Systems Controls & Instruments ETN-24-PROG Series Owner's Manual page 10

Normal display
In normal display, the display will show:
- Temperature in the room.
- ON or OFF.
- Day of the week.
- Real time clock .
- Actual program that the unit is doing.
- Mode.
- Fan mode.
•
The following chart will help you make your normal settings (Mode, Fan) and the program.
•
We recommend that you fill out the chart BEFORE setting the weekly program.
•
On the chart, select a cooling and a heating temperature. This will keep a safe differential between Heat and Cool
for auto change over.
•
The display will show the program (weekday, Saturday or Sunday)
•
During programming, the display will NOT return to normal display unless all the program is review.
To exit the Program mode, press ON button until normal display is reach.
•
The controller keeps a safe differential of at least 1 degree between Heat set and Cool set.
(Heat is always less than Cool).
File: ETN-24-PROG book - page letter Rev: 1 - 8 -
Pipersville, PA 18947 USA
Phone: 215-766 1487 Fax: 215-766 1493
Email: info@scillc.com - www.scillc.com
Date: 24-06-2002