EPS Bio Technology EASYMAX Neu User Manual page 21

5. Squeeze the bottle until a
tiny drop forms at the tip of
the control solution cap.
6. Touch the drop to the
Blood collection area at the
end of the test strip.
7. Do not put control solution
on top of the test strip.
8. When the icon of
meter beeps, you have enough
control solution for the test.
9. The meter starts to count down
from 5 seconds and will show the
results. A result appears on the
display.
10. Don't remove the test strip yet.
Check if the reading falls within the
range printed on the test strip
bottle.
shows, the 11.
Remove the test strip and
throw it away after you
have compared the
reading to the range
printed on the test strip
bottle.
21