Advertisement
Quick Links
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Skyrc NC3000 Pro
Summary of Contents for Skyrc NC3000 Pro
- Page 1 40 Instruction Manual NC3000 Pro AA/AAA NiMH/NiCD Battery Charger & Analyzer - 1 -...
- Page 2 Contents Introduction Warning Features Specifications Battery Knowledge Power and Battery Connection Charging Operation Working Mode Parameters Configuration Charging Current Automatic Adjusted Status LED Explained Rescue Batteries Working with the SkyCharger app Status LED Explained In The Box System Settings Conformity Declaration Warranty and Service - 2 -...
- Page 3 NC3000 Pro is a versatile charger designed specifically for AA/AAA NiMH and NiCd batteries, combining charging, discharging, and analysis functions in one device. It supports QC2.0 and QC/PD3.0 inputs, and with its four independent slots, NC3000 Pro can charge up to four batteries simultaneously.
- Page 4 Warning Never charge batteries other than NiMH or NiCD. Please read the battery's manual to ensure it can accept the programmed charge/discharge rates. Never expose the unit to rain or moisture to avoid fire. Never use the charger if it appears damaged. Do place the battery with a positive terminal facing the top.
- Page 5 Specifications Input Power PD, QC 30W Quick Charge Protocol QC2.0, QC3.0, PD3.0 Battery Type NiMH/NiCD Battery Size AA/AAA Charge Power Max. 22W Discharge Power Max. 15W Charge Rate 0.20-3.00A w/ increments of 0.10A Discharge Rate 0.20-2.50A w/ increments of 0.10A Trickle Charge Rate 10-300mA &...
- Page 6 Battery Knowledge What is the Meaning of “mAh” on Rechargeable Batteries? mAh stands for milliamp hour, a unit that measures electric power over time. It is commonly used to indicate a battery's energy capacity. Generally, a higher mAh value means greater battery capacity and longer battery life.
- Page 7 Battery Knowledge AA Batteries Battery Capacity(mAh) Charge Rate(mA) Discharge Rate(mA) 1800 1800 2200 2000 2400 2000 2600 2000 2700 2000 1200 Battery Matching Most electronic devices require two or more batteries to operate together. In such cases, the overall power performance is limited by the weakest battery. In other words, a poorly performing battery will reduce the device's operating time.
- Page 8 Power and Battery Connection 1. Connect to a PD/QC 30W or higher power adapter, ensuring the input power complies with QC2.0, QC3.0, and PD3.0 input standards. 2. Insert AA or AAA batteries. Note: Always insert the Negative(-) terminal FIRST as shown in the diagram. Insert AA batteries Insert AAA batteries - 6 -...
- Page 9 Charging Operation Scan or Click to Watch 8B6F- Charge setting Charge setting 1.26 0.00 Mode Mode Charge Charge Charge 1.26 0.00 Capacity Capacity 2000 mAh 2000 mAh Discharge 1.26 0.00 C. Current C. Current 1.00 A 1.00 A Break_in Target Volt Target Volt 1.65 V 1.65 V...
- Page 10 Charging Operation Scan or Click to Watch Charge setting Charge setting Charge setting Timer Cut-Off 180min Current Mode Current Mode Fixed Fixed Fixed Restart Volt 1.35 V Start Start 10mA IR Auto -Δ V 10 mV Back Back 20mA Trickle Charge 10 mA 30mA Select Trickle Charge...
- Page 11 Working Mode This charger provides up to six charging modes of Charge, Discharge, Break-in, Cycle, MaxBoost, and Turbo, fully meeting the charging requirements of different batteries. Charge Applicable for charging the batteries in a good performance and continuous use. The charging process terminates when the battery is full or some other termination criteria have been met.
- Page 12 Parameters Configuration Capacity This capacity serves both as the battery's rated capacity and as a protective setting. In Break- in mode, this option is labeled as rated capacity and the user is required to select the rated capacity of the battery. In other working modes, this option is to protect the battery. For example, select 4200mAh for a 20% buffer on a 3500mAh rated battery.
- Page 13 Parameters Configuration -ΔV A technical parameter to control charge termination of NiMH/NiCd batteries. When charging a battery at constant current, the voltage will be decreased slightly around full charge completion. By monitoring this voltage drop, the charger can accurately detect if the batteries are fully charged or not.
- Page 14 Charging Current Automatic Adjusted The internal resistance of the battery usually increases as it is used. When the battery is used for a long time, its internal resistance will increase. The internal resistance consumes part of the electric energy when charging and causes the battery to heat up at the same time. The charger supports battery internal resistance detection.
- Page 15 Rescue Batteries If the batteries are still not performing well after trying all the modes as in the manual, refer to the battery rescue steps below: 1. Use the Cycle mode once to three times. 2. Change to Break-in mode if the capacity is still low. 3.
- Page 16 Errors Explained In case of a fault, NC3000 Pro will display an error message as shown in the table below, which users can refer to for troubleshooting guidance. Error Message Explanation DC In Too Low! The input voltage is lower than 4.7V!
- Page 17 System Settings Press and hold the Scroll button to enter System Settings. Option Definition Language Select your preferred language LCD Backlight Adjust the screen brightness. Key Press Beep Adjust the key volume Notif. Beep Adjust the error and completion beep volume Choose how you’d like to be notified when the program is complete.
- Page 18 Conformity Declaration SkyRC NC3000 Pro complies all the relevant and mandatory CE directives and FCC Part 15 Subpart B. - 16 -...
- Page 19 This charger is designed and approved exclusively for use with the types of battery stated in this Instruction Manual. SkyRC accepts no liability of any kind if the charger is used for any purpose other than that stated. We are unable to ensure that you follow the instructions supplied with the charger, and we have no control over the methods you employ for using, operating, and maintaining the device.
- Page 20 The manual is subject to change without notice; please refer to our website for the latest version! Manufactured by SKYRC TECHNOLOGY CO., LTD. Floors 4, 5, & 8, Building 4, Meitai Technology Park, Guanguang South Road, Guanlan, Longhua District, Shenzhen 518110, China www.skyrc.com...
Need help?
Do you have a question about the NC3000 Pro and is the answer not in the manual?
Questions and answers