iDataLink Maestro RR Install Manual
  1. Manuals
  2. Brands
  3. iDataLink Manuals
  4. Automobile Accessories
  5. Maestro RR
  6. Install manual

iDataLink Maestro RR Install Manual

Volkswagen arteon without amplifier 2019-2023
Hide thumbs Also See for Maestro RR:

Advertisement

Table of Contents

SELECT VEHICLE
PRINT PAGES NEEDED
HOW TO USE THIS INSTALL GUIDE
1
Open the Bookmarks menu and find your vehicle OR scroll
down until you find the install guide for your vehicle.
2
Print only the pages for your vehicle using the advanced
options in the Print menu.
3
Install your Maestro RR according to the guide for your vehicle.
Pressing the printer icon or "quick printing" this document will print
NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certifi ed technician. Logos and trademarks used here in
are the properties of their respective owners.
WARNING
all of the guides in this compilation.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Maestro RR and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for iDataLink Maestro RR

Summary of Contents for iDataLink Maestro RR

  • Page 1 Print only the pages for your vehicle using the advanced options in the Print menu. Install your Maestro RR according to the guide for your vehicle. WARNING Pressing the printer icon or “quick printing” this document will print all of the guides in this compilation.

  • Page 2: Install Guide

    PRODUCTS REQUIRED PROGRAMMED FIRMWARE: VW2-RR-DS iDatalink Maestro RR or RR2 Radio Replacement Interface iDatalink Maestro HRN-RR-VW2 Installation Harness NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners.

  • Page 3: Need Help

    Volkswagen arteon without amplifier 2019-2023 WELCOME ADDITIONAL INFORMATION AND ACCESSORIES Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are HEAD UNIT ADAPTER: now a few simple steps away from ACC-HU-PIO1, SON1, KEN1, KEN2, ALP1 enjoying your new car radio with enhanced features.

  • Page 4: Installation Instructions

    • Plug the backup camera cable. • Plug the Data cable to the data port of the aftermarket radio. • Insert the Audio cable into the iDatalink 3.5 mm audio jack of the aftermarket radio (If there is no iDatalink audio input, connect to AUX).

  • Page 5: Wiring Diagram

    AUDIO CABLE WIRES FROM VEHICLE WHITE STEP 3 OBDII CONNECTOR BLACK STEP 5 WHITE N.C. N.C. MAESTRO RR MODULE AMP TURNON AMP TURNON N.C. HRR-VW2 T-HARNESS NOT REQUIRED STEERING WHEEL CONTROL CABLE Automotive Data Solutions Inc. © 2023 VW2-RR-DS-(HRR-VW2)-EN maestro.idatalink.com...

  • Page 6: Radio Wire Reference Chart

    Wire Color on Adapter Kenwood Radio Wire Description E-Brake LtGreen LtGreen Reverse Light* Purple/White Purple/White Steering Wheel Controls (DATA) Blue/Yellow * Reverse light wire: Only connect to radio or module damage will occur. Automotive Data Solutions Inc. © 2023 VW2-RR-DS-(HRR-VW2)-EN maestro.idatalink.com...

  • Page 7: Module Diagnostics

    Problem detected. Consult troubleshooting table. • 1 GREEN flash After radio boots up : Normal operation. • 3 GREEN flashes Bluetooth is activated. Turns off after one minute: Normal operation. • • Normal operation (inactive). Automotive Data Solutions Inc. © 2023 VW2-RR-DS-(HRR-VW2)-EN maestro.idatalink.com...

  • Page 8: Troubleshooting Table

    Ensure the 4-pin data cable is connected between the radio and the RR, and RED TWICE that it is plugged into the black port on the Maestro RR. The red and blue ports on the RR should be empty. Make sure the correct radio model and serial number were entered during the fl ash.
  • Page 9 PRODUCTS REQUIRED PROGRAMMED FIRMWARE: VW2-RR-DS iDatalink Maestro RR or RR2 Radio Replacement Interface iDatalink Maestro HRN-RR-VW2 Installation Harness NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners.
  • Page 10 Volkswagen atlas Cross sport without amplifier 2021-2023 WELCOME ADDITIONAL INFORMATION AND ACCESSORIES Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are HEAD UNIT ADAPTER: now a few simple steps away from ACC-HU-PIO1, SON1, KEN1, KEN2, ALP1 enjoying your new car radio with enhanced features.
  • Page 11 • Plug the backup camera cable. • Plug the Data cable to the data port of the aftermarket radio. • Insert the Audio cable into the iDatalink 3.5 mm audio jack of the aftermarket radio (If there is no iDatalink audio input, connect to AUX).
  • Page 12 AUDIO CABLE WIRES FROM VEHICLE WHITE STEP 3 OBDII CONNECTOR BLACK STEP 5 WHITE N.C. N.C. MAESTRO RR MODULE AMP TURNON AMP TURNON N.C. HRR-VW2 T-HARNESS NOT REQUIRED STEERING WHEEL CONTROL CABLE Automotive Data Solutions Inc. © 2023 VW2-RR-DS-(HRR-VW2)-EN maestro.idatalink.com...
  • Page 13 Wire Color on Adapter Kenwood Radio Wire Description E-Brake LtGreen LtGreen Reverse Light* Purple/White Purple/White Steering Wheel Controls (DATA) Blue/Yellow * Reverse light wire: Only connect to radio or module damage will occur. Automotive Data Solutions Inc. © 2023 VW2-RR-DS-(HRR-VW2)-EN maestro.idatalink.com...
  • Page 14 Problem detected. Consult troubleshooting table. • 1 GREEN flash After radio boots up : Normal operation. • 3 GREEN flashes Bluetooth is activated. Turns off after one minute: Normal operation. • • Normal operation (inactive). Automotive Data Solutions Inc. © 2023 VW2-RR-DS-(HRR-VW2)-EN maestro.idatalink.com...
  • Page 15 Ensure the 4-pin data cable is connected between the radio and the RR, and RED TWICE that it is plugged into the black port on the Maestro RR. The red and blue ports on the RR should be empty. Make sure the correct radio model and serial number were entered during the fl ash.
  • Page 16 PRODUCTS REQUIRED PROGRAMMED FIRMWARE: VW2-RR-DS iDatalink Maestro RR or RR2 Radio Replacement Interface iDatalink Maestro HRN-RR-VW2 Installation Harness NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners.
  • Page 17 Volkswagen atlas without amplifier 2018-2023 WELCOME ADDITIONAL INFORMATION AND ACCESSORIES Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are HEAD UNIT ADAPTER: now a few simple steps away from ACC-HU-PIO1, SON1, KEN1, KEN2, ALP1 enjoying your new car radio with enhanced features.
  • Page 18 • Plug the backup camera cable. • Plug the Data cable to the data port of the aftermarket radio. • Insert the Audio cable into the iDatalink 3.5 mm audio jack of the aftermarket radio (If there is no iDatalink audio input, connect to AUX).
  • Page 19 AUDIO CABLE WIRES FROM VEHICLE WHITE STEP 3 OBDII CONNECTOR BLACK STEP 5 WHITE N.C. N.C. MAESTRO RR MODULE AMP TURNON AMP TURNON N.C. HRR-VW2 T-HARNESS NOT REQUIRED STEERING WHEEL CONTROL CABLE Automotive Data Solutions Inc. © 2023 VW2-RR-DS-(HRR-VW2)-EN maestro.idatalink.com...
  • Page 20 Wire Color on Adapter Kenwood Radio Wire Description E-Brake LtGreen LtGreen Reverse Light* Purple/White Purple/White Steering Wheel Controls (DATA) Blue/Yellow * Reverse light wire: Only connect to radio or module damage will occur. Automotive Data Solutions Inc. © 2023 VW2-RR-DS-(HRR-VW2)-EN maestro.idatalink.com...
  • Page 21 Problem detected. Consult troubleshooting table. • 1 GREEN flash After radio boots up : Normal operation. • 3 GREEN flashes Bluetooth is activated. Turns off after one minute: Normal operation. • • Normal operation (inactive). Automotive Data Solutions Inc. © 2023 VW2-RR-DS-(HRR-VW2)-EN maestro.idatalink.com...
  • Page 22 Ensure the 4-pin data cable is connected between the radio and the RR, and RED TWICE that it is plugged into the black port on the Maestro RR. The red and blue ports on the RR should be empty. Make sure the correct radio model and serial number were entered during the fl ash.
  • Page 23 PRODUCTS REQUIRED PROGRAMMED FIRMWARE: VW2-RR-DS iDatalink Maestro RR or RR2 Radio Replacement Interface iDatalink Maestro HRN-RR-VW2 Installation Harness NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners.
  • Page 24 Volkswagen golf alltrack without amplifier 2017-2019 WELCOME ADDITIONAL INFORMATION AND ACCESSORIES Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are HEAD UNIT ADAPTER: now a few simple steps away from ACC-HU-PIO1, SON1, KEN1, KEN2, ALP1 enjoying your new car radio with enhanced features.
  • Page 25 • Plug the backup camera cable. • Plug the Data cable to the data port of the aftermarket radio. • Insert the Audio cable into the iDatalink 3.5 mm audio jack of the aftermarket radio (If there is no iDatalink audio input, connect to AUX).
  • Page 26 AUDIO CABLE WIRES FROM VEHICLE WHITE STEP 3 OBDII CONNECTOR BLACK STEP 5 WHITE N.C. N.C. MAESTRO RR MODULE AMP TURNON AMP TURNON N.C. HRR-VW2 T-HARNESS NOT REQUIRED STEERING WHEEL CONTROL CABLE Automotive Data Solutions Inc. © 2023 VW2-RR-DS-(HRR-VW2)-EN maestro.idatalink.com...
  • Page 27 Wire Color on Adapter Kenwood Radio Wire Description E-Brake LtGreen LtGreen Reverse Light* Purple/White Purple/White Steering Wheel Controls (DATA) Blue/Yellow * Reverse light wire: Only connect to radio or module damage will occur. Automotive Data Solutions Inc. © 2023 VW2-RR-DS-(HRR-VW2)-EN maestro.idatalink.com...
  • Page 28 Problem detected. Consult troubleshooting table. • 1 GREEN flash After radio boots up : Normal operation. • 3 GREEN flashes Bluetooth is activated. Turns off after one minute: Normal operation. • • Normal operation (inactive). Automotive Data Solutions Inc. © 2023 VW2-RR-DS-(HRR-VW2)-EN maestro.idatalink.com...
  • Page 29 Ensure the 4-pin data cable is connected between the radio and the RR, and RED TWICE that it is plugged into the black port on the Maestro RR. The red and blue ports on the RR should be empty. Make sure the correct radio model and serial number were entered during the fl ash.
  • Page 30 PRODUCTS REQUIRED PROGRAMMED FIRMWARE: VW2-RR-DS iDatalink Maestro RR or RR2 Radio Replacement Interface iDatalink Maestro HRN-RR-VW2 Installation Harness NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners.
  • Page 31 Volkswagen golf gTI wIThouT amplIfIer 2015-2021 WELCOME ADDITIONAL INFORMATION AND ACCESSORIES Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are HEAD UNIT ADAPTER: now a few simple steps away from ACC-HU-PIO1, SON1, KEN1, KEN2, ALP1 enjoying your new car radio with enhanced features.
  • Page 32 • Plug the backup camera cable. • Plug the Data cable to the data port of the aftermarket radio. • Insert the Audio cable into the iDatalink 3.5 mm audio jack of the aftermarket radio (If there is no iDatalink audio input, connect to AUX).
  • Page 33 AUDIO CABLE WIRES FROM VEHICLE WHITE STEP 3 OBDII CONNECTOR BLACK STEP 5 WHITE N.C. N.C. MAESTRO RR MODULE AMP TURNON AMP TURNON N.C. HRR-VW2 T-HARNESS NOT REQUIRED STEERING WHEEL CONTROL CABLE Automotive Data Solutions Inc. © 2023 VW2-RR-DS-(HRR-VW2)-EN maestro.idatalink.com...
  • Page 34 Wire Color on Adapter Kenwood Radio Wire Description E-Brake LtGreen LtGreen Reverse Light* Purple/White Purple/White Steering Wheel Controls (DATA) Blue/Yellow * Reverse light wire: Only connect to radio or module damage will occur. Automotive Data Solutions Inc. © 2023 VW2-RR-DS-(HRR-VW2)-EN maestro.idatalink.com...
  • Page 35 Problem detected. Consult troubleshooting table. • 1 GREEN flash After radio boots up : Normal operation. • 3 GREEN flashes Bluetooth is activated. Turns off after one minute: Normal operation. • • Normal operation (inactive). Automotive Data Solutions Inc. © 2023 VW2-RR-DS-(HRR-VW2)-EN maestro.idatalink.com...
  • Page 36 Ensure the 4-pin data cable is connected between the radio and the RR, and RED TWICE that it is plugged into the black port on the Maestro RR. The red and blue ports on the RR should be empty. Make sure the correct radio model and serial number were entered during the fl ash.
  • Page 37 PRODUCTS REQUIRED PROGRAMMED FIRMWARE: VW2-RR-DS iDatalink Maestro RR or RR2 Radio Replacement Interface iDatalink Maestro HRN-RR-VW2 Installation Harness NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners.
  • Page 38 Volkswagen golf R without amplifieR 2015-2021 WELCOME ADDITIONAL INFORMATION AND ACCESSORIES Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are HEAD UNIT ADAPTER: now a few simple steps away from ACC-HU-PIO1, SON1, KEN1, KEN2, ALP1 enjoying your new car radio with enhanced features.
  • Page 39 • Plug the backup camera cable. • Plug the Data cable to the data port of the aftermarket radio. • Insert the Audio cable into the iDatalink 3.5 mm audio jack of the aftermarket radio (If there is no iDatalink audio input, connect to AUX).
  • Page 40 AUDIO CABLE WIRES FROM VEHICLE WHITE STEP 3 OBDII CONNECTOR BLACK STEP 5 WHITE N.C. N.C. MAESTRO RR MODULE AMP TURNON AMP TURNON N.C. HRR-VW2 T-HARNESS NOT REQUIRED STEERING WHEEL CONTROL CABLE Automotive Data Solutions Inc. © 2023 VW2-RR-DS-(HRR-VW2)-EN maestro.idatalink.com...
  • Page 41 Wire Color on Adapter Kenwood Radio Wire Description E-Brake LtGreen LtGreen Reverse Light* Purple/White Purple/White Steering Wheel Controls (DATA) Blue/Yellow * Reverse light wire: Only connect to radio or module damage will occur. Automotive Data Solutions Inc. © 2023 VW2-RR-DS-(HRR-VW2)-EN maestro.idatalink.com...
  • Page 42 Problem detected. Consult troubleshooting table. • 1 GREEN flash After radio boots up : Normal operation. • 3 GREEN flashes Bluetooth is activated. Turns off after one minute: Normal operation. • • Normal operation (inactive). Automotive Data Solutions Inc. © 2023 VW2-RR-DS-(HRR-VW2)-EN maestro.idatalink.com...
  • Page 43 Ensure the 4-pin data cable is connected between the radio and the RR, and RED TWICE that it is plugged into the black port on the Maestro RR. The red and blue ports on the RR should be empty. Make sure the correct radio model and serial number were entered during the fl ash.
  • Page 44 PRODUCTS REQUIRED PROGRAMMED FIRMWARE: VW2-RR-DS iDatalink Maestro RR or RR2 Radio Replacement Interface iDatalink Maestro HRN-RR-VW2 Installation Harness NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners.
  • Page 45 Volkswagen golf sportwagen without amplifier 2015-2019 WELCOME ADDITIONAL INFORMATION AND ACCESSORIES Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are HEAD UNIT ADAPTER: now a few simple steps away from ACC-HU-PIO1, SON1, KEN1, KEN2, ALP1 enjoying your new car radio with enhanced features.
  • Page 46 • Plug the backup camera cable. • Plug the Data cable to the data port of the aftermarket radio. • Insert the Audio cable into the iDatalink 3.5 mm audio jack of the aftermarket radio (If there is no iDatalink audio input, connect to AUX).
  • Page 47 AUDIO CABLE WIRES FROM VEHICLE WHITE STEP 3 OBDII CONNECTOR BLACK STEP 5 WHITE N.C. N.C. MAESTRO RR MODULE AMP TURNON AMP TURNON N.C. HRR-VW2 T-HARNESS NOT REQUIRED STEERING WHEEL CONTROL CABLE Automotive Data Solutions Inc. © 2023 VW2-RR-DS-(HRR-VW2)-EN maestro.idatalink.com...
  • Page 48 Wire Color on Adapter Kenwood Radio Wire Description E-Brake LtGreen LtGreen Reverse Light* Purple/White Purple/White Steering Wheel Controls (DATA) Blue/Yellow * Reverse light wire: Only connect to radio or module damage will occur. Automotive Data Solutions Inc. © 2023 VW2-RR-DS-(HRR-VW2)-EN maestro.idatalink.com...
  • Page 49 Problem detected. Consult troubleshooting table. • 1 GREEN flash After radio boots up : Normal operation. • 3 GREEN flashes Bluetooth is activated. Turns off after one minute: Normal operation. • • Normal operation (inactive). Automotive Data Solutions Inc. © 2023 VW2-RR-DS-(HRR-VW2)-EN maestro.idatalink.com...
  • Page 50 Ensure the 4-pin data cable is connected between the radio and the RR, and RED TWICE that it is plugged into the black port on the Maestro RR. The red and blue ports on the RR should be empty. Make sure the correct radio model and serial number were entered during the fl ash.
  • Page 51 PRODUCTS REQUIRED PROGRAMMED FIRMWARE: VW2-RR-DS iDatalink Maestro RR or RR2 Radio Replacement Interface iDatalink Maestro HRN-RR-VW2 Installation Harness NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners.
  • Page 52 Volkswagen golf without amplifier 2015-2021 WELCOME ADDITIONAL INFORMATION AND ACCESSORIES Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are HEAD UNIT ADAPTER: now a few simple steps away from ACC-HU-PIO1, SON1, KEN1, KEN2, ALP1 enjoying your new car radio with enhanced features.
  • Page 53 • Plug the backup camera cable. • Plug the Data cable to the data port of the aftermarket radio. • Insert the Audio cable into the iDatalink 3.5 mm audio jack of the aftermarket radio (If there is no iDatalink audio input, connect to AUX).
  • Page 54 AUDIO CABLE WIRES FROM VEHICLE WHITE STEP 3 OBDII CONNECTOR BLACK STEP 5 WHITE N.C. N.C. MAESTRO RR MODULE AMP TURNON AMP TURNON N.C. HRR-VW2 T-HARNESS NOT REQUIRED STEERING WHEEL CONTROL CABLE Automotive Data Solutions Inc. © 2023 VW2-RR-DS-(HRR-VW2)-EN maestro.idatalink.com...
  • Page 55 Wire Color on Adapter Kenwood Radio Wire Description E-Brake LtGreen LtGreen Reverse Light* Purple/White Purple/White Steering Wheel Controls (DATA) Blue/Yellow * Reverse light wire: Only connect to radio or module damage will occur. Automotive Data Solutions Inc. © 2023 VW2-RR-DS-(HRR-VW2)-EN maestro.idatalink.com...
  • Page 56 Problem detected. Consult troubleshooting table. • 1 GREEN flash After radio boots up : Normal operation. • 3 GREEN flashes Bluetooth is activated. Turns off after one minute: Normal operation. • • Normal operation (inactive). Automotive Data Solutions Inc. © 2023 VW2-RR-DS-(HRR-VW2)-EN maestro.idatalink.com...
  • Page 57 Ensure the 4-pin data cable is connected between the radio and the RR, and RED TWICE that it is plugged into the black port on the Maestro RR. The red and blue ports on the RR should be empty. Make sure the correct radio model and serial number were entered during the fl ash.
  • Page 58 PRODUCTS REQUIRED PROGRAMMED FIRMWARE: VW2-RR-DS iDatalink Maestro RR or RR2 Radio Replacement Interface iDatalink Maestro HRN-RR-VW2 Installation Harness NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners.
  • Page 59 Volkswagen Jetta glI wIthout amplIfIer 2019-2023 WELCOME ADDITIONAL INFORMATION AND ACCESSORIES Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are HEAD UNIT ADAPTER: now a few simple steps away from ACC-HU-PIO1, SON1, KEN1, KEN2, ALP1 enjoying your new car radio with enhanced features.
  • Page 60 • Plug the backup camera cable. • Plug the Data cable to the data port of the aftermarket radio. • Insert the Audio cable into the iDatalink 3.5 mm audio jack of the aftermarket radio (If there is no iDatalink audio input, connect to AUX).
  • Page 61 AUDIO CABLE WIRES FROM VEHICLE WHITE STEP 3 OBDII CONNECTOR BLACK STEP 5 WHITE N.C. N.C. MAESTRO RR MODULE AMP TURNON AMP TURNON N.C. HRR-VW2 T-HARNESS NOT REQUIRED STEERING WHEEL CONTROL CABLE Automotive Data Solutions Inc. © 2023 VW2-RR-DS-(HRR-VW2)-EN maestro.idatalink.com...
  • Page 62 Wire Color on Adapter Kenwood Radio Wire Description E-Brake LtGreen LtGreen Reverse Light* Purple/White Purple/White Steering Wheel Controls (DATA) Blue/Yellow * Reverse light wire: Only connect to radio or module damage will occur. Automotive Data Solutions Inc. © 2023 VW2-RR-DS-(HRR-VW2)-EN maestro.idatalink.com...
  • Page 63 Problem detected. Consult troubleshooting table. • 1 GREEN flash After radio boots up : Normal operation. • 3 GREEN flashes Bluetooth is activated. Turns off after one minute: Normal operation. • • Normal operation (inactive). Automotive Data Solutions Inc. © 2023 VW2-RR-DS-(HRR-VW2)-EN maestro.idatalink.com...
  • Page 64 Ensure the 4-pin data cable is connected between the radio and the RR, and RED TWICE that it is plugged into the black port on the Maestro RR. The red and blue ports on the RR should be empty. Make sure the correct radio model and serial number were entered during the fl ash.
  • Page 65 PRODUCTS REQUIRED PROGRAMMED FIRMWARE: VW2-RR-DS iDatalink Maestro RR or RR2 Radio Replacement Interface iDatalink Maestro HRN-RR-VW2 Installation Harness NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners.
  • Page 66 Volkswagen Jetta with Beats audio 2019-2020 WELCOME ADDITIONAL INFORMATION AND ACCESSORIES Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are HEAD UNIT ADAPTER: now a few simple steps away from ACC-HU-PIO1, SON1, KEN1, KEN2, ALP1 enjoying your new car radio with enhanced features.
  • Page 67 • Plug the backup camera cable. • Plug the Data cable to the data port of the aftermarket radio. • Insert the Audio cable into the iDatalink 3.5 mm audio jack of the aftermarket radio (If there is no iDatalink audio input, connect to AUX).
  • Page 68 AUDIO CABLE WIRES FROM VEHICLE WHITE STEP 3 OBDII CONNECTOR BLACK STEP 5 WHITE N.C. N.C. MAESTRO RR MODULE AMP TURNON AMP TURNON N.C. HRR-VW2 T-HARNESS NOT REQUIRED STEERING WHEEL CONTROL CABLE Automotive Data Solutions Inc. © 2023 VW2-RR-DS-(HRR-VW2)-EN maestro.idatalink.com...
  • Page 69 Wire Color on Adapter Kenwood Radio Wire Description E-Brake LtGreen LtGreen Reverse Light* Purple/White Purple/White Steering Wheel Controls (DATA) Blue/Yellow * Reverse light wire: Only connect to radio or module damage will occur. Automotive Data Solutions Inc. © 2023 VW2-RR-DS-(HRR-VW2)-EN maestro.idatalink.com...
  • Page 70 Problem detected. Consult troubleshooting table. • 1 GREEN flash After radio boots up : Normal operation. • 3 GREEN flashes Bluetooth is activated. Turns off after one minute: Normal operation. • • Normal operation (inactive). Automotive Data Solutions Inc. © 2023 VW2-RR-DS-(HRR-VW2)-EN maestro.idatalink.com...
  • Page 71 Ensure the 4-pin data cable is connected between the radio and the RR, and RED TWICE that it is plugged into the black port on the Maestro RR. The red and blue ports on the RR should be empty. Make sure the correct radio model and serial number were entered during the fl ash.
  • Page 72 PRODUCTS REQUIRED PROGRAMMED FIRMWARE: VW2-RR-DS iDatalink Maestro RR or RR2 Radio Replacement Interface iDatalink Maestro HRN-RR-VW2 Installation Harness NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners.
  • Page 73 Volkswagen Jetta without amplifier 2019-2023 WELCOME ADDITIONAL INFORMATION AND ACCESSORIES Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are HEAD UNIT ADAPTER: now a few simple steps away from ACC-HU-PIO1, SON1, KEN1, KEN2, ALP1 enjoying your new car radio with enhanced features.
  • Page 74 • Plug the backup camera cable. • Plug the Data cable to the data port of the aftermarket radio. • Insert the Audio cable into the iDatalink 3.5 mm audio jack of the aftermarket radio (If there is no iDatalink audio input, connect to AUX).
  • Page 75 AUDIO CABLE WIRES FROM VEHICLE WHITE STEP 3 OBDII CONNECTOR BLACK STEP 5 WHITE N.C. N.C. MAESTRO RR MODULE AMP TURNON AMP TURNON N.C. HRR-VW2 T-HARNESS NOT REQUIRED STEERING WHEEL CONTROL CABLE Automotive Data Solutions Inc. © 2023 VW2-RR-DS-(HRR-VW2)-EN maestro.idatalink.com...
  • Page 76 Wire Color on Adapter Kenwood Radio Wire Description E-Brake LtGreen LtGreen Reverse Light* Purple/White Purple/White Steering Wheel Controls (DATA) Blue/Yellow * Reverse light wire: Only connect to radio or module damage will occur. Automotive Data Solutions Inc. © 2023 VW2-RR-DS-(HRR-VW2)-EN maestro.idatalink.com...
  • Page 77 Problem detected. Consult troubleshooting table. • 1 GREEN flash After radio boots up : Normal operation. • 3 GREEN flashes Bluetooth is activated. Turns off after one minute: Normal operation. • • Normal operation (inactive). Automotive Data Solutions Inc. © 2023 VW2-RR-DS-(HRR-VW2)-EN maestro.idatalink.com...
  • Page 78 Ensure the 4-pin data cable is connected between the radio and the RR, and RED TWICE that it is plugged into the black port on the Maestro RR. The red and blue ports on the RR should be empty. Make sure the correct radio model and serial number were entered during the fl ash.
  • Page 79 PRODUCTS REQUIRED PROGRAMMED FIRMWARE: VW2-RR-DS iDatalink Maestro RR or RR2 Radio Replacement Interface iDatalink Maestro HRN-RR-VW2 Installation Harness NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners.
  • Page 80 Volkswagen Taos wiThouT amplifier 2022-2023 WELCOME ADDITIONAL INFORMATION AND ACCESSORIES Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are HEAD UNIT ADAPTER: now a few simple steps away from ACC-HU-PIO1, SON1, KEN1, KEN2, ALP1 enjoying your new car radio with enhanced features.
  • Page 81 • Plug the backup camera cable. • Plug the Data cable to the data port of the aftermarket radio. • Insert the Audio cable into the iDatalink 3.5 mm audio jack of the aftermarket radio (If there is no iDatalink audio input, connect to AUX).
  • Page 82 AUDIO CABLE WIRES FROM VEHICLE WHITE STEP 3 OBDII CONNECTOR BLACK STEP 5 WHITE N.C. N.C. MAESTRO RR MODULE AMP TURNON AMP TURNON N.C. HRR-VW2 T-HARNESS NOT REQUIRED STEERING WHEEL CONTROL CABLE Automotive Data Solutions Inc. © 2023 VW2-RR-DS-(HRR-VW2)-EN maestro.idatalink.com...
  • Page 83 Wire Color on Adapter Kenwood Radio Wire Description E-Brake LtGreen LtGreen Reverse Light* Purple/White Purple/White Steering Wheel Controls (DATA) Blue/Yellow * Reverse light wire: Only connect to radio or module damage will occur. Automotive Data Solutions Inc. © 2023 VW2-RR-DS-(HRR-VW2)-EN maestro.idatalink.com...
  • Page 84 Problem detected. Consult troubleshooting table. • 1 GREEN flash After radio boots up : Normal operation. • 3 GREEN flashes Bluetooth is activated. Turns off after one minute: Normal operation. • • Normal operation (inactive). Automotive Data Solutions Inc. © 2023 VW2-RR-DS-(HRR-VW2)-EN maestro.idatalink.com...
  • Page 85 Ensure the 4-pin data cable is connected between the radio and the RR, and RED TWICE that it is plugged into the black port on the Maestro RR. The red and blue ports on the RR should be empty. Make sure the correct radio model and serial number were entered during the fl ash.
  • Page 86 PRODUCTS REQUIRED PROGRAMMED FIRMWARE: VW2-RR-DS iDatalink Maestro RR or RR2 Radio Replacement Interface iDatalink Maestro HRN-RR-VW2 Installation Harness NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners.
  • Page 87 Volkswagen Tiguan wiThouT amplifier 2018-2023 WELCOME ADDITIONAL INFORMATION AND ACCESSORIES Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are HEAD UNIT ADAPTER: now a few simple steps away from ACC-HU-PIO1, SON1, KEN1, KEN2, ALP1 enjoying your new car radio with enhanced features.
  • Page 88 • Plug the backup camera cable. • Plug the Data cable to the data port of the aftermarket radio. • Insert the Audio cable into the iDatalink 3.5 mm audio jack of the aftermarket radio (If there is no iDatalink audio input, connect to AUX).
  • Page 89 AUDIO CABLE WIRES FROM VEHICLE WHITE STEP 3 OBDII CONNECTOR BLACK STEP 5 WHITE N.C. N.C. MAESTRO RR MODULE AMP TURNON AMP TURNON N.C. HRR-VW2 T-HARNESS NOT REQUIRED STEERING WHEEL CONTROL CABLE Automotive Data Solutions Inc. © 2023 VW2-RR-DS-(HRR-VW2)-EN maestro.idatalink.com...
  • Page 90 Wire Color on Adapter Kenwood Radio Wire Description E-Brake LtGreen LtGreen Reverse Light* Purple/White Purple/White Steering Wheel Controls (DATA) Blue/Yellow * Reverse light wire: Only connect to radio or module damage will occur. Automotive Data Solutions Inc. © 2023 VW2-RR-DS-(HRR-VW2)-EN maestro.idatalink.com...
  • Page 91 Problem detected. Consult troubleshooting table. • 1 GREEN flash After radio boots up : Normal operation. • 3 GREEN flashes Bluetooth is activated. Turns off after one minute: Normal operation. • • Normal operation (inactive). Automotive Data Solutions Inc. © 2023 VW2-RR-DS-(HRR-VW2)-EN maestro.idatalink.com...
  • Page 92 Ensure the 4-pin data cable is connected between the radio and the RR, and RED TWICE that it is plugged into the black port on the Maestro RR. The red and blue ports on the RR should be empty. Make sure the correct radio model and serial number were entered during the fl ash.

This manual is also suitable for:

Maestro rr2Maestro hrn-rr-vw2

Table of Contents