iDataLink maestro RR Install Manual
  1. Manuals
  2. Brands
  3. iDataLink Manuals
  4. Automobile Accessories
  5. maestro Rr
  6. Install manual
iDataLink maestro RR Install Manual

iDataLink maestro RR Install Manual

Ford edge with 4.3" screen installing double-din radio
Hide thumbs Also See for maestro RR:
Table of Contents

Advertisement

Quick Links

Download this manual
SELECT VEHICLE
PRINT PAGES NEEDED
HOW TO USE THIS INSTALL GUIDE
1
Open the Bookmarks menu and find your vehicle OR scroll
down until you find the install guide for your vehicle.
2
Print only the pages for your vehicle using the advanced
options in the Print menu.
3
Install your Maestro RR according to the guide for your vehicle.
Pressing the printer icon or "quick printing" this document will print
NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in
are the properties of their respective owners.
WARNING
all of the guides in this compilation.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the maestro RR and is the answer not in the manual?

Questions and answers

Related Manuals for iDataLink maestro RR

Summary of Contents for iDataLink maestro RR

  • Page 1 Print only the pages for your vehicle using the advanced options in the Print menu. Install your Maestro RR according to the guide for your vehicle. WARNING Pressing the printer icon or “quick printing” this document will print all of the guides in this compilation.

  • Page 2: Install Guide

    PRODUCTS REQUIRED PROGRAMMED FIRMWARE: FO2C-RR-DS iDatalink Maestro RR or RR2 Radio Replacement Interface iDatalink Maestro EDG1 Dash Kit NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners.

  • Page 3: Need Help

    Ford EdgE with 4.3" scrEEn installing doublE-din radio 2011-2014 WELCOME ADDITIONAL INFORMATION AND ACCESSORIES Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are HEAD UNIT ADAPTER: now a few simple steps away from ACC-HU-PIO1, SON1, KEN1, KEN2, ALP1 enjoying your new car radio with enhanced features.

  • Page 4: Installation Instructions

    10. Release the four clips at the top of the bezel to remove the Fig. 1.7 Fig. 1.8 vents. (Fig. 1.10) Set vents and screws aside for use when reassembling the EDG1 kit. Fig. 1.9 Fig. 1.10 Automotive Data Solutions Inc. © 2023 FO2C-RR-DS-(HRR-EDG1)-EN maestro.idatalink.com...
  • Page 5 7mm screws removed earlier. (Fig. 2.2) 3. Place the metal brackets onto the radio and secure using the hardware included with the radio. (Fig. 2.3) Fig. 2.1 Fig. 2.2 Fig. 2.3 Automotive Data Solutions Inc. © 2023 FO2C-RR-DS-(HRR-EDG1)-EN maestro.idatalink.com...

  • Page 6: Make Connections

    (Pioneer) or I/F input. Connect the black 4-pin data cable last. • Route the supplied USB cables through the factory USB location to the radio cavity. Snap the USB mounting plate into the center console and secure the wiring. Automotive Data Solutions Inc. © 2023 FO2C-RR-DS-(HRR-EDG1)-EN maestro.idatalink.com...

  • Page 7: Wiring Diagram

    ANTENNA ADAPTER FACTORY USB LOCATION CENTER CONSOLE WIRES FROM VEHICLE BACKUP CAM STEP 3 OBDII CONNECTOR STEP 4 MAESTRO RR MODULE STEP 8 FACTORY CLIMATE CONTROLS HARNESS AMP TURNON AMP TURNON HRR-EDG1 T-HARNESS NOT REQUIRED STEERING WHEEL CONTROL CABLE Automotive Data Solutions Inc. © 2023 FO2C-RR-DS-(HRR-EDG1)-EN maestro.idatalink.com...

  • Page 8: Radio Wire Reference Chart

    Wire Color on Adapter Kenwood Radio Wire Description E-Brake LtGreen LtGreen Reverse Light* Purple/White Purple/White Steering Wheel Controls (DATA) Blue/Yellow * Reverse light wire: Only connect to radio or module damage will occur. Automotive Data Solutions Inc. © 2023 FO2C-RR-DS-(HRR-EDG1)-EN maestro.idatalink.com...

  • Page 9: Module Diagnostics

    Problem detected. Consult troubleshooting table. • 1 GREEN flash After radio boots up : Normal operation. • 3 GREEN flashes Bluetooth is activated. Turns off after one minute: Normal operation. • • Normal operation (inactive). Automotive Data Solutions Inc. © 2023 FO2C-RR-DS-(HRR-EDG1)-EN maestro.idatalink.com...

  • Page 10: Troubleshooting Table

    The light on the Maestro is blinking RED TWICE and the radio IS turning on. Ensure the 4-pin data cable is connected between the radio and the RR, and that it is plugged into the black port on the Maestro RR. The red and blue ports on the RR should be empty.
  • Page 11 PRODUCTS REQUIRED PROGRAMMED FIRMWARE: FO2C-RR-DS iDatalink Maestro RR or RR2 Radio Replacement Interface iDatalink Maestro EDG1 Dash Kit NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners.
  • Page 12 Ford EdgE with 4.3" scrEEn installing modular 8" or 9" radio 2011-2014 WELCOME ADDITIONAL INFORMATION AND ACCESSORIES Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are HEAD UNIT ADAPTER: now a few simple steps away from ACC-HU-PIO1, SON1, KEN1, KEN2, ALP1 enjoying your new car radio with enhanced features.
  • Page 13 10. Release the four clips at the top of the bezel to remove the Fig. 1.7 Fig. 1.8 vents. (Fig. 1.10) Set vents and screws aside for use when reassembling the EDG1 kit. Fig. 1.9 Fig. 1.10 Automotive Data Solutions Inc. © 2023 FO2C-RR-DS-(HRR-EDG1)-EN maestro.idatalink.com...
  • Page 14 7mm screws removed earlier. (Fig. 2.2) 3. Place the metal brackets onto the radio and secure using the hardware included with the radio. (Fig. 2.3) Fig. 2.1 Fig. 2.2 Fig. 2.3 Automotive Data Solutions Inc. © 2023 FO2C-RR-DS-(HRR-EDG1)-EN maestro.idatalink.com...
  • Page 15 (Pioneer) or I/F input. Connect the black 4-pin data cable last. • Route the supplied USB cables through the factory USB location to the radio cavity. Snap the USB mounting plate into the center console and secure the wiring. Automotive Data Solutions Inc. © 2023 FO2C-RR-DS-(HRR-EDG1)-EN maestro.idatalink.com...
  • Page 16 ANTENNA ADAPTER FACTORY USB LOCATION CENTER CONSOLE WIRES FROM VEHICLE BACKUP CAM STEP 3 OBDII CONNECTOR STEP 4 MAESTRO RR MODULE STEP 8 FACTORY CLIMATE CONTROLS HARNESS AMP TURNON AMP TURNON HRR-EDG1 T-HARNESS NOT REQUIRED STEERING WHEEL CONTROL CABLE Automotive Data Solutions Inc. © 2023 FO2C-RR-DS-(HRR-EDG1)-EN maestro.idatalink.com...
  • Page 17 Wire Color on Adapter Kenwood Radio Wire Description E-Brake LtGreen LtGreen Reverse Light* Purple/White Purple/White Steering Wheel Controls (DATA) Blue/Yellow * Reverse light wire: Only connect to radio or module damage will occur. Automotive Data Solutions Inc. © 2023 FO2C-RR-DS-(HRR-EDG1)-EN maestro.idatalink.com...
  • Page 18 Problem detected. Consult troubleshooting table. • 1 GREEN flash After radio boots up : Normal operation. • 3 GREEN flashes Bluetooth is activated. Turns off after one minute: Normal operation. • • Normal operation (inactive). Automotive Data Solutions Inc. © 2023 FO2C-RR-DS-(HRR-EDG1)-EN maestro.idatalink.com...
  • Page 19 The light on the Maestro is blinking RED TWICE and the radio IS turning on. Ensure the 4-pin data cable is connected between the radio and the RR, and that it is plugged into the black port on the Maestro RR. The red and blue ports on the RR should be empty.

Table of Contents