Auto Clean; Assembling And Attaching The Blender; Before First Use - Breville the Hemisphere Control Instruction Book

AUTO CLEAN

Use to remove most of the ingredients off the
blender walls and blades. Add 2 cups warm
soapy water, and press the clean button.
For harder to clean, sticky or thick ingredients,
add ½ teaspoon of dish liquid detergent for
extra cleaning power. For best results, clean the
blender jug this way immediately after use.
NOTE
If the blender is running and a different button
is pressed, the speed will automatically switch
to that program without stopping.

BEFORE FIRST USE

Before using your Breville Hemisphere™
Control Blender for the first time, remove any
packaging material and promotional labels.
Wash the lid, inner lid, blender jug (refer to
"Care & Cleaning) in warm, soapy water
with a soft cloth. Rinse and dry thoroughly.
Do not place parts in the dishwasher (with the
exception of the blender jug).
The blender jug may be washed in the
dishwasher. Ensure the lid has been removed
from the blender jug before placing into the
dishwasher. The motor base can be wiped with
a damp cloth. Dry thoroughly.
NOTE
The blending blades are extremely sharp.
Avoid any contact with fingers and hands.
10
ASSEMBLING AND ATTACHING
THE BLENDER
Step 1
Place the motor base on a flat, dry surface such
as a counter-top. Ensure that the motor base
is turned off at the ON | OFF button and the
power cord is unplugged.
Step 2
With the blender jug in the upright position
place it on the motor base. The handle of the
blender can be positioned to the left or right
hand side of the appliance.
Step 3
Add food or liquid into the blender jug
ensuring not to exceed the 'MAX' mark.
Place the blender lid firmly into position on
the top of the blender jug. Insert the clear inner
measuring lid into the blender lid and turn
clockwise to lock into position.