Disassembling Your Blender For Cleaning, Care And Storage - Breville BBL600 Instructions And Recipes Manual

BR8376 BBL600 Book AMEND DEC_06.qxp 22/12/06
Operating your Breville Ikon
Step 10.
For ingredients that require short bursts of power,
select the 'PULSE' function. The 'PULSE' button will
illuminate and remain illuminated while the button is
depressed. When this function is selected, the LCD
timer screen will illuminate and count upwards in one
second increments during pulsing. Press the 'PULSE'
button in short bursts until blending is complete.
Use the 'PULSE' button when the food that is
being processed is too thick or coarse to
circulate within the blender jug.
Note
10
10:53 AM Page 10
™ Blender
continued
Step 11.
At the end of use, always ensure the blender is
turned off by pressing the 'Power' button on the
control panel. Then switch the appliance off at the
power outlet and unplug the cord. Ensure the motor
and blades have completely stopped before
attempting to move the appliance, or when the
Breville Ikon™ Blender is not in use and before
disassembling, cleaning and storing.
• During the blending process, ingredients may
stick to the sides of the blender jug. To push the
food back onto the blades, press the 'Power'
button on the control panel and switch off at
the power outlet and remove the power cord.
Remove the lid and use a plastic spatula to
scrape down the sides of the jug. Replace the
lid before recommencing blending.
• If any moisture or liquid appears on top of the
motor base during blending, press the 'Power'
button on the control panel, switch off at the
power outlet and remove the power plug.
Remove the blender jug. Wipe the motor base
immediately with a dry cloth or paper towelling
to absorb the liquid. Check the blender jug is
correctly assembled.
• Never place anything other than food and
liquids in the Ikon™ blender whilst the motor
is running.
Note

Disassembling your blender for cleaning, care and storage

Step 1.
Always ensure the Breville Ikon™ Blender is off
by pressing the 'Power' button on the control panel.
Then switch off at the power outlet and unplug
the power cord.
Step 2.
Remove the blender jug from the motor base by
grasping the handle and lifting the jug in an
upward direction.
Step 3.
Remove the blade assembly by upturning the blender
jug and twisting the 1 / turn Blade Removal System
4
clockwise for 1 / of a turn to unlock (see Fig 1), then
4
lift upwards and away from the base of the blender
jug. The circular plastic surround attached to the
base of the blender jug is not removable.
Step 4.
Remove the silicon seal from the blade assembly.
The Breville Ikon™ Blender features a 1 / turn
4
Blade Removal System for the easy removal of
the blade for cleaning.
Note
Fig 1
11