Page 1
Classe 300EOS 344842 - 344845 User manual Home + Control Home + Security RA00215AC_U-12/24-PC www.bticino.com...
Page 2
Classe 300EOS User manual Home + Control Home + Security...
Page 3
Remote control of the Video door entry, Alarm and MyHOME functions Remote control of the Alarm system for secondary users Use through voice commands Use with Amazon Alexa® Introduction Associate the Classe 300EOS with Netatmo with an Alexa® account Settings Basic setup General Language...
Page 4
Classe 300EOS User manual Get control of the alarm Network Connection to the network using Ethernet technology Connection to the network using Wi-Fi technology Display Amazon Alexa® My App Help...
We would like to inform you that the service provided by BTicino by means of remote use via the App involves the use of data. The cost linked to data usage depends on the type of contract which the customer has with his ISP (Internet Service Provider) and is solely the customer’s responsibility.
Page 6
Classe 300EOS User manual Warnings and consumer rights Read carefully before use and keep for future reference. Touching the units with wet hands is forbidden. Using liquid cleaners or aerosols is forbidden. Blocking the ventilation openings is forbidden. Modifying the devices is forbidden.
Classe 300EOS User manual Front view LEDs and pushbuttons 5” vertical touch screen display. “Favourites” touch key Microphone. Touch key for answer – flashing = incoming call. – steady: communication in progress. Entrance panel / scrolling activation touch key Door release key –...
Page 8
User manual Use of Classe 300EOS Your Classe 300EOS has a wide range of features: in addition to the Video door entry functions, you can also use it to control your MyHOME home and the Alarm System. All functions require device interaction: remotely through the dedicated Apps, or using voice commands through Amazon Alexa.
Page 9
To use the basic Amazon Alexa® voice commands (weather, music, etc.), simply connect your Amazon account or create a new one.. To use MyHOME voice commands (e.g.: switch on a light), it will be necessary to install the Alexa App on your smartphone and activate the dedicated "Legrand-Netatmo-Bticino" skill.
Page 10
To use the basic Amazon Alexa® voice commands (weather, music, etc.), simply connect your Amazon account, or create a new one. To use the commands (e.g. activate the arming scenario), you must install the Alexa App on your smartphone and activate the dedicated "Classe 300EOS with Netatmo" skill...
Page 11
Classe 300EOS User manual Use from the device Home Page This page can show different contents based on the configuration mode (physical or from the menu). Below is the Home Page with all the functions enabled. 19:32 Dashboard Lights Shutters...
Classe 300EOS User manual Function status Icon Meaning The connection of the device to a Wi-Fi Wi-Fi connection active and not network has been activated, but not connected. connected to a Wi-Fi network. The Wi-Fi signal is not sufficient to Weak Wi-Fi signal.
Page 13
Classe 300EOS User manual Favourites In addition to the specific panels (room and general commands), it is possible to control objects and their functions individually by placing them on the Favourites page. The installer will first need to configure the objects. After this, you will be able to place them in your Favourites page, for easier control of your home: for example, to switch on the lights, to make an intercom call, etc.
Page 14
Classe 300EOS User manual Add an object to the favourites NOTE: If the device has been physically configured, it is not possible to delete or modify the video door entry objects but only customise their names. 19:32 FAVORITES EDIT FAVORITES...
Page 15
Classe 300EOS User manual Modify an object For each object it is possible to modify its description, move it or delete it. FAVORITES EDIT FAVORITES Homepage Homepage Voicemail Voicemail Ringtone Ringtone Others Others CALL Intercom Intercom Kitchen Light Kitchen Light...
Page 17
Classe 300EOS User manual Notifications In this page it is possible to display the messages of the video door entry answering machine and the system messages. If there are new messages recorded on the answering machine or a system message (e.g.: software update available), a visual notification appears on the notification bar (A).
Classe 300EOS User manual Firmware update When a new firmware update is available, the system automatically downloads it and sends a notification message. The firmware may then be installed immediately or postponed to another time. Note: the update file can be up to 500Mb in size.
Page 19
Classe 300EOS User manual UPDATE NOTIFICATIONS Today Firmware installed Version 0.16.2 correctly 15:27 installed Installing updates. Device update available. This may take some time When do you want to install it? Install now Today - 10:00 Today - 14:00 Custom CONTINUE 6.
Page 20
Classe 300EOS User manual Video door entry functions Answer a call • Call another room or apartment (intercom) • Main Entrance Panel or Cameras direct auto-switching on • Open the Entrance panel door lock and/or perform an activation • Listen to the video door entry answering machine •...
Page 21
Classe 300EOS User manual Answer a call When a call is received from the Entrance Panel, the communication key flashes and the door lock key comes on. After a few seconds, the display shows the image taken by the Entrance panel.
Page 22
Classe 300EOS User manual Swipe down for adjustments Brightness Contrast Color Speaker volume A Adjusts the image brightness. Adjusts the image contrast. C Adjusts the image colour D Adjust the volume. 5. Scroll to adjust the parameters 6. Press to open the entrance panel door lock, the door lock key lights up briefly, to indicate that...
Classe 300EOS User manual Call another room or apartment (intercom) It is possible to communicate with another device installed in another room of the apartment or with a device of another apartment. In order to be able to make intercom calls, the installer must first configure the corresponding...
Page 24
Classe 300EOS User manual When the Internal Unit answers, the LED comes on steady and the keys used to disable audio and microphone appear. Swipe down for adjustments Speaker volume Speaking Speaking Intercom Intercom 3. If necessary scroll down to adjust the audio parameters.
Page 25
Classe 300EOS User manual Main entrance panel or cameras direct auto-switching on Using the automatic switch on key it is possible to display the main Entrance Panel camera and, if installed, scroll through other Cameras/Entrance Panels. Using the Camera object, (appropriately configured by the installer and then included in your Favourites) page), it is possible to directly view a certain Camera or Entrance Panel.
Page 26
Classe 300EOS User manual Swipe down for adjustments A During the conversation, it is possible to modify the audio/video parameters or mute the microphone (for details see Answer a call section). 3. Touch to display another Entrance Panel or Camera (using the scrolling service, if preset by the installer during the configuration phase).
Page 27
Classe 300EOS User manual FAVORITES Homepage Voicemail Ringtone Others VIEW Camera Kitchen Light Bathroom socket EDIT FAVORITES 2. . Touch to activate the entrance panel or the desired Camera.
Page 28
Classe 300EOS User manual Open the Entrance panel door lock and/or perform an activation It is possible to open the main Entrance panel door lock, using the door lock key. Using the Activation object, (appropriately configured by the installer and then included in your Fauvourites page), it is also possible to activate certain actuators (e.g.
Classe 300EOS User manual FAVORITES Homepage Voicemail Ringtone Others OPEN Attivazione Kitchen Light Bathroom socket EDIT FAVORITES 3. Touch the desired activation. Listen to the video door entry answering machine When there are one or more unread messages in the answering machine, the corresponding LED comes on.
Page 30
Classe 300EOS User manual NOTIFICATIONS MISSED CALL Today Swipe down for adjustments Missed video call 15:27 DELETE MESSAGE Message 1/1 July 13, 15:30 Date and time the message was recorded. C Indicates that the message is still to be displayed D Delete the message 3.
Page 31
Classe 300EOS User manual Paging This function can be used to broadcast voice messages to the compatible devices, using the corresponding object found in the favourites page. 19:32 FAVORITES Homepage Voicemail Ringtone Others Dashboard CALL Pager Lights Shutters Thermostats Fans...
Classe 300EOS User manual Door status This function indicates through the door lock LED if the entrance door is open or closed. In order to use this function, a door lock actuator 346260 and corresponding magnetic contact must be present in the system.
Page 33
Classe 300EOS User manual Professional Studio (Office) When a call is received from the Entrance Panel, this function automatically opens the associated door lock without the need for pressing the door lock control key. Contact the installer to enable this function.
Page 34
Classe 300EOS User manual Safe door lock When active, this function prevents the opening of the Entrance Panel door lock unless communication with the same is active. Therefore, the opening of the door lock is only permitted when Entrance Panel and Internal Unit are in voice communication.
Page 35
Classe 300EOS User manual Inductive loop (only item 344845) The INDUCTIVE LOOP service enables the device to be used by people wearing hearing aids with (T) selector. Switch the acoustic device to the T position. To ensure correct magnetic coupling between the handset and the acoustic device, we recommend a position in front of the device, at a distance of 25 - 35 cm.
Page 36
Classe 300EOS User manual MyHOME functions The MyHOME functions can be activated from the Favourites page or using the panels on the Home Page. For some functions (e.g. lights), in the relevant panel it is possible to perform general or room actions (...
Page 37
Classe 300EOS User manual Lighting Lights function panel This panel can be used to simultaneously switch on/off all the lights in the house, as well as switch on/off all the lights in a single room 19:32 Lights Turn OFF Turn ON...
Page 38
LED lamps), allows you to adjust the brightness of a light and display its status. *NOTE: The device may not be compatible with some models or their firmware versions. BTicino is not responsible for any present and future malfunctionings or incompatibilities which can be attributed to third-party devices.
Page 39
Classe 300EOS User manual Dmx dimmer FAVORITES FAVORITES Others Others Dmx dimmer Livingroom Dmx dimmer Livingroom 1. Touch to switch the light on and off The blue colour indicates the ON status 2. Touch and scroll to the left/right to decrease/increase the brightness...
Page 40
Classe 300EOS User manual Shutters Shutters function panel (with opening level adjustment) This panel can be used to simultaneously open/close all the shutters in the home, as well as open/ close all the automations in a single room 19:32 Shutters...
Page 41
Classe 300EOS User manual Shutters function panel This panel can be used to simultaneously open/close all the shutters in the home, as well as open/ close all the automations in a single room NOTE: In addition to shutters, the commands in this panel also affect rolling shutters and blinds...
Page 42
Classe 300EOS User manual Shutter with opening level adjustment In case of system devices compatible with the preset function and if this function has been enabled by the installer, in addition to ordering the full opening or closing of the shutter, you will also be able to use the cursor to open/close the shutter gradually.The opening level may be...
Page 43
Classe 300EOS User manual Thermoregulation (temperature control) Fans function panel This panel can be used to simultaneously switch on/off all the fancoils in the house, as well as to switch on/off or adjust the speed of the fancoils in a single room.
Classe 300EOS User manual Thermostats function panel This panel can be used to force the switching on of the system (BOOST) in each individual zone where there is at least one thermostat. Using the simple programming function, it is also possible to program the temperature over time.
Classe 300EOS User manual Simple program This mode can be used to set different “Day” and “Night” band temperatures. Example: we want to set a temperature of 21.5° from 7 a.m. to 10 p.m. and a temperature of 19.5° from 10 p.m. to 7 a.m.
Ringtone Voicemail Ringtone 1. A notification about humidity appears on the display of Classe 300EOS (A); touch to open the notification panel. 2. The notification (B) indicates that cooling inside the room has been temporarily switched off due to high humidity.
Page 47
4. When the humidity is back to acceptable levels, a notification (A) appears on the display of Classe 300EOS; touch to open the notification panel. The notification (B) indicates that the humidity level has returned to within the normal parameters and the operation of the cooling system resumes as normal.
Classe 300EOS User manual Load control Energy function panel This panel can be used to display the consumption of a certain load. 19:32 Energy 238W 127W 954W Tumble dryer Washing Refrigerator machine Hairdryer A The load is not in operation...
Page 49
C Displays monitored lines and their instantaneous production Load control management In the event of energy overload, a notification appears on the display of Classe 300EOS indicating that one or more loads (those with lower priority) have been switched off to prevent the meter from tripping.
Page 50
Classe 300EOS User manual Momentary exclusion of the load from load control 19:32 To prevent overconsumption Asciugatrice has been switched off. You can pause it from load control and switch it back on for the next 2 hours. PAUSE LOAD CONTROL...
Page 51
Classe 300EOS User manual Services Socket This object, associated to a controlled socket on the system, allows you to manage it. Socket FAVORITES FAVORITES Others Others Bathroom socket Bathroom socket 1. Touch to activate/deactivate the device connected to the socket.
Page 52
Classe 300EOS User manual Scenarios This object allows you to automatically perform several actions at the same time. There are 2 types of scenarios: – Default scenarios, which allow to simultaneously control several devices in the system using a single command directly from the App.
Page 53
Classe 300EOS User manual Alarm System functions The Alarm system functions are only available from the relevant panel on the home page. Note: In order to be able to use the functions of the Alarm system, your installer needs to connect an...
Page 54
Classe 300EOS User manual Activate/deactivate the Partitions In this page, it is possible to activate/deactivate the Alarm System only in some parts of the plant (partitions). For example, I can activate all the perimeter sensors in the system (Perimeter Sensors partition).
Page 55
Classe 300EOS User manual Activate Arming scenarios In this page, it is possible to activate the Alarm System using the arming scenarios. For example, I can activate all the partitions in the system (“Total” arming scenario). Refer to your installer for information on configuring the Alarm System...
Page 56
Classe 300EOS User manual Manage the Alarm system alarm A warning is displayed on the homepage in case of Alarm system alarm. It is possible to disarm the entire system, or momentarily silence the alarm, or check the affected partitions and then only disarm these, leaving the others armed.
Page 57
Classe 300EOS User manual 19:32 19:32 19:32 Insert security code Perimeter Sensors Disarm Partitions Perimeter Sensors Arm with delay Armed Volumetric sensors Triggered 4. Touch to select the partition to be managed 5. Select to disarm 6. Enter the Alarm system code (default 147258)
Remote use Thanks to the dedicated Home+Control and Home+Security apps, you can use the functions of your Classe 300EOS also remotely. The use of these apps, individually or in combination, depends on the configuration of your plant. The following table shows the possible cases.
Page 59
Classe 300EOS User manual Remote control of the Video door entry functions No configuration by the installer Control of the Video door entry system using the Home+Security app After completing this procedure, you will be able to control the following functions remotely: –...
Page 60
Configuration Caution Before starting setup be sure this icon is not shown on top right corner of Classe 300EOS with Netatmo Use the Setup code homepage, and the device is connected to internet. Otherwise go to Classe 300EOS with Netatmo...
Page 61
Controllo da remoto delle funzioni di Videocitofonia The QR Code is available in the Settings\My App menu 19:32 Voicemail Ringtone 9. Touch the screen of the Classe 300EOS 10. Touch to open the Settings section SETTINGS SETUP Door entry system...
Page 62
Home + Control app to continue configuration Scan the QR code Scan the QR code on Classe 300EOS with Netatmo screen with your smartphone. Scan setup code from Home + Securi- ty or Home + Control app to continue...
Page 63
Classe 300EOS User manual Controllo da remoto delle funzioni di Videocitofonia Home Congratulations! Lock You completed the configuration process HOLD TO ACTIVATE Launch the app Open the tutorials 18. Touch to start the app 19. Touch to remotely control the video door entry functions.
Page 64
Classe 300EOS User manual Remote control of the Video door entry and MyHOME functions Configuration of the MyHOME functions by the installer Control of the Video door entry system using the Home+Security app and of the MyHOME functions using the Home+Control app After completing this procedure, you will be able to control the following functions remotely: –...
Page 65
Classe 300EOS User manual In order to remotely control these functions, first of all download the Home + Security app and the Home + Control app from the Stores (for iOS® devices from App Store, for Android® devices from Play Store) 1.
Page 66
Caution MyHOMEServer1 Before starting setup be sure this icon is not shown on top right corner of Classe 300EOS with Netatmo Use the Setup code homepage, and the device is connected to internet. Otherwise go to Classe 300EOS with Netatmo...
Page 67
Fans Energy 0.8 kW +0.2 kW Favorites SHOW MORE Voicemail Ringtone 10. Touch the screen of the Classe 300EOS 11. Touch to open the Settings section SETTINGS SETUP Door entry system Get control of the alarm Home + Security Network...
Page 68
Home + Control app to continue configuration Scan the QR code Scan the QR code on Classe 300EOS with Netatmo screen with your smartphone. Scan setup code from Home + Securi- ty or Home + Control app to continue...
Classe 300EOS User manual Controllo da remoto delle funzioni di Videocitofonia e MyHOME Home 2 Errors Bathroom Click here to conclude the Kitchen Office Bathroom Toilette configuration This might take a few minutes. Please do not close the app during this time.
Page 70
Classe 300EOS User manual Controllo da remoto delle funzioni di Videocitofonia e MyHOME Login Home E-mail J.Smith@bticino.com Password ********** Lock HOLD TO ACTIVATE Forgotten password? Login 26. Enter the login details of the Home+Control app 27. Touch to continue. 28. Touch to remotely control the video door entry functions.
Page 71
Classe 300EOS User manual Remote control of the Video door entry and Alarm system functions Connection of the Alarm control unit by the installer Control of the Video door entry system and Alarm system using the Home+Security app After completing this procedure, you will be able to control the following functions remotely: –...
Page 72
Configuration Caution Before starting setup be sure this icon is not shown on top right corner of Classe 300EOS with Netatmo Use the Setup code homepage, and the device is connected to internet. Otherwise go to Classe 300EOS with Netatmo...
Page 73
19:32 Dashboard Alarm system ARMED Favorites SHOW MORE Voicemail Ringtone 9. Touch the screen of the Classe 300EOS 10. Touch to open the Settings section SETTINGS SETUP Door entry system Get control of the alarm Network Display Home + Security...
Page 74
Home + Control app to continue configuration Scan the QR code Scan the QR code on Classe 300EOS with Netatmo screen with your smartphone. Scan setup code from Home + Securi- ty or Home + Control app to continue...
20. The device is correctly associated with the Home + Security App; touch to continue 21. Scan the QR code on the device and touch to get control of the alarm system The QR Code is available in the Settings\Get control of the alarm menu 22. Touch the screen of the Classe 300EOS...
Page 76
Classe 300EOS User manual Controllo da remoto delle funzioni di Videocitofonia e Antifurto 19:32 Dashboard Alarm system ARMED Favorites SHOW MORE Voicemail Ringtone 23. Touch to open the Settings section SETTINGS Door entry system Get control of the alarm Network...
Page 77
Scan the QR code from your Home + Security app Open Home + Security app, then go in the Classe 300EOS settings, tap on "Get control of this product”. Now scan the QR code above from the app. OK, SCANNED CODE...
Page 78
Classe 300EOS User manual Controllo da remoto delle funzioni di Videocitofonia e Antifurto The alarm system has been associated with the Home+Security app, and the Home Page contains both the video door entry system page and the Alarm System. In order to use the Alarm system commands, it will be necessary to register the security code A wizard automatically suggests the steps for the activation of the Alarm System arming code.
Page 79
Classe 300EOS User manual Controllo da remoto delle funzioni di Videocitofonia e Antifurto Home Home Accessories Door Locks Accessories Door Locks Alarm system Alarm system Disarmed Disarmed Alarm system Alarm scenarios Device settings 7. Touch the Alarm system 8. Touch to arm/disarm the Alarm system...
Page 80
Classe 300EOS User manual Remote control of the Video door entry, Alarm and MyHOME functions Configuration of the MyHOME functions and connection to the alarm control unit by the installer Control of the Video door entry and Alarm system using the Home+Security app...
Page 81
Classe 300EOS User manual Controllo da remoto delle funzioni di Videocitofonia Antifurto e MyHOME In order to remotely control these functions, first of all download the Home + Security app and the Home + Control app from the Stores (for iOS® devices from App Store, for Android® devices from Play Store) 1.
Page 82
Caution MyHOMEServer1 Before starting setup be sure this icon is not shown on top right corner of Classe 300EOS with Netatmo Use the Setup code homepage, and the device is connected to internet. Otherwise go to Classe 300EOS with Netatmo...
Page 83
Alarm system 0.8 kW +0.2 kW ARMED Favorites SHOW MORE Voicemail Ringtone 9. Touch the screen of the Classe 300EOS 10. Touch to open the Settings section SETTINGS SETUP Door entry system Get control of the alarm Home + Security Network...
Page 84
Home + Control app to continue configuration Scan the QR code Scan the QR code on Classe 300EOS with Netatmo screen with your smartphone. Scan setup code from Home + Securi- ty or Home + Control app to continue...
Classe 300EOS User manual Controllo da remoto delle funzioni di Videocitofonia Antifurto e MyHOME Home 2 Errors Bathroom Click here to conclude the Kitchen Office Bathroom Toilette configuration This might take a few minutes. Please do not close the app during this time.
Page 86
Classe 300EOS User manual Controllo da remoto delle funzioni di Videocitofonia Antifurto e MyHOME The QR Code is available in the Settings\Get control of the alarm menu 21. Touch the screen of the Classe 300EOS 19:32 Dashboard Lights Shutters Thermostats...
Page 87
Classe 300EOS User manual Controllo da remoto delle funzioni di Videocitofonia Antifurto e MyHOME SETTINGS Door entry system Get control of the alarm Network Display User My App Amazon Alexa Help Other Advanced settings 23. Touch the item "Get control of the alarm”...
Page 88
Scan the QR code from your Home + Security app Open Home + Security app, then go in the Classe 300EOS settings, tap on "Get control of this product”. Now scan the QR code above from the app. OK, SCANNED CODE...
Classe 300EOS User manual Controllo da remoto delle funzioni di Videocitofonia Antifurto e MyHOME Using the Home+Security app, you will now also be able to manage the Alarm system and the video door entry functions. In order to use the Alarm system commands, it will be necessary to register the security code.
Classe 300EOS User manual Controllo da remoto delle funzioni di Videocitofonia Antifurto e MyHOME Home Home Accessories Door Locks Accessories Door Locks Alarm system Alarm system Disarmed Disarmed Alarm system Alarm scenarios Device settings 8. Touch the Alarm system 9. Touch to arm/disarm the Alarm system or an Alarm system scenario...
User manual Remote control of the Alarm system for secondary users After associating Classe 300EOS with the Home + Security app for the first time, it is possible for other users to gain control of it. To control the device, the user must: –...
Page 92
Classe 300EOS User manual The QR Code is available in the Settings\Get control of the alarm menu 5. Touch the screen of the Classe 300EOS...
Page 93
Classe 300EOS User manual 19:32 Dashboard Alarm system ARMED Favorites SHOW MORE Voicemail Ringtone 6. Touch to open the Settings section SETTINGS Door entry system Get control of the alarm Network Display User My App Amazon Alexa Help Other Advanced settings...
Page 94
Scan the QR code from your Home + Security app Open Home + Security app, then go in the Classe 300EOS settings, tap on "Get control of this product”. Now scan the QR code above from the app. OK, SCANNED CODE...
Page 95
Classe 300EOS User manual You can now control the alarm system remotely Home Home Accessories Door Locks Accessories Door Locks Alarm system Alarm system Disarmed Disarmed Alarm system Alarm scenarios Device settings 8. Touch the Alarm system 9. Touch to arm/disarm the Alarm system or an Alarm system scenario...
Page 96
Amazon support directly. Available voice controls After associating the Alexa® account with Classe 300EOS, it will be possible to use the basic Amazon Alexa® voice commands (weather, music, etc.). It will also be possible to use advanced voice commands by installing the Alexa® App on your smartphone and activating dedicated skills: –...
App. If already associated, it manages guests. Runs a tutorial that explains the steps to associate the Help device to the Netatmo Legrand BTicino skills. C Advanced settings NOTE: These settings are reserved for the installer. For more details, contact your installer.
Page 98
Classe 300EOS User manual General This section contains the general settings and device information. GENERAL Global Language English Set date and time automatically from network Time will be set automatically once the device is connected to internet Timezone Rome (GMT +01)
Classe 300EOS User manual Date and time Set the current date and time. Set the automatic date and time. GENERAL TIMEZONE Global Choose a timezone Language English GMT 00 London, Lisbon, Dublin Set date and time GMT +1 Rome, Paris, Berlin...
Page 100
Classe 300EOS User manual Set the date and time manually GENERAL GENERAL DATE Global Global Tap the values that you want to edit Language English Language English 09 / 03 / 2021 Set date and time Set date and time...
Page 101
Classe 300EOS User manual Video internal unit Video door In this section it is possible to set some video door entry basic parameters such as the entry answering machine and the ringtones. The modification of advanced video door entry system parameters, such as Addresses, Intercom, Cameras and Activation, is reserved for the installer.
Page 102
Classe 300EOS User manual VIDEO QUALITY DOOR ENTRY Select video registration quality Voicemail Low quality Voicemail High quality Greetings message Video registration quality High RECORD A NEW GREETINGS MESSAGE Ringtones Ringtone volume High Main external unit Intercom 2. Set if video messages must be recorded in high resolution (maximum 25 x 15 sec. messages), or in low resolution (maximum 35 x 15 sec.
Page 103
Classe 300EOS User manual Ringtones This section can be used to modify the ringtone volume and associate a specific melody to some events (call). DOOR ENTRY Voicemail Greetings message Video registration quality High RECORD A NEW GREETINGS MESSAGE Ringtones Ringtone volume...
Page 104
Scan the QR code from your Home + User Security app Open Home + Security app, then go My App in the Classe 300EOS settings, tap on "Get control of this product”. Now scan Amazon Alexa the QR code above from the app. Help...
Page 105
We would like to inform you that the service provided by BTicino by means of remote use via the App involves the use of data. The cost linked to data usage depends on the type of contract which the customer has with his ISP (Internet Service Provider) and is solely the customer’s responsibility.
Page 106
Classe 300EOS User manual NETWORK CONNECTION TYPE Parameters Choose the type of network Connection type Ethernet Wi-Fi Connection on/off Ethernet LAN Home A Enable/disable the network connection Touch to select which type of network connection your device will use to connect to your home router.
Page 107
Classe 300EOS User manual ETHERNET ETHERNET Parameters Parameters DHCP DHCP Automatic configuration of network parameters Automatic configuration of network parameters IP address 192.168.2.102 IP address 192.168.2.102 Subnet mask 255.255.255.0 Subnet mask 255.255.255.0 Gateway 192.168.2.1 Gateway 192.168.2.1 MAC address 00:03:50:c0:00:33 MAC address 00:03:50:c0:00:33 7.
Page 108
Classe 300EOS User manual Connection to the network using Wi-Fi technology CONNECTION TYPE NETWORK NETWORK Choose the type of network Parameters Enter password Wi-Fi Connection type Wi-Fi 123456– Ethernet Connection on/off Select network 5GHz Wi-Fi networks are not supported My Home...
Page 109
Classe 300EOS User manual NETWORK My Home My Home Parámetros Parameters Parameters Connection type Wi-Fi Signal -50dB Signal -50dB Connection on/off DHCP DHCP Automatic configuration of network parameters Automatic configuration of network parameters My Home IP address 192.168.2.102 IP address 192.168.2.102...
Classe 300EOS User manual Amazon Alexa® This section can be used to associate the device with Amazon Alexa® and take advantage of its features (see section Use with Amazon Alexa®). After the association, it is possible to set some parameters.
Page 111
Classe 300EOS User manual My App This section can be used to associate the device with the Home+Security App (video door entry functions and Alarm system) and the Home+Control App (MyHOME functions). To disassociate the device, all the associated accounts must be removed.
Page 112
Netatmo Legrand BTicino skills. HELP AMAZON ALEXA SKILLS Help Amazon Alexa skills For all the Alexa features of your Classe 300EOS with Netatmo, enable the following two skills CONTINUE 1. Touch to display the tutorial. 2. Follow the tutorial step by step.
Page 114
BTicino SpA Viale Borri, 231 21100 Varese www.bticino.com BTicino Spa reserves at any time the right to modify the contents of this booklet and to communicate, in any form and modality, the changes brought to the same.
Need help?
Do you have a question about the Classe 300EOS and is the answer not in the manual?
Questions and answers