Advertisement
features
1
Stopper
Removable stopper allows you to add ingredients whilst continuing to blend
2
Jug lid
3
1.75L glass jug (1.5L working capacity)
4
4-point blade with jug bottom
5
Speed control
Speed control dial with five speeds plus pulse
6
Base unit
1
2
3
4
5
6
Due to our policy of continuous improvement, the actual product may differ slightly from the one illustrated in these instructions.
4
VBL242_20EM2 (UK).indd 4-5
VBL242_20EM2 (UK).indd 4-5
Make sure the unit is switched off and unplugged from the mains supply socket
before assembly.
Make sure that the speed control is set to the off (0) position before plugging your
blender in to the mains supply.
Never place your fingers inside the jug during operation or when adding
ingredients.
1. Place the jug onto the base by lining up the recesses on the jug with the lugs on the
base. Make sure that the jug is seated squarely and securely on the base.
2. Add the ingredients to the blending jug. Don't overfill the jug.
3. Fit the lid onto the jug. Turn the lid clockwise until the spout cover on the lid aligns
with the spout on the jug.
4. Fit the stopper. Push the stopper down until securly fitted in position.
5. During processing, further ingredients can be added by twisting and removing the
stopper in the lid. Refit the stopper after adding any ingredients.
Blending
Do not operate your blender continuously for more than three minutes without
giving it a rest period of one minute.
Place one hand on top of the lid to steady your blender during processing.
To start blending, set the speed control from 1 to 5 based on your desired result.
Alternatively, blend food using the pulse setting. Turn the dial to the pulse setting to blend
in short bursts.
During blending the stopper can be removed to feed ingredients into the jug.
using your blender
5
9/28/20 09:32
9/28/20 09:32
Advertisement
