Using The Blender - Breville BBL300 Series Manual

Operating Your Breville Power Blender
Assembling and attaching the
blender jug
1. Place the motor base on a flat, dry surface such as
a bench top. Ensure the speed selection dial is in the
off '0' position, the appliance is switched off at the
power outlet and the power cord is unplugged.
2. Place the blender jug upside down on a flat, dry
surface such as a bench top.
3. Hold the blender jug handle and place the silicon seal
onto the narrow end of the blender jug then carefully
insert the blade assembly.
4. Place the blender jug base over the blade assembly
and turn clockwise to secure into position.
5. Turn the assembled blender jug upright and place
onto the motor base.
6. Insert the inner measuring cup into the lid, then
insert the lid firmly into the top of the blender jug.
NOTE
Ensure lid is placed onto blender jug firmly and the
inner measuring cup is in position before operating
the blender. Do not operate blender without the lid.
Additional ingredients can be added whilst blending
by removing the inner measuring cup and placing
or pouring ingredients through the middle opening
in the lid.
NOTE
Liquids should be placed into the blender jug before
solid ingredients, unless specified differently in a
recipe.
NOTE
All foods should be cut into cubes (approx. 2-3cm
square) to achieve an even result.
NEVER PLACE ANYTHING OTHER THAN FOOD AND LIQUIDS IN THE BLENDER WHILST THE MOTOR
IS RUNNING.
8
continued

Using the blender

NOTE
When using the blender for the first time, you may
notice an odour coming from the motor. This is
normal and will dissipate with use.
1. Ensure the speed selection dial is in the off '0'
position. Insert the power cord into a 230/240V
power outlet and switch on at the power outlet.
2. Remove the lid and add food and/or liquid into the
blender jug.
3. Select the desired speed by turning the speed
selection dial clockwise to a speed between 1 (low)
and 5 (high). The speed can be changed at any time
during the blending process. Turn the speed selection
dial anti-clockwise to select the ICE (Pulse) setting.
Speed 1-2 (low speed) is suitable for savoury dips and
thin batters.
Speed 3-4 (medium speed) is suitable for sauces and
drinks.
Speed 5 (high speed) is suitable for smoothies and
cocktails.
ICE (Pulse) can be used for foods that require short
bursts of power to process such as herbs, nuts, small
vegetables and ice. When using the ICE (Pulse) function,
hold the blender lid in place.
NOTE
If any moisture or liquid appears on the motor base,
ensure the speed selection dial is in the off '0'
position, the appliance is switched off at the power
outlet and the power cord is unplugged, remove the
blender jug then wipe the spillage immediately with
paper towel and dry thoroughly. Ensure the blender
jug is correctly assembled before placing back onto
the motor body and operating.