Care, Cleaning And Storage - Breville BBL300 Series Manual

Care, Cleaning and Storage

Care and cleaning
Before cleaning, ensure the speed selection dial is in the
off '0' position, the appliance is switched off at the power
outlet and the power cord is unplugged from the power
outlet.
Cleaning the blender jug, lid, inner
measuring cup, silicon seal, blender
jug base and blade assembly
Wash blender jug, lid, inner measuring cup, silicon seal,
blender jug base and blade assembly in warm soapy
water with a soft cloth. Use a kitchen bottle brush to
dislodge stubborn food. Rinse and dry thoroughly. Do not
place the lid, inner measuring cup, silicon seal, blender
jug or blade assembly into a dishwasher.
NOTE
The blender jug can be washed on a normal cycle in
a dishwasher. Remove the lid, inner lid, silicon seal,
blender jug base and blade assembly before placing
the blender jug upside down in the dishwasher for
better stability.
Cleaning the motor base
Wipe the motor base with a soft, damp cloth then dry
thoroughly. Wipe any excess food particles from the
power cord.
NOTE
Do not use abrasive scouring pads or cleaners
when cleaning the motor base as they may
scratch the surface.
NOTE
Do not expose the glass jug to sudden temperature
change.
THE BLENDING BLADES ARE EXTREMELY SHARP. AVOID ANY CONTACT WITH FINGERS AND HANDS.
USE CAUTION WHEN HANDLING AND STORING.
10
Removing stubborn or strong food
stains and odours
Strong smelling foods such as garlic and fish may leave
an odour and some vegetables such as carrots may
leave a stain on the blender jug and lid. To remove, soak
blender jug and lid for 5 minutes in warm soapy water.
Then wash with a mild detergent and warm water, rinse
well and dry thoroughly.
Storage
Store the blender upright with the blender jug, silicon
seal, blade assembly, blender jug base, lid and inner
measuring cup assembled and inserted on the motor
base or beside it. Do not place anything on top.