iDataLink Maestro RR Install Manual
  1. Manuals
  2. Brands
  3. iDataLink Manuals
  4. Automobile Electronics
  5. Maestro RR
  6. Install manual
iDataLink Maestro RR Install Manual

iDataLink Maestro RR Install Manual

2020-2022 ford transit 1500 2500 3500 with 4" or 8" radio (floating screen)
Hide thumbs Also See for Maestro RR:
Table of Contents

Advertisement

Quick Links

Download this manual
SELECT VEHICLE
PRINT PAGES NEEDED
HOW TO USE THIS INSTALL GUIDE
1
Open the Bookmarks menu and find your vehicle OR scroll
down until you find the install guide for your vehicle.
2
Print only the pages for your vehicle using the advanced
options in the Print menu.
3
Install your Maestro RR according to the guide for your vehicle.
Pressing the printer icon or "quick printing" this document will print
NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certifi ed technician. Logos and trademarks used here in
are the properties of their respective owners.
WARNING
all of the guides in this compilation.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Maestro RR and is the answer not in the manual?

Questions and answers

Related Manuals for iDataLink Maestro RR

Summary of Contents for iDataLink Maestro RR

  • Page 1 Print only the pages for your vehicle using the advanced options in the Print menu. Install your Maestro RR according to the guide for your vehicle. WARNING Pressing the printer icon or “quick printing” this document will print all of the guides in this compilation.

  • Page 2: Install Guide

    PRODUCTS REQUIRED PROGRAMMED FIRMWARE: FO2C-RR-DS iDatalink Maestro RR or RR2 Radio Replacement Interface iDatalink Maestro TRA1 Dash Kit NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners.

  • Page 3: Need Help

    Ford TransiT 1500 2500 3500 WiTh 4" or 8" radio (FloaTing screen) 2020-2022 WELCOME ADDITIONAL INFORMATION AND ACCESSORIES Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are HEAD UNIT ADAPTER: now a few simple steps away from ACC-HU-PIO1, SON1, KEN1, KEN2, ALP1 enjoying your new car radio with enhanced features.

  • Page 4: Installation Instructions

    (4) Phillips screws provided with TRA1. (Fig. 2.2) 9. Slide the radio control module into the radio brackets and secure it with the hardware provided with the radio. (Fig. Fig. 2.1 Fig. 2.2 2.3) Fig. 2.3 Automotive Data Solutions Inc. © 2023 FO2C-RR-DS-(HRR-TRA1)-EN maestro.idatalink.com...

  • Page 5: Make Connections

    2. • Plug in USB cables • Plug the 4-pin Data cable to the data port (Idatalink I/F • If not using head unit adapter, locate the aftermarket port) of the aftermarket radio.
  • Page 6 4. Reinstall rear trim panel. (Fig. 3.4) 5. Follow manufacturer instructions for mounting screen to radio body and test functionality. (Fig. 3.5) Fig. 3.3 Fig. 3.4 6. Reinstall glovebox compartment ( if applicable). Fig. 3.5 Automotive Data Solutions Inc. © 2023 FO2C-RR-DS-(HRR-TRA1)-EN maestro.idatalink.com...

  • Page 7: Wiring Diagram

    WIRES FROM VEHICLE WITHOUT SYNC STEP 3 SYNC HARNESS MIC 1 MIC 1 WITH SYNC STEP 4 MAESTRO RR MODULE OBDII HARNESS WITHOUT SYNC AMP TURNON AMP TURNON HRR-TRA1 T-HARNESS NOT REQUIRED STEERING WHEEL CONTROL CABLE Automotive Data Solutions Inc. © 2023 FO2C-RR-DS-(HRR-TRA1)-EN maestro.idatalink.com...

  • Page 8: Radio Wire Reference Chart

    Wire Color on Adapter Kenwood Radio Wire Description E-Brake LtGreen LtGreen Reverse Light* Purple/White Purple/White Steering Wheel Controls (DATA) Blue/Yellow * Reverse light wire: Only connect to radio or module damage will occur. Automotive Data Solutions Inc. © 2023 FO2C-RR-DS-(HRR-TRA1)-EN maestro.idatalink.com...

  • Page 9: Module Diagnostics

    Problem detected. Consult troubleshooting table. • 1 GREEN flash After radio boots up : Normal operation. • 3 GREEN flashes Bluetooth is activated. Turns off after one minute: Normal operation. • • Normal operation (inactive). Automotive Data Solutions Inc. © 2023 FO2C-RR-DS-(HRR-TRA1)-EN maestro.idatalink.com...

  • Page 10: Troubleshooting Table

    The light on the Maestro is blinking RED TWICE and the radio IS turning on. Ensure the 4-pin data cable is connected between the radio and the RR, and that it is plugged into the black port on the Maestro RR. The red and blue ports on the RR should be empty.
  • Page 11 PRODUCTS REQUIRED PROGRAMMED FIRMWARE: FO2C-RR-DS iDatalink Maestro RR or RR2 Radio Replacement Interface iDatalink Maestro TRA1 Dash Kit NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners.
  • Page 12 Ford TransiT 1500 2500 3500 WiTh 4" or 8" radio (Modular radio) 2020-2022 WELCOME ADDITIONAL INFORMATION AND ACCESSORIES Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are HEAD UNIT ADAPTER: now a few simple steps away from ACC-HU-PIO1, SON1, KEN1, KEN2, ALP1 enjoying your new car radio with enhanced features.
  • Page 13 6. Remove 2 (two) 7mm screws securing the radio control unit to dash and remove unit. Disconnect the main wiring harness and all of the antenna connections from the radio control unit. (Fig. 1.6) Fig. 1.5 Fig. 1.6 Automotive Data Solutions Inc. © 2023 FO2C-RR-DS-(HRR-TRA1)-EN maestro.idatalink.com...
  • Page 14 (Fig. 2.7) 14. Slide the radio control module into the radio brackets and Fig. 2.5 Fig. 2.6 secure it with the hardware provided with the radio. (Fig. 2.8) Fig. 2.7 Fig. 2.8 Automotive Data Solutions Inc. © 2023 FO2C-RR-DS-(HRR-TRA1)-EN maestro.idatalink.com...
  • Page 15 • Connect the backup cam cable into the aftermarket radio. • Connect the antenna adapter to the aftermarket radio. • Plug in USB cables • Plug the 4-pin Data cable to the data port (Idatalink I/F Fig. 3.3 Fig. 3.4 port) of the aftermarket radio.
  • Page 16 WIRES FROM VEHICLE WITHOUT SYNC STEP 3 SYNC HARNESS MIC 1 MIC 1 WITH SYNC STEP 4 MAESTRO RR MODULE OBDII HARNESS WITHOUT SYNC AMP TURNON AMP TURNON HRR-TRA1 T-HARNESS NOT REQUIRED STEERING WHEEL CONTROL CABLE Automotive Data Solutions Inc. © 2023 FO2C-RR-DS-(HRR-TRA1)-EN maestro.idatalink.com...
  • Page 17 Wire Color on Adapter Kenwood Radio Wire Description E-Brake LtGreen LtGreen Reverse Light* Purple/White Purple/White Steering Wheel Controls (DATA) Blue/Yellow * Reverse light wire: Only connect to radio or module damage will occur. Automotive Data Solutions Inc. © 2023 FO2C-RR-DS-(HRR-TRA1)-EN maestro.idatalink.com...
  • Page 18 Problem detected. Consult troubleshooting table. • 1 GREEN flash After radio boots up : Normal operation. • 3 GREEN flashes Bluetooth is activated. Turns off after one minute: Normal operation. • • Normal operation (inactive). Automotive Data Solutions Inc. © 2023 FO2C-RR-DS-(HRR-TRA1)-EN maestro.idatalink.com...
  • Page 19 The light on the Maestro is blinking RED TWICE and the radio IS turning on. Ensure the 4-pin data cable is connected between the radio and the RR, and that it is plugged into the black port on the Maestro RR. The red and blue ports on the RR should be empty.
  • Page 20 PRODUCTS REQUIRED PROGRAMMED FIRMWARE: FO2C-RR-DS iDatalink Maestro RR or RR2 Radio Replacement Interface iDatalink Maestro TRA1 Dash Kit NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners.
  • Page 21 Ford TransiT 1500 2500 3500 WiTh 4" radio (FloaTing screen) 2023 WELCOME ADDITIONAL INFORMATION AND ACCESSORIES Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are HEAD UNIT ADAPTER: now a few simple steps away from ACC-HU-PIO1, SON1, KEN1, KEN2, ALP1 enjoying your new car radio with enhanced features.
  • Page 22 (4) Phillips screws provided with TRA1. (Fig. 2.2) 9. Slide the radio control module into the radio brackets and secure it with the hardware provided with the radio. (Fig. Fig. 2.1 Fig. 2.2 2.3) Fig. 2.3 Automotive Data Solutions Inc. © 2023 FO2C-RR-DS-(HRR-TRA1)-EN maestro.idatalink.com...
  • Page 23 2. • Plug in USB cables • Plug the 4-pin Data cable to the data port (Idatalink I/F • If not using head unit adapter, locate the aftermarket port) of the aftermarket radio.
  • Page 24 4. Reinstall rear trim panel. (Fig. 3.4) 5. Follow manufacturer instructions for mounting screen to radio body and test functionality. (Fig. 3.5) Fig. 3.3 Fig. 3.4 6. Reinstall glovebox compartment ( if applicable). Fig. 3.5 Automotive Data Solutions Inc. © 2023 FO2C-RR-DS-(HRR-TRA1)-EN maestro.idatalink.com...
  • Page 25 WIRES FROM VEHICLE WITHOUT SYNC STEP 3 SYNC HARNESS MIC 1 MIC 1 WITH SYNC STEP 4 MAESTRO RR MODULE OBDII HARNESS WITHOUT SYNC AMP TURNON AMP TURNON HRR-TRA1 T-HARNESS NOT REQUIRED STEERING WHEEL CONTROL CABLE Automotive Data Solutions Inc. © 2023 FO2C-RR-DS-(HRR-TRA1)-EN maestro.idatalink.com...
  • Page 26 Wire Color on Adapter Kenwood Radio Wire Description E-Brake LtGreen LtGreen Reverse Light* Purple/White Purple/White Steering Wheel Controls (DATA) Blue/Yellow * Reverse light wire: Only connect to radio or module damage will occur. Automotive Data Solutions Inc. © 2023 FO2C-RR-DS-(HRR-TRA1)-EN maestro.idatalink.com...
  • Page 27 Problem detected. Consult troubleshooting table. • 1 GREEN flash After radio boots up : Normal operation. • 3 GREEN flashes Bluetooth is activated. Turns off after one minute: Normal operation. • • Normal operation (inactive). Automotive Data Solutions Inc. © 2023 FO2C-RR-DS-(HRR-TRA1)-EN maestro.idatalink.com...
  • Page 28 The light on the Maestro is blinking RED TWICE and the radio IS turning on. Ensure the 4-pin data cable is connected between the radio and the RR, and that it is plugged into the black port on the Maestro RR. The red and blue ports on the RR should be empty.
  • Page 29 PRODUCTS REQUIRED PROGRAMMED FIRMWARE: FO2C-RR-DS iDatalink Maestro RR or RR2 Radio Replacement Interface iDatalink Maestro TRA1 Dash Kit NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners.
  • Page 30 Ford TransiT 1500 2500 3500 WiTh 4" radio (Modular radio) 2023 WELCOME ADDITIONAL INFORMATION AND ACCESSORIES Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are HEAD UNIT ADAPTER: now a few simple steps away from ACC-HU-PIO1, SON1, KEN1, KEN2, ALP1 enjoying your new car radio with enhanced features.
  • Page 31 6. Remove 2 (two) 7mm screws securing the radio control unit to dash and remove unit. Disconnect the main wiring harness and all of the antenna connections from the radio control unit. (Fig. 1.6) Fig. 1.5 Fig. 1.6 Automotive Data Solutions Inc. © 2023 FO2C-RR-DS-(HRR-TRA1)-EN maestro.idatalink.com...
  • Page 32 (Fig. 2.7) 14. Slide the radio control module into the radio brackets and Fig. 2.5 Fig. 2.6 secure it with the hardware provided with the radio. (Fig. 2.8) Fig. 2.7 Fig. 2.8 Automotive Data Solutions Inc. © 2023 FO2C-RR-DS-(HRR-TRA1)-EN maestro.idatalink.com...
  • Page 33 • Connect the backup cam cable into the aftermarket radio. • Connect the antenna adapter to the aftermarket radio. • Plug in USB cables • Plug the 4-pin Data cable to the data port (Idatalink I/F Fig. 3.3 Fig. 3.4 port) of the aftermarket radio.
  • Page 34 WIRES FROM VEHICLE WITHOUT SYNC STEP 3 SYNC HARNESS MIC 1 MIC 1 WITH SYNC STEP 4 MAESTRO RR MODULE OBDII HARNESS WITHOUT SYNC AMP TURNON AMP TURNON HRR-TRA1 T-HARNESS NOT REQUIRED STEERING WHEEL CONTROL CABLE Automotive Data Solutions Inc. © 2023 FO2C-RR-DS-(HRR-TRA1)-EN maestro.idatalink.com...
  • Page 35 Wire Color on Adapter Kenwood Radio Wire Description E-Brake LtGreen LtGreen Reverse Light* Purple/White Purple/White Steering Wheel Controls (DATA) Blue/Yellow * Reverse light wire: Only connect to radio or module damage will occur. Automotive Data Solutions Inc. © 2023 FO2C-RR-DS-(HRR-TRA1)-EN maestro.idatalink.com...
  • Page 36 Problem detected. Consult troubleshooting table. • 1 GREEN flash After radio boots up : Normal operation. • 3 GREEN flashes Bluetooth is activated. Turns off after one minute: Normal operation. • • Normal operation (inactive). Automotive Data Solutions Inc. © 2023 FO2C-RR-DS-(HRR-TRA1)-EN maestro.idatalink.com...
  • Page 37 The light on the Maestro is blinking RED TWICE and the radio IS turning on. Ensure the 4-pin data cable is connected between the radio and the RR, and that it is plugged into the black port on the Maestro RR. The red and blue ports on the RR should be empty.

This manual is also suitable for:

Maestro rr2

Table of Contents