Kenwood KDC-348U Instruction Manual page 36

Symptom
"HF ERROR 07" appears.
"HF ERROR 68" appears.
"UNKNOWN" appears.
"DEVICE FULL" appears.
"PIN CODE NG" appears.
"CONNECT NG" appears.
"PAIRING NG" appears.
"NO MARCHING" appears.
"TOO SOFT" appears.
"TOO LOUD" appears.
"TOO LONG" appears.
"NO PHONEBOOK" appears.
"NO MESSAGE" appears.
"NO RECORD" appears.
"MEMORY FULL" appears.
"NO VOICE" appears.
The sound from the Bluetooth audio player is
discontinuous.
HD Radio/ SIRIUS/ XM
Symptom
"MEMORY FULL" appears.
"iPod FULL" appears.
"NO TAG FNC" appears.
"TAG ERROR" appears.
"N/A CHANNELS" appears.
"NO ACCESS" appears.
36
English
Remedy/Cause
The memory cannot be accessed. Turn off the power and on again. If this message still
appears, press the reset button on the control unit.
The unit cannot communicate with the cell-phone. Turn off the power and on again. If
this message still appears, press the reset button on the control unit.
The Bluetooth device cannot be detected.
5 Bluetooth device have already been registered. No more Bluetooth device cannot
be registered.
The PIN code is wrong.
The unit cannot be connected to the device.
Pairing error.
The voice tag is wrong. Voice cannot be recognized because of an unregistered voice
tag, etc.
Voice is too small and cannot be recognized.
Voice is too large to be recognized.
The word or utterance is too long to be recognized.
Data is not contained in the phone book.
No short message in In Box.
The voice tag is not registered in the phone book.
The number of voice tags reaches the maximum number to be registered in the phone
book.
No call.
■
Another Bluetooth device is affecting the Bluetooth communication. Turn off
another Bluetooth device. Move another Bluetooth device away from this unit.
■
Another Bluetooth device or profile is used for communication. The downloading of
the Phone book or the SMS disconnects the sound.
Remedy/Cause
The tag memory of HD Radio receiver is FULL.
The iPod memory is FULL.
iPod which does not support the tag memory is connected.
The procedure is not registered to TAG Memory function
No receivable channel and category.
The procedure preset with mixed preset memory function cannot be available. The
preset content may not be recalled depending on the selected band or source.