Table of Contents
Advertisement
– Each time a Disc locked disc is played, it will be added to
the top of the list. When the list is full (120), the last disc
in the list will be replaced when a new disc is added.
– Double-sided DVDs and multi-volume VCDs may have a
different ID for each side. In order to make Disc Locks to
such discs, each side must be authorized.
Deauthorizing discs
If you authorize a disc for [Play always], the disc content
will always be available for playback — until you
deauthorize the disc. Follow the procedure below to
deauthorize a disc.
1 Insert the disc.
➜ Playback starts automatically.
2 Press STOP within about 10 seconds after
the screen.
➜
will appear on the screen, indicating that the disc is
now locked.
Parental Control
DVD movies may contain scenes that are unsuitable for
children. Therefore, discs may contain Parental Control
information that may apply to the entire disc or to certain
scenes. These scenes are rated from 1 through 8.
Alternative, more suitable scenes may be available on the
disc. Ratings are country-specific. The Parental Control
feature enables you to prevent discs from being played by
your children or, in some cases, to substitute alternative
scenes.
Activating/deactivating Parental
Control
1 When the disc playback is stopped, press ON SCREEN
on the remote control.
➜ The On-screen menu appears.
2 Go to [Enter PIN] (Setup ➔ Access ➔ Enter PIN) by
using the v w t u buttons, then press the u button.
3 Enter your four-digit PIN.
4 Press the v w button to select [Parental level], then press
the u button.
5 Press the t u button to select a rating from 1 through 8
for the disc.
Rating 0:
Parental Control is not active. The disc plays in full.
Ratings 1 to 8:
If you set a rating for the player, all scenes with the same
rating or lower will be played. Higher rated scenes will
not be played unless an alternative that has the same
rating or lower is available on the disc. If no suitable
alternative is available, playback will stop and the four-
digit code will be required to proceed.
6 Press the ENTER/OK button, then press the ON
SCREEN button to exit the On-screen menu.
1 When the disc playback is stopped, press ON SCREEN
2 Go to [Enter PIN] (Setup ➔ Access ➔ Enter PIN) by
3 Enter your four-digit PIN.
4 Press the v w button to select [Country], then press the
5 Select a country using the v w button.
6 Press the ENTER/OK button to confirm your selection
appears in
1 When the disc playback is stopped, press ON SCREEN
DVD-A
DVD-V
2 Go to [Enter PIN] (Setup ➔ Access ➔ Enter PIN) by
3 Press the w button to highlight [Change PIN], then press
4 Enter the current four-digit PIN again, then enter a new
5 Enter the new PIN a second time.
6 Press the ON SCREEN button to exit the menu.
1 Press / OPEN/CLOSE to remove the disc, then press /
2 Press ON SCREEN on the remote control
3 Go to [Enter PIN] (Setup ➔ Access ➔ Enter PIN) by
4 Press the 9 button for four times.
5 Enter your new four-digit PIN
Country
You can apply a rating system associated with a specific
country to the Parental Level control.
on the remote control
➜ The On-screen menu appears.
using the v w t u buttons, then press the u button.
u button.
and exit.
Changing the four-digit PIN
on the remote control
➜ The On-screen menu appears.
using the v w t u buttons, then press theu button.
the u button.
four-digit PIN.
➜ The new four-digit code is in effect.
If you forget your four-digit code
OPEN/CLOSE again to close the tray.
➜ The On-screen menu appears.
using the v w t u buttons, then press the u button.
➜ "Enter New PIN" appears on screen.
Note:
– The factory default PIN is 0000.
Operation
25
Advertisement
Table of Contents
