Muting Upon The Reception Of A Phone Call; Listening To The Radio; Adjust [Settings] Mode Settings - Kenwood KDC-348U Instruction Manual

Muting upon the reception of a phone call (KDC-X395/ KDC-348U only)
To use this feature, connect the MUTE lead to your telephone using a commercial telephone
accessory. (See "Installation Manual" on a separate volume.)
When a call comes in, "CALL" appears.
■
The audio system pauses.
■
To continue listen to the audio system during a call, press
audio system resumes.
When a call ends, "CALL" disappear.
■
The audio system resumes.

Listening to the Radio

■
Hold for about 2 seconds to memorize the current station or the selected Program
Type. (Refer to [PTY SEARCH] on the table below to select the Program Type.)
■
Press briefly to recall memorized station (or Program Type after entering the PTY
search mode).
Press SRC to select "TUNER".
1
Press BAND repeatedly to select a band
2
(FM1/ FM2/ FM3/ AM).
Press 4 / ¢ to search for a station.
3
Using the remote controller (RC-405)
#FM+ / *AM– : Selects band.
4 / +¢
: Selects station.
1 – 6 : Selects preset station.
Item
Selects the tuning mode for 4 / ¢ buttons.
SEEK MODE
AUTO1 *: Automatically search for a station. ; AUTO2: Search in the order of the stations in the preset memory. ;
MANUAL: Manually search for a station.
AUTO MEMORY YES: Automatically starts memorizing 6 stations with good reception. ; NO *: Cancels (automatic memorizing is
not activated). (Selectable only if [NORMAL] is selected for [PRESET TYPE].) (page 5)
TI ON: The traffic information automatically when the traffic bulletin starts. ; OFF *: Cancels. (Not applicable if "AM"
is selected)
8
English
SRC. "CALL" disappear and the

Adjust [SETTINGS] mode settings

While listening to the radio...
1 Press the volume knob to enter
[FUNCTION] mode.
Turn the volume knob to select
2
[SETTINGS], then press to enter.
Turn the volume knob to make a
3
selection, then press to confirm.
See table below for selection.
Hold to finish the procedure.
4
Selectable setting (Preset: *)