Advertisement
Specifications contd.
SOLIDTUBE Power Supply:
Power requirements:
Current consumption:
Fuse size/type:
Power supply dimensions: 9" x 2.8" x 5.9" (W x H x D),
Power supply weight:
Microphone connector:
Output connector:
LF cut:
Ground lift:
SOLIDTUBE system shipping weight: 11 lb. (5.0 kg)
Architects and Engineers Specifications
The microphone shall be a 1 inch tube type condenser with a
dedicated cardioid pattern. The diaphragm material shall be gold-
sputtered mylar foil, and the on-axis sensitivity shall be no less
than 20 mV/Pa. The inherent noise floor of the microphone shall be
no greater than 20 dB (A-weighted), and the operating sound field
for 3% THD shall be no less than 130 dB. The microphone size
shall be no greater than 2.5 inches in diameter and 8.62 inches in
Graphical Data
Limited Warranty
Valid only in the United States. AKG Acoustics warrants AKG products against defects in material
or workmanship for a period of three years from the date of original purchase for use, and agrees
to repair or, at our option, replace any defective unit without charge for either parts or labor.
Important: This warranty does not cover damage resulting from accident, misuse or abuse, lack of
reasonable care, the affixing of any attachment not provided with the product, loss of parts or
connecting the product to any but the specified receptacles. This warranty is void unless service
or repairs are performed by an authorized service center. No responsibility is assumed for any
Microphones · Headphones · Wireless Microphones · Wireless Headphones · Headsets · Electroacoustical Components
Specifications subject to change without notice.
115/230 Vac
40 mA @ 230 Vac, 80 mA @ 115 Vac
Type TO, 1 A slow blow, (5 x 20 mm)
(228 x 70 x 150 mm)
3.2 lb. (1.5 kg)
6 pin XLR
3 pin XLR
12 dB/octave, 100 Hz
isolates signal ground from
chassis ground
Cardioid
AKG Acoustics GmbH
Lemböckgasse 21–25, P.O.B. 158, A-1230
Vienna/AUSTRIA
Tel: (43 1) 86 654-0*, Fax: (43 1) 86 654-516
Internet: http://www.akg.com
AKG Acoustics; A Division of Harman Pro Germany
Bodenseestraße 228, D-81243 München/GERMANY
Tel: (089) 87 16-0, Fax: (089) 87 16-200
Arbiter Pro Audio
Wilberforce Road, London NW9 6AX/ENGLAND
Tel: (0181) 202 1199, Fax: (0181) 202 7076
Included accessories: N-SOLIDTUBE power supply unit
H-SOLID elastic shock mount suspension
MK-SOLID power supply cable 30 ft. (10 m)
W-SOLID foam wind/pop screen
Power cables (European and North
American) Custom flight case
length, and the microphone net weight shall be no greater than
2.02 pounds. The microphone shall be powered by an external
power supply. Facilities for low cut, 12 dB/octave at 100 Hz, and
pre-attenuation of 20 dB shall be included. An aluminum flight
case, all cabling, isolation shock mount, and windscreen shall be
included as standard accessories.The microphone shall be the
AKG Acoustics Model SOLIDTUBE.
special, incidental or consequential damages. However, the limitation of any right or remedy shall
not be effective where such is prohibited or restricted by law. Simply take or ship your AKG product
prepaid to our service department. Be sure to include your sales slip as proof of purchase date.
(We will not repair transit damage under the no-charge terms of this warranty.) Note: No other
warranty, written or oral is authorized by AKG Acoustics, Inc. This warranty gives you specific legal
rights, and you may also have other rights which vary from state to state. Some states do not allow
the exclusion or limitation of incidental or consequential damages or limitation on how long an
implied warranty lasts, so the above exclusions and limitation may not apply to you.
AKG ACOUSTICS, U.S.
914 Airpark Center Drive
Nashville, TN 37217, U.S.A.
Tel: (615) 620-3800, Fax: (615) 620-3875
Studer Japan Ltd.
2-43-7, Uehara, Shibuya-ku, Tokyo 151-0064/JAPAN
Tel: (813) 3465-2211, Fax: (813) 3465-2214
Erikson Pro Audio
620 McCaffrey, St-Laurent, Quebec, H4T 1N1, CANADA
Tel: (514) 738-3000, Fax: (514) 737-5069
Internet: www.jam-ind.com/eriksonpro
DS-SOLIDTUBE
Advertisement
