Itunes Tagging; Adjust [Settings] Mode Settings - Kenwood KDC-348U Instruction Manual

■
To cancel the Direct Access Tuning mode,
press .
■
If you make no button operation for 10
seconds, the Direct Access Tuning mode is
automatically canceled.
Using the remote controller (RC-405)
#FM+ / *AM– : Selects band.
4 / +¢
: Selects station.
1 – 6 : Selects preset station.

iTunes Tagging

• Only with optional accessory KTC-HR300 tuner
connected.
Pressing and holding
saves song's information.
Item
Selects the tuning mode for 4 / ¢ buttons.
SEEK MODE
AUTO1 *: Automatically search for a station. ; AUTO2: Search in the order of the stations in the preset memory. ;
MANUAL: Manually search for a station.
AUTO MEMORY YES: Automatically starts memorizing 6 stations with good reception. ; NO *: Cancels (automatic memorizing is
not activated). (Selectable only if [NORM] is selected for [PRESET TYPE].) (page 5)
RECEIVE MODE AUTO *: Automatically tunes to analog broadcast when there is no digital broadcast. ; DIGITAL: Digital broadcasts
only. ; ANALOG: Analog broadcasts only.
TAG MEMORY Only with optional accessory KTC-HR300 connected.
##/50: Displays the tag memory usage of HD Radio receiver. Up to 50 tags can be registered to this unit.
The saved songs will then show up in a
playlist called "Tagged" in iTunes the every
next time you sync your iPod to your
computer. So then you just need to click and
then easily buy and download the song you
were tagging directly from the Apple iTunes
Music Store.

Adjust [SETTINGS] mode settings

While listening to the radio...
1
2
while "TAG" is lit
3
4
Selectable setting (Preset: *)
Press the volume knob to enter
[FUNCTION] mode.
Turn the volume knob to select
[SETTINGS], then press to enter.
Turn the volume knob to make a
selection, then press to confirm.
See table below for selection.
Hold to finish the procedure.
25
English