Luverne 415102 Installation Manual

INSTALLATION MANUAL
Level of Difficulty
Easy
Installation difficulty levels are based on time
and effort involved and may vary depending on
the installer level of expertise, condition of the
vehicle and proper tools and equipment.
Parts List
Item Qty Description
1 2 Grip step board
2 4 End cap
3 8 Self tapping screw
4 10 Embossed bracket
5 20 Carriage bolt 5/16-18 x 1
6 20 Serrated flange nut, 5/16-18
7 20 Flat washer, 5/16
Tools Required
Drill Phillips head drill bit
Wrench, 1/2" --
Torque Specifications
5/16" bolt 5 ft-lbs.
Use above torque setting unless otherwise noted
Product Registration and Warranty
LUVERNE stands behind our products
with industry-leading warranties. To get
copies of the product warranties, register
your purchase or provide feedback, visit:
warranty.curtgroup.com/surveys
LUVERNETRUCK.COM
•
Product Photo
NOTICE
Visit www.luvernetruck.com for a full-color copy of this
instruction manual, as well as helpful videos, guides and much more!
Before you begin installation, read all instructions thoroughly.
Proper tools will improve the quality of installation and reduce the time required.
Periodic inspection of your product should be performed
to ensure all hardware and / or components remain secure.
To help prevent damage to the product or vehicle, refer to the specified
torque specifications when securing hardware during the installation process.
Maintenance
Mild automotive detergent may be used to clean the product. Do not use dish detergent, abrasive
cleaners, abrasive pads, wire brushes or other similar products that may damage the finish.
PRODUCT SUPPORT: 877.287.8634 415102-INS-RA 04/10/2025
• •
ECN12900 PAGE 1
• •
415102