ICON IP PRO-FORM PRO 9000 User Manual page 32

HOW TO USE THE STEREO SOUND SYSTEM
To play music or audio books through the console’'s
speakers, you must connect your MP3 player, CD
player, or other personal audio player to the console.
Plug one end of your audio cable into the audio jack
on the console. Plug the other end into a jack on your
MP3 player, CD player, or other personal audio player.
Make sure that your audio cable is fully plugged in.
Next, press the play button
on your MP3 player, CD
player, or other personal
audio player. Then, adjust
the volume level on your
personal audio player or
press the volume increase
and decrease buttons on
the console.
If you are using a personal CD player and the CD
skips, set the CD player on the floor or another flat
surface instead of on the console.
HOW TO USE THE INTERNET BROWSER
Note: To use the browser, you must have access to a
wireless network including an 802.11b/g/n router with
SSID broadcast enabled (hidden networks are not
supported).
To open the browser, touch the globe button near the
lower-left corner of the screen. Then, select a website.
To navigate the Internet browser, touch the Back,
Refresh, and Forward buttons on the screen. To exit
the Internet browser, touch the Return button on the
screen.
To use the keyboard, see HOW TO USE THE TOUCH
SCREEN on page 21.
To enter a different web address in the URL bar, first,
slide your finger down the screen to view the URL bar,
if necessary. Then, touch the URL bar, use the key-
board to enter the address, and touch the Go button.
Note: While you are using the browser, the speed,
incline, fan, and volume buttons will still function, but
the workout buttons will not function.
Decrease Note: If you have questions after following these
instructions, go to support.iFit.com for assistance.
Increase HOW TO USE THE IPAD HOLDER
IMPORTANT: The iPad Holder was designed for use
with most full-size iPads. Do not place an iPad mini
or any other electronic device or object in the iPad
Holder.
To insert an iPad into
the iPad Holder (92),
set the bottom edge
of the iPad in the tray.
Then, pull the clip
over the top edge of
the iPad. Make sure
that the iPad is firmly
secured in the iPad
Holder. Reverse these
actions to remove the iPad from the iPad Holder.
Rotate the iPad Holder (92) to the desired angle.
32
Clip
92
Tray