SOLIS MULTI SLICER User Manual page 11

For safety reasons, the appliance starts as soon as the tamper
4
Place the chosen ingredients in the feed port 5.
4.
5. Place the tamper
D
By pressing the release button 2, you can remove the small tamper
4
process long and narrow ingredients (see image D).
Do not use the appliance for more than 30 minutes continuously. After 30 minutes
4
of continuous use, allow the appliance to cool down for at least 1 hour to prevent
the motor from overheating.
into the feed port
4
1
to cut the ingredients.
5
is inserted.
4
2
to
3
11