Function And Features; Installation Guide - BEMIS bioBidet Slim Zero User Manual

FUNCTION & FEATURES
Side Lever (2 Washes)
Seat Sensor
This product includes a built-in seat sensor to avoid any accidental sprays
while powered. Skin contact is required to activate any wash functions
while powered.
Front
Wash
Adjust the water pressure by rotating the control knob button
Rear
Wash
Adjust the water pressure by rotating the control knob button
Stop/ "Off" Adjust the lever to the middle position to
turn any wash functions off.
Night Light Easily find your way at night. Press the night light button
(2 Light Modes)
once to turn the light on. Press again to dim the light.
Press a third time to turn it off.
The night light automatically turns off after 7 hours.
Press the button to reset the 7 hour timer.
8 PRODUCT INFORMATION

INSTALLATION GUIDE

Please be advised that the provided t-valve should be installed at
the fill valve under the toilet tank, NOT down at the water supply coming
from the wall. Inspect your current water supply line that connects to
the toilet tank fill valve to ensure it is a flexible water supply hose before
installing. The hose needs to be 7/8" (to connect to the t-valve we provided)
on one end, and either 3/8" or 1/2", (depending on your wall valve) on the
other end. If you are experiencing difficulty, contact Bio Bidet customer
support at 847.458.2334 and we may be able to provide alternative fittings.
1. Turn Off Water
Turn off the water shut-off valve.
Drain the toilet tank completely by
flushing the toilet. Unscrew the hose
connected to the toilet tank.
You may want to have a towel ready
to catch any residual water.
2. Remove Toilet Seat
Remove mounting bolts to release the
existing toilet seat from the toilet.
INSTALLATION
Existing
Toilet Hose
9