Download Print this page

Architects And Engineers Specifications; Limited Warranty - AKG C 426B Specifications

Stereo condenser microphone

Advertisement

Architects and Engineers Specifications

The stereo microphone shall provide dual capsules, each
capable of at least nine operating patterns (omnidirectional,
cardioid, figure-eight, and six intermediate positions) and mutually
adjustable over a total operating angle of 270 degrees. Remote
switching between adjacent patterns shall be silent, thus enabling
pattern changes during recording operations. The microphone shall
provide for switchable 10 dB pre-preamp attenuation and
switchable bass cut of 12 dB/octave below
75 Hz. Each stereo section of the microphone shall provide a
Graphical Data
Cardioid
Omnidirectional
Figure-eight

Limited Warranty

Valid only in the United States. AKG Acoustics warrants AKG products against defects in material
or workmanship for a period of two years from the date of original purchase for use, and agrees to
repair or, at our option, replace any defective unit without charge for either parts or labor. Important:
This warranty does not cover damage resulting from accident, misuse or abuse, lack of reasonable
care, the affixing of any attachment not provided with the product, loss of parts or connecting the
product to any but the specified receptacles. This warranty is void unless service or repairs are
performed by an authorized service center. No responsibility is assumed for any special, incidental
Microphones · Headphones · Wireless Microphones · Wireless Headphones · Headsets · Electroacoustical Components
Specifications subject to change without notice.
AKG Acoustics GmbH
Lemböckgasse 21–25, P.O.B. 158, A-1230
Vienna/AUSTRIA
Tel: (43 1) 86 654-0*, Fax: (43 1) 86 654-516
Internet: http://www.akg.com
AKG Acoustics; A Division of Harman Pro Germany
Bodenseestraße 228, D-81243 München/GERMANY
Tel: (089) 87 16-0, Fax: (089) 87 16-200
Arbiter Pro Audio
Wilberforce Road, London NW9 6AX/ENGLAND
Tel: (0181) 202 1199, Fax: (0181) 202 7076
means for precise on-axis alignment at a distance (e. g., by means
of a narrow angle LED). The self noise level of each microphone
section shall be no greater than 14 dB (A-weighted), and the sound
pressure level at which the microphone's total harmonic distortion
reaches 0.5 % shall be no lower than 132 dB. The microphone
shall operate on phantom power, supplied to the remote control
unit, over the nominal range from 9 to 52 volts. The microphone
shall be the AKG Acoustics Model C 426 B.
or consequential damages. However, the limitation of any right or remedy shall not be effective
where such is prohibited or restricted by law. Simply take or ship your AKG product prepaid to our
service department. Be sure to include your sales slip as proof of purchase date. (We will not repair
transit damage under the no-charge terms of this warranty.) Note: No other warranty, written or oral
is authorized by AKG Acoustics, Inc. This warranty gives you specific legal rights, and you may also
have other rights which vary from state to state. Some states do not allow the exclusion or
limitation of incidental or consequential damages or limitation on how long an implied warranty
lasts, so the above exclusions and limitation may not apply to you.
AKG ACOUSTICS, U.S.
914 Airpark Center Drive
Nashville, TN 37217, U.S.A.
Tel: (615) 620-3800, Fax: (615) 620-3875
Studer Japan Ltd.
2-43-7, Uehara, Shibuya-ku, Tokyo 151-0064/JAPAN
Tel: (813) 3465-2211, Fax: (813) 3465-2214
Erikson Pro Audio
620 McCaffrey, St-Laurent, Quebec, H4T 1N1, CANADA
Tel: (514) 738-3000, Fax: (514) 737-5069
Internet: www.jam-ind.com/eriksonpro
DS-C 426 B

Advertisement

loading

This manual is also suitable for:

Xf300Xf305Xf100Xf105Ofx8400Firewire 400 pci card ... Show all