iDataLink maestro Rr Install Manual
  1. Manuals
  2. Brands
  3. iDataLink Manuals
  4. Automobile Accessories
  5. maestro Rr
  6. Install manual

iDataLink maestro Rr Install Manual

2008-2015 audi r8
Hide thumbs Also See for maestro Rr:
Table of Contents

Advertisement

Quick Links

Download this manual
SELECT VEHICLE
PRINT PAGES NEEDED
HOW TO USE THIS INSTALL GUIDE
1
Open the Bookmarks menu and find your vehicle OR scroll
down until you find the install guide for your vehicle.
2
Print only the pages for your vehicle using the advanced
options in the Print menu.
3
Install your Maestro RR according to the guide for your vehicle.
Pressing the printer icon or "quick printing" this document will print
NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certifi ed technician. Logos and trademarks used here in
are the properties of their respective owners.
WARNING
all of the guides in this compilation.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the maestro Rr and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for iDataLink maestro Rr

Summary of Contents for iDataLink maestro Rr

  • Page 1 Print only the pages for your vehicle using the advanced options in the Print menu. Install your Maestro RR according to the guide for your vehicle. WARNING Pressing the printer icon or “quick printing” this document will print all of the guides in this compilation.

  • Page 2: Install Guide

    PRODUCTS REQUIRED PROGRAMMED FIRMWARE: ADS-RR(SR)-AUD1-DS iDatalink Maestro RR or RR2 Radio Replacement Interface iDatalink Maestro R8 Dash Kit NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners.

  • Page 3: Need Help

    Audi R8 2008-2015 WELCOME ACCESSORIES AND ADDITIONAL INFORMATION Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are now a few simple steps away from OPTIONAL ACCESSORIES enjoying your new car radio with enhanced features. Click here for:...

  • Page 4: Installation Instructions

    4. Route the OBD2 harness to the OBD2 connector located above the gas and brake pedals. 5. Connect all the harnesses to the Maestro RR module. 6. Plug the harnesses into the aftermarket radio. • Plug the backup camera RCA cable, the antenna adapter, USB cables, microphone and the 4-pin Data cable.

  • Page 5: Wiring Diagram

    WIRES HARNESS FROM VEHICLE ANTENNA ANTENNA ANTENNA ADAPTER BUTTON BAR STEP 4 OBDII CONNECTOR STEP 5 MAESTRO RR MODULE AMP TURNON AMP TURNON HRR-R8 T-HARNESS NOT REQUIRED STEERING WHEEL CONTROL CABLE AUDIO CABLE Automotive Data Solutions Inc. © 2023 ADS-HRR(SR)-R8-DS-IG-EN...

  • Page 6: Radio Wire Reference Chart

    Wire Color on Adapter Kenwood Radio Wire Description E-Brake LtGreen LtGreen Reverse Light* Purple/White Purple/White Steering Wheel Controls (DATA) Blue/Yellow * Reverse light wire: Only connect to radio or module damage will occur. Automotive Data Solutions Inc. © 2023 ADS-HRR(SR)-R8-DS-IG-EN maestro.idatalink.com...

  • Page 7: Module Diagnostics

    Problem detected. Consult troubleshooting table. • 1 GREEN flash After radio boots up : Normal operation. • 3 GREEN flashes Bluetooth is activated. Turns off after one minute: Normal operation. • • Normal operation (inactive). Automotive Data Solutions Inc. © 2023 ADS-HRR(SR)-R8-DS-IG-EN maestro.idatalink.com...

  • Page 8: Troubleshooting Table

    Ensure the 4-pin data cable is connected between the radio and the RR, and that it is turning on. plugged into the black port on the Maestro RR. The red and blue ports on the RR should be empty. Make sure the correct radio model and serial number were entered during the fl ash.

Table of Contents