Introduction; Controls; Front Panel Controls - Haier HLC26B - 26" LCD TV Manual De Usuario

Controls

This is a simplified representation of front panel.
Here shown may be somewhat different from your TV.

Front panel controls

1.MENU: Press to open the on-screen menu.
2. TV/AV : Press to open the input source mode. In the MENU,
button.
3.VOL +/-: Press to adjust the volume. In the MENU screen, these buttons serve as left/right buttons.
4.CH +/- : Press to scan through channels. To scan quickly through channels, press and hold down
either +/- . In the MENU screen, these buttons serve as up/down buttons.
5.POWER: Press to turn on and off the TV.
6.AV2 AUDIO IN: Connect the audio L/R cables from the video signal source to these jacks.
7.AV2 VIDEO IN: Connects the composite video cable from an external signal source to this jack.
8.Remote Sensor
DVD panel controls
DVD insert
OPEN/CLOSE NEXT
PREV
PLAY/PAUSE
STOP
Label towards back.
Please see the real set of the
DVD position.
6 TV LCD-TFT
Receivers Irsignals from the remote control.
Do not put anything near the sensor ,as its function may be affected.
OPEN/CLOSE NEXT
PLAY/PAUSE PREV
STOP
TV/AV
OPEN/CLOSE:
Press to open the disc tray, and press again to close the tray.
PLAY/PAUSE
Press to play the DVD program, and press again to pause the DVD program.
STOP
Press to stop the DVD program.
NEXT
Press to play the next program.
PREV
Press to play the previous program.
screen, these buttons serve as OK

Introduction