Osd Timeout; Osd Transparency; Screen Mode; Blue Screen - Haier HLC26B - 26" LCD TV Manual De Usuario

Function menu

OSD Timeout

1. Press MENU button and then use
select Function menu.
2. Press VOL+ or OK button and then use
select OSD Timeout.
3. Press VOL+/- button to select Short, Middle or Long.
(Short is for 5 seconds; Middle is for 10 seconds;
Long is for 15seconds)

OSD Transparency

1. Press MENU button and then use
the Function menu.
2. Press VOL+ or OK button and then use
select OSD transparency.
3. Press VOL+/- button to select Low ,Middle or High.

Screen Mode

Lets you choose the way an analog picture with a 4:3 aspect
ratio is displayed on your TV with a 16:9 ratio picture format.
Note
If a fixed image is displayed on the screen for a long time,
the image may become permanently burned on the screen
and remain visible.
1. Press MENU button and then use
Function menu.
2. Press VOL+ or OK button and then use
select Screen Mode.
3. Press VOL+/- button to select
Cinema.
Normal
Choose normal when you want to view the picture with
4:3 mode .
Zoom
Choose Zoom when you want to view the picture without
any alteration. However, the top and bottom portions
of the picture will be cropped.
Wide
Choose wide when you want to adjust the picture
horizontally, in a linear proportion to fill the entire screen.
Cinema
For letterbox pictures, bars may appear on the top and
bottom on some programs.
You can also press ARC
select the desired picture format: Normal, Zoom, Wide or
Cinema.

Blue Screen

1. Press MENU button and then use
Function menu.
2. Press VOL+ or OK button and then use
select Blue Screen.
3. Press VOL+/- button to select On or Off.
DPMS
PC Power Management. To set On, the set will be in
standby mode automatically if no signal in 2 minutes; if
signal input, the set will be on again automatically.
Note: DPMS is useful only in VGA source.
24 TV LCD-TFT
CH+/- button to
CH+/-
CH+/- button to select
CH+/-
CH+/- button to select
CH+/-
Normal, Zoom, Wide or
button on the remote control to
CH+/- button to select
CH+/-
button to
button to
button to
button to
Video Language
OSD Timeout
Audio
OSD Transparency
Screen Mode
Channel
Blue Screen
DPMS
Function
Time Setup
Lock
Closed Caption
Default
Function
Operation
English
Short
Middle
Normal
On
On
CH+/-
Select EXIT Back
VOL+/-