MY MACHINE IS VIBRATING WHEN DISPENSING
1. Your machine has a powerful 19
bar pump that can cause vibrations
when machine is positioned
incorrectly.
MY COFFEE IS NOT HOT ENOUGH
1. Internals have not been
pre-heated.
2. Cup or mug is not
pre-warmed.
LEVER DOES NOT CLOSE
1. The capsule may not be inserted
correctly.
FAQS
QUESTION
1. What is the factory setting of the
machine?
2. What happens if I repeatedly
press the Buttons while coffee is
being dispensed?
3. Is the Programmable Dosing
Memory deleted when the
machine is unplugged?
4. The Buttons flash for a long
time. When is the machine ready
to use?
1. Unplug the device and remove the Water Tank. Ensure the
machine is placed on a flat, even surface. Ensure the Water
Tank and Capsule Basket/Drip Tray are fully located.
1. Press the Espresso Button ensuring no capsule is
inside the machine; this will run hot water through internal
pipework.
2. Pre-warm your cup by dispensing hot water into it and
then discarding before dispensing coffee.
1. Ensure that the capsule is inserted correctly as per
page 11.
1.2 Ensure the Capsule Basket is not over filled; empty
Capsule Basket if full.
ANSWER
1. The factory setting of the machine is programmed to 35ml
for the Espresso Button and 70ml for the Lungo Button.
2. Dispensing is interrupted.
3. No, the programming is not affected by unplugging the
machine.
4. It takes a little time for the machine to achieve the optimum
water temperature (approx. 40 seconds). Once it does, the
Buttons will illuminate and will be ready to dispense coffee.
*Nespresso
trademark is owned by Société des Produits Nestlé S.A
®
17
Need help?
Do you have a question about the Pod Machine and is the answer not in the manual?
Questions and answers