Soundcore Boom 2 Pro Quick Start Manual page 7

Important Safety Information
• Operating temperature should be between 0°C to 40°C/32°F to 104°F.
• The product contains a battery pack, so it should not be exposed to excessive heat such as sunshine, fire or the like.
CAUTION: RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE OF USED BATTERIES ACCORDING TO THE
INSTRUCTIONS.
Notice
This product complies with the radio interference requirements of the European Community.
Declaration of Conformity
Hereby, Anker Innovations Limited declares that this product is in compliance with Directives 2014/53/EU & 2011/65/EU and
amendment (EU) 2015/863 and Regulation (EU) 2023/826. The full text of the EU declaration of conformity is available at the
following internet address:
https://support.soundcore.com/s/articleRecommend?type=DownLoad&secondType=doc
Maximum output power: 8.50 dBm
Frequency band: 2.4G band (2.402GHz-2.480GHz)
This symbol means the product must not be discarded as household waste, and should be delivered to an appropriate
collection facility for recycling. Follow local rules and never dispose of the product and rechargeable batteries with normal
household waste. Correct disposal of old products and rechargeable batteries helps prevent negative consequences for the
environment and human health.
This symbol indicates "separate collection" for all batteries and accumulators. Danger of explosion if battery is incorrectly replaced. To reduce
risk of fire, explosion or leakage of flammable liquid/gas, don't disassemble, crush, puncture, short external contacts, expose to temperature
above 60°C (140°F), sunshine or like, expose to extremely low air pressure or dispose of in fire or water. Replace only with specified batteries.
High or low extreme temperatures that a battery can be subjected to during use, storage or transportation:
During use: maximum 40℃ (104°F)
•
Storage: -20 - 45℃ (-4 - 113°F)
•
Transportation: 5 - 35℃ (41 - 95°F)
•
FCC Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate
the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These
01
limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses
and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to
radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Radiation Exposure Statement
The highest SAR value reported under this standard during product certification for use next to the body/limb with the minimum separation
distance of 0 mm. This transmitter must not be collocated or operating in conjunction with any other antenna or transmitter.
Company Name: Fantasia Trading LLC
Address: 5350 Ontario Mills Pkwy, Suite 100, Ontario, CA 91764
Telephone: +1 (800) 988 7973
IC NOTICE TO CANADIAN USERS
This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada's
licence-exempt RSS(s). Operation is subject to the following two conditions:
(1) This device may not cause interference.
(2) This device must accept any interference, including interference that may cause undesired operation of the device.
L'émetteur/récepteur exempt de licence contenu dans le présent appareil est conforme aux CNR d'Innovation, Sciences et Développement
économique Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes:
(1) L' appareil ne doit pas produire de brouillage;
(2) L' appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d' en compromettre le fonctionnement.
IC Radio Frequency Exposure Statement:
This EUT is compliance with SAR for general population/uncontrolled exposure limits in IC RSS-102 and had been tested in accordance with the
measurement methods and procedures specified in IEEE 1528 and IEC 62209. This equipment should be installed and operated with minimum
distance 0 mm between the radiator and your body/limb. This device and its antenna(s) must not be co-located or operating in conjunction with
any other antenna or transmitter.
Déclaration d'exposition aux radiofréquences IC:
Cet EUT est conforme au SAR pour la population générale/limites d'exposition non contrôlées dans IC RSS-102 et a été testé conformément aux
méthodes et procédures de mesure spécifiées dans IEEE 1528 et CEI 62209. Cet équipement doit être installé et utilisé à une distance minimale de
0 mm entre le radiateur et votre corps/membre. Cet appareil et ses antennes ne doivent pas être situés ou fonctionner en conjonction avec une
autre antenne ou un autre émetteur.
CAN ICES (B) / NMB (B)
This Class B digital apparatus complies with Canadian ICES-003.
(Cet appareil numérique de la Classe B conforme à la norme NMB-003 du Canada).
02