation Harness NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners.
Page 172 Subaru WrX Without NaV 2008-2014 WELCOME ADDITIONAL INFORMATION AND ACCESSORIES Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are HEAD UNIT ADAPTER: now a few simple steps away from ACC-HU-PIO1, SON1, KEN1, KEN2, ALP1 enjoying your new car radio with enhanced features.
Page 173 If using head unit adapter (sold separately), connect HRR- STEP 6 SU1 harness to adapter and skip to step 2. • Connect all the harnesses to the Maestro RR module then test your installation. • Unbox the aftermarket radio and locate its main harness.
Page 174 BLUE WHITE GREEN STEP 4 OBDII CONNECTOR BLACK STEP 6 AMP TURN ON AMP TURN ON HRR-SU1 T-HARNESS NOT REQUIRED SUB IN SUB IN STEERING WHEEL CONTROL CABLE BACKUP CAM BACKUP CAM Automotive Data Solutions Inc. © 2024 SU1-RR-DS-(HRR-SU1)-EN maestro.idatalink.com...
Page 175 Wire Color Polarity Description Name Color Type Location Reverse 12 pin Brown/Yellow Passenger kick panel (alternate location) Reverse Brown/Yellow Passenger kick panel (harness to rear) 7 6 5 4 12 11 10 Automotive Data Solutions Inc. © 2024 SU1-RR-DS-(HRR-SU1)-EN maestro.idatalink.com...
Page 176 Wire Color on Adapter Kenwood Radio Wire Description E-Brake LtGreen LtGreen Reverse Light* Purple/White Purple/White Steering Wheel Controls (DATA) Blue/Yellow * Reverse light wire: Only connect to radio or module damage will occur. Automotive Data Solutions Inc. © 2024 SU1-RR-DS-(HRR-SU1)-EN maestro.idatalink.com...
Page 177 Flash module using Weblink Desktop and log in. Do NOT use DEMO MODE. • 2 RED ﬂashes Problem detected. Consult troubleshooting table. • 1 GREEN ﬂash After radio boots up : Normal operation. • Normal operation (inactive). Automotive Data Solutions Inc. © 2024 SU1-RR-DS-(HRR-SU1)-EN maestro.idatalink.com...
Page 178 The light on the Maestro is blinking RED TWICE and the radio IS turning on. Ensure the 4-pin data cable is connected between the radio and the RR, and that it is plugged into the black port on the Maestro RR. The red and blue ports on the RR should be empty.
Page 179 Print only the pages for your vehicle using the advanced options in the Print menu. Install your Maestro RR according to the guide for your vehicle. WARNING Pressing the printer icon or “quick printing” this document will print all of the guides in this compilation.
Page 180 PRODUCTS REQUIRED PROGRAMMED FIRMWARE: SU2-RR-AS iDatalink Maestro RR Radio Replacement Interface iDatalink Maestro HRR-SU1 Installation Harness NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners.
Page 181 Subaru CroSStrek without NaV 2013-2014 WELCOME ADDITIONAL INFORMATION AND ACCESSORIES Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are HEAD UNIT ADAPTER: now a few simple steps away from ACC-HU-PIO1, SON1, KEN1, KEN2, ALP1 enjoying your new car radio with enhanced features.
Page 182 (Kenwood/JVC or radios with SWI/KEY wires) or the 3.5mm to the steering control input of the radio (see Radio Wire Reference Chart for more details). STEP 5 • Connect all the harnesses to the Maestro RR module then test your installation. Automotive Data Solutions Inc. © 2024 SU2-RR-AS-(HRR-SU1)-EN...
Page 183 WIRES FROM STEERING WHEEL VEHICLE CONTROL CABLE STEP 3 OBDII CONNECTOR BLACK WHITE STEP 5 AMP TURN ON AMP TURN ON HRR-SU1 T-HARNESS NOT REQUIRED DATA CABLE AUDIO CABLE SUB IN SUB IN Automotive Data Solutions Inc. © 2024 SU2-RR-AS-(HRR-SU1)-EN maestro.idatalink.com...
Page 184 Wire Description Refer to camera/ Green/Red E-Brake LtGreen LtGreen radio manual Refer to camera/ Reverse Light* Purple/White Purple/White Green/White radio manual Steering Wheel Controls (DATA) Blue/Yellow Blue/Yellow Steering Wheel Controls (DATA) Blue/Yellow Blue/Yellow Automotive Data Solutions Inc. © 2024 SU2-RR-AS-(HRR-SU1)-EN maestro.idatalink.com...
Page 185 LED fashes 1 or more times, either red or green, when a steering wheel button is pressed : normal operation. • 1 RED ﬂash Module has no frmware. Flash module using Weblink Desktop and log in. Do NOT use DEMO MODE. • Normal operation (inactive). Automotive Data Solutions Inc. © 2024 SU2-RR-AS-(HRR-SU1)-EN maestro.idatalink.com...
Page 186 If installing a modular radio and it is not turning on, ensure the screen is secured and any trim pieces on the radio have been installed fully. MAESTRO RR RESET PROCEDURE: Turn the key to the OFF position, then disconnect all connectors from the module.
Page 187 PRODUCTS REQUIRED PROGRAMMED FIRMWARE: SU2-RR-AS iDatalink Maestro RR Radio Replacement Interface iDatalink Maestro HRR-SU1 Installation Harness NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners.
Page 188 Subaru ForeSter with harman Kardon 2014-2015 WELCOME ADDITIONAL INFORMATION AND ACCESSORIES Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are HEAD UNIT ADAPTER: now a few simple steps away from ACC-HU-PIO1, SON1, KEN1, KEN2, ALP1 enjoying your new car radio with enhanced features.
Page 189 INSTALLATION INSTRUCTIONS P1 /1 STEP 5 STEP 1 • Connect all the harnesses to the Maestro RR module then Remove the factory radio test your installation. If using head unit adapter (sold separately), connect HRR- SU1 harness to adapter and skip to step 2.
Page 190 CONTROL CABLE WHITE WIRES FROM VEHICLE STEP 3 OBDII CONNECTOR BLACK STEP 5 BLUE AMP TURN ON AMP TURN ON HRR-SU1 T-HARNESS NOT REQUIRED DATA CABLE AUDIO SUB IN SUB IN CABLE Automotive Data Solutions Inc. © 2024 SU2-RR-AS-(HRR-SU1)-EN maestro.idatalink.com...
Page 191 Wire Description Refer to camera/ Green/Red E-Brake LtGreen LtGreen radio manual Refer to camera/ Reverse Light* Purple/White Purple/White Green/White radio manual Steering Wheel Controls (DATA) Blue/Yellow Blue/Yellow Steering Wheel Controls (DATA) Blue/Yellow Blue/Yellow Automotive Data Solutions Inc. © 2024 SU2-RR-AS-(HRR-SU1)-EN maestro.idatalink.com...
Page 192 LED fashes 1 or more times, either red or green, when a steering wheel button is pressed : normal operation. • 1 RED ﬂash Module has no frmware. Flash module using Weblink Desktop and log in. Do NOT use DEMO MODE. • Normal operation (inactive). Automotive Data Solutions Inc. © 2024 SU2-RR-AS-(HRR-SU1)-EN maestro.idatalink.com...
Page 193 If installing a modular radio and it is not turning on, ensure the screen is secured and any trim pieces on the radio have been installed fully. MAESTRO RR RESET PROCEDURE: Turn the key to the OFF position, then disconnect all connectors from the module.
Page 194 PRODUCTS REQUIRED PROGRAMMED FIRMWARE: SU2-RR-AS iDatalink Maestro RR Radio Replacement Interface iDatalink Maestro HRR-SU1 Installation Harness NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners.
Page 195 Subaru ForeSter without NaV 2014-2015 WELCOME ADDITIONAL INFORMATION AND ACCESSORIES Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are HEAD UNIT ADAPTER: now a few simple steps away from ACC-HU-PIO1, SON1, KEN1, KEN2, ALP1 enjoying your new car radio with enhanced features.
Page 196 (Kenwood/JVC or radios with SWI/KEY wires) or the 3.5mm to the steering control input of the radio (see Radio Wire Reference Chart for more details). STEP 5 • Connect all the harnesses to the Maestro RR module then test your installation. Automotive Data Solutions Inc. © 2024 SU2-RR-AS-(HRR-SU1)-EN...
Page 197 CONTROL CABLE STEP 3 OBDII CONNECTOR BLACK BLUE WHITE STEP 5 AMP TURN ON AMP TURN ON HRR-SU1 T-HARNESS NOT REQUIRED SUB IN SUB IN DATA CABLE AUDIO CABLE BACKUP CAM BACKUP CAM Automotive Data Solutions Inc. © 2024 SU2-RR-AS-(HRR-SU1)-EN maestro.idatalink.com...
Page 198 Wire Description Refer to camera/ Green/Red E-Brake LtGreen LtGreen radio manual Refer to camera/ Reverse Light* Purple/White Purple/White Green/White radio manual Steering Wheel Controls (DATA) Blue/Yellow Blue/Yellow Steering Wheel Controls (DATA) Blue/Yellow Blue/Yellow Automotive Data Solutions Inc. © 2024 SU2-RR-AS-(HRR-SU1)-EN maestro.idatalink.com...
Page 199 LED fashes 1 or more times, either red or green, when a steering wheel button is pressed : normal operation. • 1 RED ﬂash Module has no frmware. Flash module using Weblink Desktop and log in. Do NOT use DEMO MODE. • Normal operation (inactive). Automotive Data Solutions Inc. © 2024 SU2-RR-AS-(HRR-SU1)-EN maestro.idatalink.com...
Page 200 If installing a modular radio and it is not turning on, ensure the screen is secured and any trim pieces on the radio have been installed fully. MAESTRO RR RESET PROCEDURE: Turn the key to the OFF position, then disconnect all connectors from the module.
Page 201 PRODUCTS REQUIRED PROGRAMMED FIRMWARE: SU2-RR-AS iDatalink Maestro RR Radio Replacement Interface iDatalink Maestro HRR-SU1 Installation Harness NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners.
Page 202 Subaru Impreza baSe 2012-2014 WELCOME ADDITIONAL INFORMATION AND ACCESSORIES Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are HEAD UNIT ADAPTER: now a few simple steps away from ACC-HU-PIO1, SON1, KEN1, KEN2, ALP1 enjoying your new car radio with enhanced features.
Page 203 (Kenwood/JVC or radios with SWI/KEY wires) or the 3.5mm to the steering control input of the radio (see Radio Wire Reference Chart for more details). STEP 5 • Connect all the harnesses to the Maestro RR module then test your installation. Automotive Data Solutions Inc. © 2024 SU2-RR-AS-(HRR-SU1)-EN...
Page 204 WIRES FROM STEERING WHEEL VEHICLE CONTROL CABLE STEP 3 OBDII CONNECTOR BLACK WHITE STEP 5 AMP TURN ON AMP TURN ON HRR-SU1 T-HARNESS NOT REQUIRED DATA CABLE AUDIO CABLE SUB IN SUB IN Automotive Data Solutions Inc. © 2024 SU2-RR-AS-(HRR-SU1)-EN maestro.idatalink.com...
Page 205 Wire Description Refer to camera/ Green/Red E-Brake LtGreen LtGreen radio manual Refer to camera/ Reverse Light* Purple/White Purple/White Green/White radio manual Steering Wheel Controls (DATA) Blue/Yellow Blue/Yellow Steering Wheel Controls (DATA) Blue/Yellow Blue/Yellow Automotive Data Solutions Inc. © 2024 SU2-RR-AS-(HRR-SU1)-EN maestro.idatalink.com...
Page 206 LED fashes 1 or more times, either red or green, when a steering wheel button is pressed : normal operation. • 1 RED ﬂash Module has no frmware. Flash module using Weblink Desktop and log in. Do NOT use DEMO MODE. • Normal operation (inactive). Automotive Data Solutions Inc. © 2024 SU2-RR-AS-(HRR-SU1)-EN maestro.idatalink.com...
Page 207 If installing a modular radio and it is not turning on, ensure the screen is secured and any trim pieces on the radio have been installed fully. MAESTRO RR RESET PROCEDURE: Turn the key to the OFF position, then disconnect all connectors from the module.
Page 208 PRODUCTS REQUIRED PROGRAMMED FIRMWARE: SU2-RR-AS iDatalink Maestro RR Radio Replacement Interface iDatalink Maestro HRR-SU1 Installation Harness NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners.
Page 209 SUBARU WRX STI WITH BLUETOOTH 2015 WELCOME ADDITIONAL INFORMATION AND ACCESSORIES Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are HEAD UNIT ADAPTER: now a few simple steps away from ACC-HU-PIO1, SON1, KEN1, KEN2, ALP1 enjoying your new car radio with enhanced features.
Page 210 (Kenwood/JVC or radios with SWI/KEY wires) or the 3.5mm to the steering control input of the radio (see Radio Wire Reference Chart for more details). STEP 5 • Connect all the harnesses to the Maestro RR module then test your installation. Automotive Data Solutions Inc. © 2024 SU2-RR-AS-(HRR-SU1)-EN...
Page 211 CONTROL CABLE STEP 3 OBDII CONNECTOR BLACK BLUE WHITE STEP 5 AMP TURN ON AMP TURN ON HRR-SU1 T-HARNESS NOT REQUIRED SUB IN SUB IN DATA CABLE AUDIO CABLE BACKUP CAM BACKUP CAM Automotive Data Solutions Inc. © 2024 SU2-RR-AS-(HRR-SU1)-EN maestro.idatalink.com...
Page 212 Wire Description Refer to camera/ Green/Red E-Brake LtGreen LtGreen radio manual Refer to camera/ Reverse Light* Purple/White Purple/White Green/White radio manual Steering Wheel Controls (DATA) Blue/Yellow Blue/Yellow Steering Wheel Controls (DATA) Blue/Yellow Blue/Yellow Automotive Data Solutions Inc. © 2024 SU2-RR-AS-(HRR-SU1)-EN maestro.idatalink.com...
Page 213 LED fashes 1 or more times, either red or green, when a steering wheel button is pressed : normal operation. • 1 RED ﬂash Module has no frmware. Flash module using Weblink Desktop and log in. Do NOT use DEMO MODE. • Normal operation (inactive). Automotive Data Solutions Inc. © 2024 SU2-RR-AS-(HRR-SU1)-EN maestro.idatalink.com...
Page 214 If installing a modular radio and it is not turning on, ensure the screen is secured and any trim pieces on the radio have been installed fully. MAESTRO RR RESET PROCEDURE: Turn the key to the OFF position, then disconnect all connectors from the module.
Page 215 PRODUCTS REQUIRED PROGRAMMED FIRMWARE: SU2-RR-AS iDatalink Maestro RR Radio Replacement Interface iDatalink Maestro HRR-SU1 Installation Harness NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners.
Page 216 SUBARU WRX WITH BLUETOOTH 2015 WELCOME ADDITIONAL INFORMATION AND ACCESSORIES Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are HEAD UNIT ADAPTER: now a few simple steps away from ACC-HU-PIO1, SON1, KEN1, KEN2, ALP1 enjoying your new car radio with enhanced features.
Page 217 (Kenwood/JVC or radios with SWI/KEY wires) or the 3.5mm to the steering control input of the radio (see Radio Wire Reference Chart for more details). STEP 5 • Connect all the harnesses to the Maestro RR module then test your installation. Automotive Data Solutions Inc. © 2024 SU2-RR-AS-(HRR-SU1)-EN...
Page 218 CONTROL CABLE STEP 3 OBDII CONNECTOR BLACK BLUE WHITE STEP 5 AMP TURN ON AMP TURN ON HRR-SU1 T-HARNESS NOT REQUIRED SUB IN SUB IN DATA CABLE AUDIO CABLE BACKUP CAM BACKUP CAM Automotive Data Solutions Inc. © 2024 SU2-RR-AS-(HRR-SU1)-EN maestro.idatalink.com...
Page 219 Wire Description Refer to camera/ Green/Red E-Brake LtGreen LtGreen radio manual Refer to camera/ Reverse Light* Purple/White Purple/White Green/White radio manual Steering Wheel Controls (DATA) Blue/Yellow Blue/Yellow Steering Wheel Controls (DATA) Blue/Yellow Blue/Yellow Automotive Data Solutions Inc. © 2024 SU2-RR-AS-(HRR-SU1)-EN maestro.idatalink.com...
Page 220 LED fashes 1 or more times, either red or green, when a steering wheel button is pressed : normal operation. • 1 RED ﬂash Module has no frmware. Flash module using Weblink Desktop and log in. Do NOT use DEMO MODE. • Normal operation (inactive). Automotive Data Solutions Inc. © 2024 SU2-RR-AS-(HRR-SU1)-EN maestro.idatalink.com...
Page 221 If installing a modular radio and it is not turning on, ensure the screen is secured and any trim pieces on the radio have been installed fully. MAESTRO RR RESET PROCEDURE: Turn the key to the OFF position, then disconnect all connectors from the module.
Page 222 Print only the pages for your vehicle using the advanced options in the Print menu. Install your Maestro RR according to the guide for your vehicle. WARNING Pressing the printer icon or “quick printing” this document will print all of the guides in this compilation.
Page 223 PRODUCTS REQUIRED PROGRAMMED FIRMWARE: SU2-RR-DS iDatalink Maestro RR Radio Replacement Interface iDatalink Maestro HRR-SU1 Installation Harness NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners.
Page 224 Subaru CroSStrek without NaV 2013-2014 WELCOME ADDITIONAL INFORMATION AND ACCESSORIES Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are HEAD UNIT ADAPTER: now a few simple steps away from ACC-HU-PIO1, SON1, KEN1, KEN2, ALP1 enjoying your new car radio with enhanced features.
Page 225 INSTALLATION INSTRUCTIONS P1 /1 STEP 5 STEP 1 • Connect all the harnesses to the Maestro RR module then Remove the factory radio test your installation. If using head unit adapter (sold separately), connect HRR- SU1 harness to adapter and skip to step 2.
Page 226 CABLE WIRES FROM VEHICLE DATA CABLE STEP 3 OBDII CONNECTOR BLACK WHITE STEP 5 AMP TURN ON AMP TURN ON HRR-SU1 T-HARNESS NOT REQUIRED DATA CABLE AUDIO CABLE SUB IN SUB IN Automotive Data Solutions Inc. © 2024 SU2-RR-DS-(HRR-SU1)-EN maestro.idatalink.com...
Page 227 Wire Color on Adapter Kenwood Radio Wire Description E-Brake LtGreen LtGreen Reverse Light* Purple/White Purple/White Steering Wheel Controls (DATA) Blue/Yellow * Reverse light wire: Only connect to radio or module damage will occur. Automotive Data Solutions Inc. © 2024 SU2-RR-DS-(HRR-SU1)-EN maestro.idatalink.com...
Page 228 Flash module using Weblink Desktop and log in. Do NOT use DEMO MODE. • 2 RED ﬂashes Problem detected. Consult troubleshooting table. • 1 GREEN ﬂash After radio boots up : Normal operation. • Normal operation (inactive). Automotive Data Solutions Inc. © 2024 SU2-RR-DS-(HRR-SU1)-EN maestro.idatalink.com...
Page 229 The light on the Maestro is blinking RED TWICE and the radio IS turning on. Ensure the 4-pin data cable is connected between the radio and the RR, and that it is plugged into the black port on the Maestro RR. The red and blue ports on the RR should be empty.
Page 230 PRODUCTS REQUIRED PROGRAMMED FIRMWARE: SU2-RR-DS iDatalink Maestro RR Radio Replacement Interface iDatalink Maestro HRR-SU1 Installation Harness NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners.
Page 231 Subaru ForeSter with harman Kardon 2014-2015 WELCOME ADDITIONAL INFORMATION AND ACCESSORIES Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are HEAD UNIT ADAPTER: now a few simple steps away from ACC-HU-PIO1, SON1, KEN1, KEN2, ALP1 enjoying your new car radio with enhanced features.
Page 232 INSTALLATION INSTRUCTIONS P1 /1 STEP 5 STEP 1 • Connect all the harnesses to the Maestro RR module then Remove the factory radio test your installation. If using head unit adapter (sold separately), connect HRR- SU1 harness to adapter and skip to step 2.
Page 233 DATA CABLE WHITE WIRES FROM VEHICLE STEP 3 OBDII CONNECTOR BLACK STEP 5 BLUE AMP TURN ON AMP TURN ON HRR-SU1 T-HARNESS NOT REQUIRED DATA CABLE AUDIO SUB IN SUB IN CABLE Automotive Data Solutions Inc. © 2024 SU2-RR-DS-(HRR-SU1)-EN maestro.idatalink.com...
Page 234 Wire Color on Adapter Kenwood Radio Wire Description E-Brake LtGreen LtGreen Reverse Light* Purple/White Purple/White Steering Wheel Controls (DATA) Blue/Yellow * Reverse light wire: Only connect to radio or module damage will occur. Automotive Data Solutions Inc. © 2024 SU2-RR-DS-(HRR-SU1)-EN maestro.idatalink.com...
Page 235 Flash module using Weblink Desktop and log in. Do NOT use DEMO MODE. • 2 RED ﬂashes Problem detected. Consult troubleshooting table. • 1 GREEN ﬂash After radio boots up : Normal operation. • Normal operation (inactive). Automotive Data Solutions Inc. © 2024 SU2-RR-DS-(HRR-SU1)-EN maestro.idatalink.com...
Page 236 The light on the Maestro is blinking RED TWICE and the radio IS turning on. Ensure the 4-pin data cable is connected between the radio and the RR, and that it is plugged into the black port on the Maestro RR. The red and blue ports on the RR should be empty.
Page 237 PRODUCTS REQUIRED PROGRAMMED FIRMWARE: SU2-RR-DS iDatalink Maestro RR Radio Replacement Interface iDatalink Maestro HRR-SU1 Installation Harness NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners.
Page 238 Subaru ForeSter without NaV 2014-2015 WELCOME ADDITIONAL INFORMATION AND ACCESSORIES Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are HEAD UNIT ADAPTER: now a few simple steps away from ACC-HU-PIO1, SON1, KEN1, KEN2, ALP1 enjoying your new car radio with enhanced features.
Page 239 INSTALLATION INSTRUCTIONS P1 /1 STEP 5 STEP 1 • Connect all the harnesses to the Maestro RR module then Remove the factory radio test your installation. If using head unit adapter (sold separately), connect HRR- SU1 harness to adapter and skip to step 2.
Page 240 CABLE STEP 3 OBDII CONNECTOR BLACK BLUE WHITE STEP 5 AMP TURN ON AMP TURN ON HRR-SU1 T-HARNESS NOT REQUIRED SUB IN SUB IN DATA CABLE AUDIO CABLE BACKUP CAM BACKUP CAM Automotive Data Solutions Inc. © 2024 SU2-RR-DS-(HRR-SU1)-EN maestro.idatalink.com...
Page 241 Wire Color on Adapter Kenwood Radio Wire Description E-Brake LtGreen LtGreen Reverse Light* Purple/White Purple/White Steering Wheel Controls (DATA) Blue/Yellow * Reverse light wire: Only connect to radio or module damage will occur. Automotive Data Solutions Inc. © 2024 SU2-RR-DS-(HRR-SU1)-EN maestro.idatalink.com...
Page 242 Flash module using Weblink Desktop and log in. Do NOT use DEMO MODE. • 2 RED ﬂashes Problem detected. Consult troubleshooting table. • 1 GREEN ﬂash After radio boots up : Normal operation. • Normal operation (inactive). Automotive Data Solutions Inc. © 2024 SU2-RR-DS-(HRR-SU1)-EN maestro.idatalink.com...
Page 243 The light on the Maestro is blinking RED TWICE and the radio IS turning on. Ensure the 4-pin data cable is connected between the radio and the RR, and that it is plugged into the black port on the Maestro RR. The red and blue ports on the RR should be empty.
Page 244 PRODUCTS REQUIRED PROGRAMMED FIRMWARE: SU2-RR-DS iDatalink Maestro RR Radio Replacement Interface iDatalink Maestro HRR-SU1 Installation Harness NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners.
Page 245 Subaru Impreza baSe 2012-2014 WELCOME ADDITIONAL INFORMATION AND ACCESSORIES Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are HEAD UNIT ADAPTER: now a few simple steps away from ACC-HU-PIO1, SON1, KEN1, KEN2, ALP1 enjoying your new car radio with enhanced features.
Page 246 INSTALLATION INSTRUCTIONS P1 /1 STEP 5 STEP 1 • Connect all the harnesses to the Maestro RR module then Remove the factory radio test your installation. If using head unit adapter (sold separately), connect HRR- SU1 harness to adapter and skip to step 2.
Page 247 CABLE WIRES FROM VEHICLE DATA CABLE STEP 3 OBDII CONNECTOR BLACK WHITE STEP 5 AMP TURN ON AMP TURN ON HRR-SU1 T-HARNESS NOT REQUIRED DATA CABLE AUDIO CABLE SUB IN SUB IN Automotive Data Solutions Inc. © 2024 SU2-RR-DS-(HRR-SU1)-EN maestro.idatalink.com...
Page 248 Wire Color on Adapter Kenwood Radio Wire Description E-Brake LtGreen LtGreen Reverse Light* Purple/White Purple/White Steering Wheel Controls (DATA) Blue/Yellow * Reverse light wire: Only connect to radio or module damage will occur. Automotive Data Solutions Inc. © 2024 SU2-RR-DS-(HRR-SU1)-EN maestro.idatalink.com...
Page 249 Flash module using Weblink Desktop and log in. Do NOT use DEMO MODE. • 2 RED ﬂashes Problem detected. Consult troubleshooting table. • 1 GREEN ﬂash After radio boots up : Normal operation. • Normal operation (inactive). Automotive Data Solutions Inc. © 2024 SU2-RR-DS-(HRR-SU1)-EN maestro.idatalink.com...
Page 250 The light on the Maestro is blinking RED TWICE and the radio IS turning on. Ensure the 4-pin data cable is connected between the radio and the RR, and that it is plugged into the black port on the Maestro RR. The red and blue ports on the RR should be empty.
Page 251 PRODUCTS REQUIRED PROGRAMMED FIRMWARE: SU2-RR-DS iDatalink Maestro RR Radio Replacement Interface iDatalink Maestro HRR-SU1 Installation Harness NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners.
Page 252 SUBARU WRX STI WITH BLUETOOTH 2015 WELCOME ADDITIONAL INFORMATION AND ACCESSORIES Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are HEAD UNIT ADAPTER: now a few simple steps away from ACC-HU-PIO1, SON1, KEN1, KEN2, ALP1 enjoying your new car radio with enhanced features.
Page 253 • Plug the harnesses into the aftermarket radio. • Plug the Data cable to the data port of the aftermarket radio. • Insert the Audio cable into the iDatalink 3.5 mm audio jack of the aftermarket radio (If there is no iDatalink audio input, connect to AUX).
Page 254 CABLE STEP 3 OBDII CONNECTOR BLACK BLUE WHITE STEP 5 AMP TURN ON AMP TURN ON HRR-SU1 T-HARNESS NOT REQUIRED SUB IN SUB IN DATA CABLE AUDIO CABLE BACKUP CAM BACKUP CAM Automotive Data Solutions Inc. © 2024 SU2-RR-DS-(HRR-SU1)-EN maestro.idatalink.com...
Page 255 Wire Color on Adapter Kenwood Radio Wire Description E-Brake LtGreen LtGreen Reverse Light* Purple/White Purple/White Steering Wheel Controls (DATA) Blue/Yellow * Reverse light wire: Only connect to radio or module damage will occur. Automotive Data Solutions Inc. © 2024 SU2-RR-DS-(HRR-SU1)-EN maestro.idatalink.com...
Page 256 Flash module using Weblink Desktop and log in. Do NOT use DEMO MODE. • 2 RED ﬂashes Problem detected. Consult troubleshooting table. • 1 GREEN ﬂash After radio boots up : Normal operation. • Normal operation (inactive). Automotive Data Solutions Inc. © 2024 SU2-RR-DS-(HRR-SU1)-EN maestro.idatalink.com...
Page 257 The light on the Maestro is blinking RED TWICE and the radio IS turning on. Ensure the 4-pin data cable is connected between the radio and the RR, and that it is plugged into the black port on the Maestro RR. The red and blue ports on the RR should be empty.
Page 258 PRODUCTS REQUIRED PROGRAMMED FIRMWARE: SU2-RR-DS iDatalink Maestro RR Radio Replacement Interface iDatalink Maestro HRR-SU1 Installation Harness NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners.
Page 259 SUBARU WRX WITH BLUETOOTH 2015 WELCOME ADDITIONAL INFORMATION AND ACCESSORIES Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are HEAD UNIT ADAPTER: now a few simple steps away from ACC-HU-PIO1, SON1, KEN1, KEN2, ALP1 enjoying your new car radio with enhanced features.
Page 260 • Plug the harnesses into the aftermarket radio. • Plug the Data cable to the data port of the aftermarket radio. • Insert the Audio cable into the iDatalink 3.5 mm audio jack of the aftermarket radio (If there is no iDatalink audio input, connect to AUX).
Page 261 CABLE STEP 3 OBDII CONNECTOR BLACK BLUE WHITE STEP 5 AMP TURN ON AMP TURN ON HRR-SU1 T-HARNESS NOT REQUIRED SUB IN SUB IN DATA CABLE AUDIO CABLE BACKUP CAM BACKUP CAM Automotive Data Solutions Inc. © 2024 SU2-RR-DS-(HRR-SU1)-EN maestro.idatalink.com...
Page 262 Wire Color on Adapter Kenwood Radio Wire Description E-Brake LtGreen LtGreen Reverse Light* Purple/White Purple/White Steering Wheel Controls (DATA) Blue/Yellow * Reverse light wire: Only connect to radio or module damage will occur. Automotive Data Solutions Inc. © 2024 SU2-RR-DS-(HRR-SU1)-EN maestro.idatalink.com...
Page 263 Flash module using Weblink Desktop and log in. Do NOT use DEMO MODE. • 2 RED ﬂashes Problem detected. Consult troubleshooting table. • 1 GREEN ﬂash After radio boots up : Normal operation. • Normal operation (inactive). Automotive Data Solutions Inc. © 2024 SU2-RR-DS-(HRR-SU1)-EN maestro.idatalink.com...
Page 264 The light on the Maestro is blinking RED TWICE and the radio IS turning on. Ensure the 4-pin data cable is connected between the radio and the RR, and that it is plugged into the black port on the Maestro RR. The red and blue ports on the RR should be empty.

iDataLink MAESTRO Rr Install Manual

Quick Links

Need help?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for iDataLink MAESTRO Rr

Summary of Contents for iDataLink MAESTRO Rr