Subscribe to Our Youtube Channel
Related Manuals for Philips 43PUS7000
Summary of Contents for Philips 43PUS7000
- Page 1 Television 7000 Series User Manual 43PUS7000 50PUS7000 55PUS7000 65PUS7000 75PUS7000 Register your product and get support at www.philips.com/TVsupport...
-
Page 2: Table Of Contents
Content 9.1 From a USB Connection 1 Home Screen Overview 9.2 From a Computer or NAS 9.3 Photos 2 Get Support 9.4 Videos 2.1 Identify and Register your TV 9.5 Music 2.2 TV Help and User Manual 2.3 TV Diagnose and Self-diagnose 10 Open TV Setting Menus 2.4 Consumer Care / Repair 10.1 Quick Menu and Frequent Settings... - Page 3 20.5 Sound 20.6 Multimedia 20.7 Connectivity 21 Troubleshooting 21.1 Tips 21.2 Switch On 21.3 Remote Control 21.4 Channels 21.5 Satellite 21.6 Picture 21.7 Sound 21.8 HDMI - UHD 21.9 USB 21.10 Wi-Fi and Internet 21.11 Wrong Menu Language 22 Safety and Care 22.1 Safety 22.2 Screen Care 23 Terms of Use...
-
Page 4: Home Screen Overview
You can access All Settings menu via the icon at the top right corner. You can also find the Frequent settings and Quick menu with common settings in the Philips TV Menu, which can be invoked directly from the remote control. -
Page 5: Get Support
- Connect external devices participate in special surveys about new releases. - Network - TV tuner Go to www.philips.com/TVsupport - Clear cache memory - Apps 4 - Select OK to close the result page and go back to TV diagnose wizard. - Page 6 Find the telephone number in the printed documentation that came with the TV. Or consult our website www.philips.com/TVsupport and select your country if needed. TV model number and serial number You might be asked to provide the TV product model number and serial number.
-
Page 7: Quick Guide
3. Quick Guide Middle 3.1. Remote Control Key Overview The feature of Hidden keys Hidden keys will be appeared to extend more control functions while pressing the 123 key. The 123 key is on middle of remote control, which is used to turn on/off hidden keys mode. -
Page 8: Ir Sensor
is pressed. Press the quick key to launch app or streaming media directly. The actual quick keys are varied between 12 - Home regions or countries. To open the Home menu. 13 - (Channel) Move down or up to switch to the next or previous channel in the channel list. - Page 9 For more information, check on Help > User manual > End of use. Cleaning Your remote control is treated with a scratch-resistant coating. To clean the remote control, use a soft damp cloth. Never use substances such as alcohol, chemicals or household cleaners on the remote control.
-
Page 10: Setting Up
To read the instructions, check on Help > User manual > Safety and Care. 4.2. TV Placement Tips on Placement • 43PUS7000 200x100, M6 (min.: 9 mm, max: 10 mm) • Position the TV where light does not shine directly on • 50PUS7000 the screen. - Page 11 Although this TV has a very low standby power consumption, unplug the power cable to save energy if you do not use the TV for a long period of time. On or Standby Before you switch on the TV, make sure you plugged in the mains power in the POWER connector on the back of the TV.
-
Page 12: Connections
5. Connections 5.1. Connectivity guide Always connect a device to the TV with the highest quality connection available. Also, use good quality cables to ensure a good transfer of picture and sound. When you connect a device, the TV recognizes its type and gives each device a correct type name. -
Page 13: Mobile Device
TV screen. Scan the QR code with your mobile device and follow the instruction to download and install the Philips Smart TV app. When using the app, your mobile device and Philips TV need to connect to the same Wi-Fi network. -
Page 14: Other Device
Smart Card Digital TV operators provide a CI+ module (Conditional Access Module - CAM) and an accompanying smart card, when you subscribe to their premium programmes. Insert the smart card into the CAM module. See the instruction you received from the operator. To insert the CAM in the TV…... -
Page 15: Bluetooth
USB Storage Device Pairing a Device You can view photos or play your music and videos Position the wireless speaker within a distance of 5 from a connected USB flash drive. Insert a USB flash meters from the TV. Read the user manual of the device drive in one of the USB connections on the TV while the for specific information on pairing and on wireless TV is switched on. -
Page 16: Computer
(limited RGB) shall be set in computer graphic card. To pair a Philips easy-pair headphones with the TV: 1 - Put the Philips easy-pair headphones into pairing mode, and place it within a distance of 5 metres from the TV. -
Page 17: Switch Source
6. Switch Source 6.1. Source List • To open the sources menu, press SOURCES. • To switch to a connected device, select the device with the Arrow / navigation keys and press OK. • To view the technical information of the connected device you are watching, press OPTIONS and select Device info. -
Page 18: Channels
7. Channels 2 - Press OK to search channels. This can take a few minutes. Quick reinstall (Home) > Settings > Channels > Antenna/Cable 7.1. About Channels and installation* > Search for channels 1 - Select Quick reinstall or Channel reinstall (if country Switch Channels setting is UK) to install all channels again with default settings. - Page 19 If this results in having no channels installed or if some Channel Update Message channels are missing, you can search in smaller steps of 1MHz. Using the 1MHz steps will take more time to (Home) > Settings > Channels > Antenna/Cable search for and install channels.
- Page 20 You can redo these steps until you have found all Alternatively, you can start a channel update yourself. available analogue TV channels. Automatic channel update Once a day, at 6 AM, the TV updates the channels and stores new channels. New channels are stored in the All Satellite channels list but also in the New channels list.
-
Page 21: Channel List Copy
With Channel list copy/Satellite list copy, you can copy To Installed TVs the channels installed on one TV onto another Philips TV of the same range. You can avoid the time- Depending on whether your TV is already installed or... -
Page 22: Channel Options
* Note: HD+ OpApp is only available for HD+ subscriber and the country setting is Germany. You need internet connection and accept the Philips Terms of Use, the Privacy Policy and Smart TV Terms of Use to install the Freely app. You can install the app... - Page 23 If language information is part of the digital broadcast 1 - Tune to the channel. and the broadcasted programme is not in your 2 - Press OPTIONS, select Channel info and press OK to language (the language set on TV), the TV can show open the channel info.
-
Page 24: Channel List
cache from HbbTV services on or off. market share above 3%. * Note: The listed by genre function is only apply to Germany. (Home) > Settings > Channels > HbbTV settings > HbbTV Device ID reset Channel List Options You can reset your TV unique device identifier. -
Page 25: Favourite Channels
Create a Favourites List Select Channel List TV / EXIT > OK > OPTIONS > Select channel list 1 - While watching a TV channel, press Channel list to open the channel list. Select one of channel lists that sorted by different kinds 2 - Select the channel, and press Mark as of channels. -
Page 26: Text / Teletext
you know"-channel provides useful tips to improve the Text Options way you use your TV. In Text/Teletext, press OPTIONS to select the following… • Freeze page / Unfreeze page 7.5. Text / Teletext To stop the automatic rotation of subpages. •... - Page 27 Watch Streaming channels Your TV must be connected to a home network with an Internet connection. You will need to accept the Streaming channels Terms of Use and Privacy Policy. To install and watch Streaming channels: 1 - Press the SOURCES key on the remote control to open the Sources menu.
-
Page 28: Tv Guide
8. TV Guide Update TV Guide You can update the TV guide to get the latest programmes information. 8.1. What You Need To update the TV guide, press OPTIONS and select Update TV guide. It may take few minutes to complete the update. -
Page 29: Videos, Photos And Music
9. Videos, Photos and View Photos Music 1 - Press SOURCES, select USB and press OK. 2 - Select USB Flash Drive and then select the USB device you need. 3 - Select one of photos, and press OK to view the 9.1. -
Page 30: Video Options
9.4. Videos During the video playback, press OPTIONS to get more options. Subtitle settings Set the Font size, Subtitle colour, Subtitle position and Play Videos Time sync offset if the options are available. To play a video on TV: Info Show video file information. -
Page 31: Open Tv Setting Menus
10. Open TV Setting • Update software — Check for TV software update. You can press Customise to enable or disable the Menus items from the list of Frequent settings. All settings menu: 10.1. Quick Menu and Press (Home) key on the remote control will go back to the Home screen. - Page 32 • Home Cinema - Ideal for daily movie home Backlight Contrast entertainment experience. • ECO - Most energy conscious setting (Home) > Settings > Picture > Contrast > Brightness • Movie - Ideal for watching movies with original studio >...
- Page 33 HDR Control Sharpness HDR Effect Settings Enhancement (Home) > Settings > Picture > Sharpness > (Home) > Settings > Picture > Contrast > HDR control Enhancement. > HDR10/ HDR10+ effect / HLG effect. To adjust the sharpness value of the picture. You can adjust the HDR effect level to Off, More details, Balanced or More brightness for the HDR contents.
-
Page 34: Screen Settings
Screen Settings IntelliSound Engine IntelliSound Engine comprises of various impactful Picture Format audio processing technologies that capture the essence of sound and how it enhances the total sound (Home) > Settings > Screen > Picture format experience. You can select from three IntelliSound If the picture is not filling the whole screen, if black bars engine modes. - Page 35 (Home) > Settings > Sound > Custom settings > Spatial effect Immersive level (Home) > Settings > Sound > Custom settings > Set the amount of Immersive effect, only available Spatial effect when Dolby Atmos is set to On or Auto. Adjust the amount of spatializer effect, only available when Music Mode is set to Spatial.
- Page 36 Reset all to default (Home) > Settings > Sound > Custom settings > Reset Reset all to default all to default. (Home) > Settings > Sound > Custom settings > Reset Reset all of Personal settings back to the original factory all to default.
- Page 37 • Surround AI - Optimum surround effect using AI (Home) > Settings > Sound > EasyLink 2.0 > DTS analysis. TruVolume. * Some of Easylink 2.0 HDMI sound system only Select consistent volume level. supports Surround Mode to switch on or off virtual surround.
- Page 38 The Delta volume setting can be used to adjust to Digital out format balance the sound level difference between the TV (Home) > Settings > Sound > Advanced > Digital out channel and the HDMI source input. Press the Arrow / format navigation keys to adjust the delta value for TV speaker volume.
-
Page 39: Wireless And Networks
Hearing profile settings Home Network (Home) > Settings > Sound > Hearing profile. To enjoy the full capabilities of your Philips Smart TV, your TV must be connected to the Internet. Personalise your TV speakers sound Connect the TV to a home network with a high-speed Hearing profile setting is for creating a personal profile Internet connection. - Page 40 high-speed (broadband) connection to the Internet. Static IP Configuration (Home) > Settings > Wireless & networks > Wired or Wi-Fi > Static IP configuration 1 - Select Static IP configuration and configure the connection. 2 - You can set the number for IP Address, Netmask, Gateway, DNS 1, or DNS 2.
-
Page 41: General Settings
TV earlier or reset the time during the countdown. Control4® is the provider of personalised automation and control solutions, helping to control multiple devices in your home. To join your Philips Smart TV to Control4®, please make sure your Control4® Set TV switch off timer environment and devices are properly set. - Page 42 sure AirPlay is turned On. Your Apple device must be connected to the same Wi-Fi home network as your TV Set timer to switch off automatically when TV has no to stream contents. signal (Home) > Settings > General settings > Power and energy >...
- Page 43 setup > Picture and audio to Optimal, or Optimal (Auto Game) / Optimal (Auto Game 120Hz Pro). Select Optimised to shop or Custom settings for picture and audio settings. Select Standard if the picture or sound are distorted. • Set Optimal (Auto Game) / Optimal (Auto Game 120Hz Pro) to enable TV to support the HDMI Variable Logos and banner Refresh Rate video.
-
Page 44: Universal Access Settings
(Home) > Apps > Demo me > Manage people. demos > Configuration • Switched on, the TV automatically switches to the Set the TV to Main TV or Sub TV. adapted audio and subtitles, if available. Download new demo file ... -
Page 45: Region And Language Settings
Philips apps. - Coordinated Universal Time information. • If the clock is not correct, you can set the TV clock to Country dependent. • When select Country dependent, you can set the time Region and Language Settings for Automatic, Standard time, or Daylight saving time. - Page 46 Set TV switch off timer MENU > Eco settings > Switch off timer Set the Switch off timer, the TV switches off automatically to save energy. The setting value Off deactivates the automatic switch off. • TV switches off if receiving a TV signal but you don't press a key on the remote control during a 4 hour period.
-
Page 47: Game Bar
11. Game Bar press OK can turn on the green light on icon and enable the tool. Press OK again will disable the tool. Move down to select under the icon can enter the setting options for the Game tool. Crosshair: enable/disable to show the dial point. -
Page 48: Smart Tv And Apps
You can sort the Apps in Apps by different categories like New, Video, Entertainment, News or Lifestyle. Featured Apps In this area, Philips presents a range of recommended Apps for you. You can select and install them to enrich your Smart TV life. -
Page 49: Netflix
13. Netflix If you have a Netflix membership subscription, you can enjoy Netflix on this TV. Your TV must be connected to the Internet. To open Netflix, press to open the Netflix App. You can open Netflix immediately from a TV in standby. www.netflix.com... -
Page 50: Amazon Prime Video
14. Amazon Prime Video With an Amazon prime membership, you gain access to thousands of popular movies and TV show, including exclusive Prime Originals. Press the key to open the Amazon Prime Video app. Your TV must be connected to the Internet to use the app. -
Page 51: Youtube
15. YouTube YouTube provides a platform to connect to the world. Watch and discover popular videos that uploaded by YouTube users around the world. Use the YouTube app to explore the latest topics on music, news, and more. Press the app icon to open the YouTube app. Your TV must be connected to the Internet to use the app. -
Page 52: Alexa
Note: The supported Ambilight voice commands may To use Alexa, you need to first setup the Alexa client depend on specific TV models. service on your Philips Smart TV. Start the setup by launching the "Amazon Alexa" app from the Home LAUNCH APPLICATIONS OR SHORTCUTS** screen of your TV. -
Page 53: Google Assistant
TV with voice commands. 5 - On Google Home app, select “Set up device”, then select 'Works with Google' and search for Philips Smart TV. Sign in to link to your Google account and enable TV control on Google Home app. -
Page 54: Software
18. Software on again. Please wait. Do not . . . • use the remote control • remove the USB memory device from the TV 18.1. Update Software • press twice • press the power switch on the TV The TV switches itself off (for 10 seconds) and then back on again. - Page 55 18.4. View Software Update History (Home) > Settings > Update software > View software update history Display the list of software versions that are successfully update on the TV.
-
Page 56: Environmental
Please act according to your local rules and do not You can also find the power consumption values for dispose of your old products with your normal this product on the Philips website for your country household waste. Correct disposal of your old product www.philips.com/TVsupport helps to prevent potential negative consequences for the environment and human health. -
Page 57: Specifications
Product specifications are subject to change without Video Inputs - Max frame rate is 60Hz (TV can be in notice. For more specification details of this product, Video/Game/Computer mode) www.philips.com/TVsupport • 640 x 480 - 60Hz • 576p - 50Hz Power •... -
Page 58: Multimedia
• HDMI 3 input - UHD - HDR • HDMI 2 input - UHD - HDR 20.6. Multimedia • HDMI 1 input - ARC/eARC - UHD - HDR • Antenna (75 ohm) • Satellite tuner • USB 1 - USB 2.0 Connections •... -
Page 59: Troubleshooting
The TV goes back to standby after showing the Philips startup screen When the TV is in standby, a Philips startup screen is 21.1. Tips displayed, then the TV returns to standby mode. This is normal behaviour. When the TV is disconnected and reconnected to the power supply, the startup screen is displayed at the next startup. -
Page 60: Satellite
Press Quick Menu > Help > TV diagnose > Check the The TV cannot find the satellites I want or the TV TV. If the video clip stays black, call Philips. Wait until the clip ends and select Contact info in the Help menu. -
Page 61: Sound
input signal might be poor. A weak digital signal is seen as a picture that is breaking up in square blocks and 21.7. Sound freezes occasionally. Much sooner than a bad analogue signal, a bad digital signal will fall away. •... -
Page 62: Usb
• Check if your HDMI devices are HDMI-CEC compatible. EasyLink features only work with devices that are HDMI- 21.11. Wrong Menu CEC compatible. Language HDMI eARC is not working well • Make sure the HDMI cable is connected to HDMI 1. •... -
Page 63: Safety And Care
• ALWAYS use cabinets or stands or mounting methods from the power outlet immediately. recommended by the manufacturer of the television Contact Philips TV Consumer Care to have the TV set. checked before use. • ALWAYS use furniture that can safely support the •... -
Page 64: Lightning Storms
placed inside any part of the body, seek immediate The condensation moisture will not harm the TV or medical attention. cause malfunction. • Risk of fire or explosion if the battery is replaced by an incorrect type. • Replacement of a battery with an incorrect type that can defeat a safeguard (for example, in the case of 22.2. -
Page 65: Terms Of Use
Backlight characteristics All Philips TV have gone through stringent tests and checks before shipping to you. You can be rest assured 2025 © TP Vision Europe B.V. All rights reserved. -
Page 66: Copyrights
24. Copyrights 24.4. Dolby ATMOS 24.1. HDMI Dolby, Dolby ATMOS, and the double-D symbol are registered trademarks of Dolby Laboratories Licensing Corporation. Manufactured under license from Dolby Laboratories. The terms HDMI, HDMI High-Definition Multimedia Confidential unpublished works. Copyright © Interface, HDMI trade dress and the HDMI Logos are 2012–2024 Dolby Laboratories. -
Page 67: Open Source
25. Open Source regardless of the platform on which their software is built, relieving them of the need to code special-case conditions to work around or take 25.1. Open Source Software advantage of platform-specific deficiencies or features. Source: https://github.com/apache/apr bind ( 9.11.36) This television contains open source software. - Page 68 provides a bus daemon that does things like: features: - notify applications when other apps exit Efficient support for all types of audio interfaces, from - start services on demand consumer sound cards to professional multichannel - support single-instance applications audio interfaces.
- Page 69 terms and conditions of the libpng license, which can The Linux kernel is a mostly free and open-source,[11] be found below. monolithic, modular, multitasking, Unix-like operating Source: http://sourceforge.net/projects/libpng/files/ system kernel. It was originally authored in 1991 by Linus Torvalds for his i386-based PC, and it was soon libffi (3.2.1) adopted as the kernel for the GNU operating system, Compilers for high level languages generate code that...
- Page 70 syntax and semantics as Perl 5. PCRE has its own native API, as well as a set of wrapper functions that correspond to the POSIX regular expression API. The PCRE library is free, even for building proprietary software. https://www.pcre.org/ procps (ps, top) (3.3.15) procps is the package that has a bunch of small useful utilities that give information about processes using the /proc filesystem.
-
Page 71: Disclaimer Regarding Services And/Or Software Offered By Third Parties
26. Disclaimer regarding services and/or software offered by third parties Services and/or software offered by third parties may be changed, suspended, or terminated without prior notice. TP Vision does not bear any responsibility in these sorts of situations. -
Page 72: Index
Index EasyLink 2.0 Eco Settings Advanced Sound Settings End of Use Alexa Equaliser Ambient Light Level Optimisation European Eco-label App lock Apple AirPlay and HomeKit Audio Language Favourite Channel, Channel Range Audio Out Menu Favourite Channel, Create Auto Clock Mode Favourite Channel, Edit Auto movie mode Favourite Channels... - Page 73 Philips easy-pair TV Placement Philips Smart TV App TV Speaker Photos, Videos and Music Picture Contrast Menu Universal Access Picture Contrast Mode Universal Access, Audio Description Picture Format Universal Access, Audio Effects Picture Noise, Artefact Reduction Universal Access, Hearing Impaired...
Need help?
Do you have a question about the 43PUS7000 and is the answer not in the manual?
Questions and answers