Computer Setup-Main - HP dx2300 - Microtower PC Utility Manual

Computer Setup—Main
NOTE:
configuration.
Table 3 Computer Setup—Main
Option
Date (mm:dd:yy)
Time (hh:mm:ss)
SATA Port 1
SATA Port 2
SATA Port 3
SATA Port 4
Onboard FDC Controller Disables/enables the floppy disk controller.
Drive A
Halt On
4 Computer Setup (F10) Utility
Support for specific Computer Setup options may vary depending on the hardware
Description
Allows you to set system date.
Allows you to set system time.
For each, allows you to:
● run HDD self-test for selected channel:
●
SMART Status Check
●
HDD Short Self-Test
● HDD Extended Self-Test
●
auto-detect HDD size and head
● set extended IDE drive on selected channel to:
●
None
● Auto
●
set access mode on selected channel to:
● Large
●
Auto
● view:
●
Firmware
● Capacity
●
Cylinder
● Head
●
Precomp
●
Landing Zone
●
Sector
Allows you to set Drive A to:
● None
●
1.44M, 3.5 in.
Allows you to set POST error behavior to:
●
All Errors
● No Errors
ENWW