Front Panel Displays, Controls, Push-Buttons And Jack - McIntosh C50 Owner's Manual

Meter indicates the
Left Channel Output
of the Preamplifier
INPUT Control al-
lows the selection of
various sources for
listening and record-
ing
Connection for low
impedance dynamic
headphones, for
private listening
PROCESSOR Push- EQualizer BYPASS
button with indicator, Push-button with indica-
when activated places tor, when activated the
an externally connected audio signal bypasses the
signal processor in the Equalizer Controls, also
listen signal path used to enter and exit the
Setup Mode
12
IR Sensor receives
commands from a
Remote Control
TRIM Push-button INFORMATION DISPLAY
with indicator, allows indicates the Sources, Vol-
selection of various ume, other Audio Settings,
types of settings Operational Functions and
Setup Mode Settings

Front Panel Displays, Controls, Push-buttons and Jack

EQUALIZER Controls increase or
decrease the volume levels at the
Center Frequencies of 25Hz, 50Hz,
100Hz, 200Hz, 400Hz, 1,000Hz,
2,500Hz and 10,000Hz
MUTE Push-button
mutes the audio from
the Loudspeakers and
Headphones
Meter indicates the
Right Channel Output
of the Preamplifier
VOLUME Control
allows adjustment
of the listening level
for both channels
STANDBY/ON
Push-button with
indicator, switches
the C50 ON or OFF
(Standby) and resets
the microprocessors
OUTPUT 1 and 2
Push-buttons with
indicators, switch the
Preamplifier Outputs
1 and 2 On or Off