Setting The Time And Date - EPS Bio Technology EASYMAX Neu User Manual

Setting The Time and Date

Setting the current time and date in your meter is important if you intend to use the meter memory.
1. After inserting batteries, the
meter turns on automatically.
2. The last 2-digits of the year
flashes at the center of the
display. Press
adjust the year and Press
to confirm the setting.
3. Repeat step 2 to set the date.
The flashing field is the one
you are currently setting.
or to
If the display shows the wrong setting, please press
the buttons of
4. Repeat step 2 to select P, A
or 24 mode and then set the
time. (P=PM, A=AM,
24=24hr mode.)
and to re-set for 2 seconds.
15