Systems Controls & Instruments ETN-24-PROG Series Owner's Manual page 3

ETN-24-PROG Series
Owner's Manual - Installation and Operating Instructions
Please read this manual carefully before installation and use
Index :
1. Options and accessories.
2. Installation Instructions
3. Wiring Connections
4. Hardware Jumpers Explanation
5. Operating Manual
6. Hand held remote control - Operating Manual - Option. (with weekly program build in)
7. Troubleshooting for technician.
1. Options and Accessories
1.1. Programmable or non-programmable, feature is ONLY available with the remote control.
Default from factory with weekly program.
1.2. Hand held remote control with weekly program and BackLite.
1.3. Individual cool and heat set points.
1.4. External sensor option .
FOR DETAILS ON WHERE TO PURCHASE ACCESSORIES, PLEASE CONTACT SCI FOR YOUR NEAREST LOCATION
OR VISIT OUR WEB SITE AT WWW.SCILLC.COM
2. Installation Instructions
Important: It is very easy to open and handle after assembly on wall!
File: ETN-24-PROG book - page letter
Separate the front panel from back panel by depressing the tongue located in the top
of the unit.
Rev: 1 - 1 -
Pipersville, PA 18947 USA
Phone: 215-766 1487 Fax: 215-766 1493
Email: info@scillc.com - www.scillc.com
Push the back panel out.
Date: 24-06-2002