Compaq dc5000 - Microtower PC Using Instructions

Using the small form factor computer in a minitower configuration

Hide thumbs Also See for dc5000 - Microtower PC:

See also: Manual

Using the Small Form Factor

Computer in a Minitower

The Small Form Factor computer can be used in either a minitower or desktop

configuration. To use it in the minitower configuration, you must purchase a

tower stand from HP (part number 316593-001). Go to

this part.

✎

Configuration

Using the computer in a minitower

configuration without using the tower stand

will compromise the terms of your warranty.

CAUTION: Towering this unit without the use of

the tower stand can cause the unit to overheat

and may result in damage to the computer or

data loss.

CAUTION: Ensure at least 4 inches (10.2 cm)

of space on all sides of the computer remains

clear and free of obstructions.

www.hp.com

to order

Table of Contents

Need help?

Do you have a question about the dc5000 - Microtower PC and is the answer not in the manual?

Page 1 Using the Small Form Factor Computer in a Minitower Configuration The Small Form Factor computer can be used in either a minitower or desktop configuration. To use it in the minitower configuration, you must purchase a www.hp.com tower stand from HP (part number 316593-001). Go to to order this part.
Page 2 To install the tower stand: 1. Align the hole at the base of the computer with the post and thumbscrew in the stand 12. 2. Tighten the screw to secure the computer to the stand 3. This adds stability and helps to ensure proper airflow to the internal components. ©...