Compaq d338 - Microtower Desktop PC Management Manual page 36

Desktop Management Guide
✎
Ä
32
4. Type and confirm a password. Press
Type carefully; for security reasons, the characters typed do not
appear on the screen.
5. Use the up or down arrow key to move to Embedded Security
Enter
Device. Press
6. If the selection in the dialog box is Embedded Security
Device—Disable, use the left or right arrow key to change it to
Embedded Security Device—Enable. Press
change.
CAUTION: If you select Reset to Factory Settings—Reset, all keys will
be cleared and encrypted data will not be recoverable unless the keys have
"Take Ownership and Emergency Recovery Token"
been backed up (see
Only select Reset when instructed to do so in the procedure to recover
"Recovering Encrypted Data" on page 35
encrypted data (see
7. Use the left or right arrow key to move to File. Use the up or
down arrow key to move to Save Changes and Exit. Press
Enter
, then press
Take Ownership and Emergency Recovery Token
The Take Ownership Password is required to enable or disable the
security platform and to authorize users. If the embedded security
device fails, the Emergency Recovery mechanism allows users to be
authorized and data to be accessed.
1. If you are using Windows XP Professional or Home Edition,
click Start > All Programs > HP ProtectTools Embedded
Security Tools > Embedded Security Initialization Wizard.
If you are using Windows 2000, click Start > Programs > HP
ProtectTools Embedded Security Tools > Embedded Security
Initialization Wizard.
2. Click Next.
3. Type and confirm a Take Ownership password, then click Next.
www.hp.com
F10
.
F10
to confirm.
to accept the password.
F10
to accept the
).
Desktop Management Guide
).