Page 1
BRIZA 22 HYBRID Service manual: Wall and Ceiling model - Europe Plafondmodel / Modèle de plafond Deckenmodell / Ceiling model Muurmodel / Modèle de mur Wandmodell / Wall model jaga BRIZA 22 service manuals EU 39...
THE HEAT EXCHANGER REPLACEMENT ................49 GUARANTEE ..........................50 DECLARATION OF CONFORMITY JAGA N.V. - Verbindingslaan 16 - B 3590, declares under its sole responsibility that the CEO JAGA N.V. product to which this declaration relates: BRIZA 12, BRIZA 22...
• devices are installed in a manner that makes the devices difficult to access This device is covered by the general warranty conditions of Jaga NV Jaga reserves the right to change product specifi cation at any time in line with our policy of continuous improvement and innovation.
Operational limits: An installation that does not meet the specifi ed operational limits releases Jaga NV from all liability with respect to damage to objects or people.
- cover: do not use products based on solvents or cleaning agents Dismantle the device: Jaga N.V. always focuses a lot of attention on protecting the environment. If the device is dismantled, it is important to observe the following procedures: - the device may only be dismantled by a company that is qualifi...
SPARE PARTS Note: for replacement or defective parts, contact the installer and consult the general JAGA warranty terms (see page 50). BRIZA 22: FILTER Code 8721.401 8721.402 8731.403 8731.404 8731.405 STANDARD HEAT EXCHANGER 14.8 29.3 Code 8776.0301 8776.0302 8776.0303 8776.0304 8776.0305...
- check the unit power consumption using a clip-on meter and compare the reading with the values shown in the documentation; - inspect and check that the electrical contacts and relative terminals are tightened correctly. 46 BRIZA 22 service manuals EU jaga...
For ceiling units: there are 2 extra locks at the front of the unit. Take the fi lter out of the unit. Place a the new fi lter in the unit. Wall mounting Ceiling mounting Relock the fi lter by turning the 2 or 4 locks. jaga BRIZA 22 service manuals EU 47...
Remove the 4 screws that secure the fan to the Remove the fan unit from the plate by loosening unit. 4 screws. Follow the instructions in the reverse order to re-mount the fan unit. 48 BRIZA 22 service manuals EU jaga...
4-pipe: Remove the 4 screws that secure the secure the heat exchanger and remove the heat smallest heat exchanger and remove the heat exchanger. exchanger. Follow the instructions in the reverse order to re-mount the heat exchanger unit. jaga BRIZA 22 service manuals EU 49...
The guarantee only applies to the equipment and the spare parts. Jaga has the choice between repair and replacement of the equipment or the spare parts. If there has been a change in the model, Jaga is authorised to replace the guaranteed equipment with an equivalent equipment or equivalent spare parts. In those cases where the guarantee claim is accepted, during the fi...
Page 13
NOTA jaga BRIZA 22 service manuals EU 51...
Need help?
Do you have a question about the BRIZA 22 HYBRID and is the answer not in the manual?
Questions and answers