Related Manuals for Flymo 18V UltraTrim 300
Summary of Contents for Flymo 18V UltraTrim 300
- Page 1 Page 1 width 2 mm less: 208 mm ® 32703-85.960.01 18V UltraTrim 300 PNC 970755601 18V UltraTrim 300 KIT PNC 970755501 Operator‘s manual Battery Trimmer...
- Page 2 Fold-out Page width 5 mm less: 205 mm...
- Page 3 Fold-out Page width 5 mm less: 205 mm Wp L3 L2 L1...
-
Page 4: Safety Instructions
Battery trimmer 3) Personal safety 18V UltraTrim 300 a) Stay alert, watch what you are doing and use common sense when operating a machine. Do not use a machine while you are tired or under the influence of drugs, alcohol or medication. A moment of inattention while Original instructions operating machines may result in serious personal injury. -
Page 5: Additional Safety Instructions
At temperatures < 0 °C, performance may be reduced depending on the device. The FLYMO Trimmer is intended to trim and to cut lawn and areas of grass in ￫ Charge the battery only at ambient temperatures between 0 °C and + 45 °C. -
Page 6: Operation
2. ASSEMBLY 3. Slide the battery charger onto the battery When the battery charge indicator on the charger is flashing green, DANGER! the battery is charging. When the battery charge indicator on the battery charger glows Cutting injury caused by the cutting filament. green continuously, the battery is fully charged (charging time, If the product starts unintentionally, people can be injured by the see 7. -
Page 7: Maintenance
You can obtain the replacement filament cassette or the cassette cover from your FLYMO dealer or directly from the FLYMO customer service. The cutting filament length indicator lights up if the cutting filament is too short and the trimmer is not cutting / loaded when the motor is running. -
Page 8: Troubleshooting
Cutting injury caused by the cutting filament. dealers approved by FLYMO. If the product starts unintentionally, people can be injured by the ￫ Please contact your FLYMO service centre in the event of other faults cutting filament. (see reverse). ￫ Wait until the cutting filament has stopped before troubleshooting the product. -
Page 9: Accessories / Spare Parts
9. WARRANTY / SERVICE life span. Li-ion 9.1 Product registration 1. Discharge the lithium-ion cells fully (contact the FLYMO customer ser- Please register your product at: vice about this). 2. Ensure that the lithium-ion cell contacts do not short-circuit by placing tape over them. - Page 10 Our policy of continuous improvement means that the specification of products may be altered from time to time without prior notice. Copyright © 2023 Flymo S.A. All rights reserved. Flymo and other product and feature names are registered or unregistered trademarks of Flymo S.A. ®...
Need help?
Do you have a question about the 18V UltraTrim 300 and is the answer not in the manual?
Questions and answers