GE Profile PHP6030 Owner's Manual page 11

Cookware for Induction Cooktop (Cont.)
Using the correct size cookware
the induction surface units
indicator for that surface units location will flash for 25
centered on the induction coil, the power for the surface
unit will be shut off within 30 seconds.
Cookware larger than the surface unit ring may be used;
however, heat will only occur above the surface unit.
with the glass surface.
the surrounding metal cooktop trim.
For best performance, match the pan size to the surface
generate less power at any given setting.
For more recommended cookware and additional
troubleshooting tips, check out self-help videos and FAQ
at GEAppliances.com/support.
Cookware "Noise"
Slight sounds may be produced by different types
of cookware. Heavier pans such as enameled cast
iron produce less noise than a lighter weight multi-ply
stainless steel pan. The size of the pan, and the amount
of contents, can also contribute to the sound level.
When using adjacent surface units that are set at certain
power level settings, magnetic fields may interact and
produce a low whistle or intermittent "hum". These noises
can be reduced or eliminated by lowering or raising the
power level settings of one or both of the surface units.
produce less noise.
Power Control
period of time or if multiple surface units are on, there
may be a slight reduction in power to the surface unit.
49-2003299 Rev. 1
surface unit ring will
On 1 9 Power
Off Boost
30" Cooktop
Sync
Lock On 1 9 Power
Controls Off Boost
Hold 3 Sec
On Power
1 9
Off Boost
Sync
Lock On 1 9 36" Cooktop Power
Controls Off Boost
Hold 3 Sec
for each surface unit
A low "humming" noise is normal particularly on high
settings.
when cooking with Hi mode. This is normal. The sound
depends on the type of pot being used. Some pots will
may be heard if the pan contents are cold. As the pan
reduced, the sound level will go down.
Water under pans may also cause the controls to reduce
the power delivered to the cookware.
Induction
MIN
Set Off
Timer
On 1 9 Power On 1 9 Power
Off Boost Off Boost
Induction
MIN
On Power
Set Off 1 9
Off Boost
Timer
On 1 9 Power On 1 9 Power
Off Boost Off Boost
11