Parking Brake Inhibit - Jensen VM9224BT Operating Instructions Manual

Picture Adjustment
To adjust monitor display settings, perform the floowing steps:
1. Press and hold the NAV button (5) to access the "BRIGHT" setting. Press
and hold twice to access the "CONTRAST" setting.
2. Turn the rotary encoder to adjust the setting level.
3. Press and hold the NAV button (5) again to exit the picture adjustment
menu.

Parking Brake Inhibit

When the pink "Parking" wire is connected to the vehicle Parking Brake circuit,
the front TFT monitor will display video when the Parking Brake is engaged.
(When the pink wire is grounded via the Parking Brake circuit, video will be
displayed.)
10
VM9224BT