Midea MRU21C7BST User Manual page 9

Steps:
1. Unplug the refrigerator and remove all food items from the door shelves. Secure the door with
tape.
2. Remove the left hole cover and the right upper hinge cover using Phillips and flat-head
screwdrivers, and remove the upper hinge. Disconnect the signal wire (
refrigerator body from the hinge cover. Keep the screws for later use.
3. Remove the upper door body.
4. Remove the middle hinge with a Phillips screwdriver, and then remove the lower door body from
the body of the refrigerator. Retain the bolts for future use.
5. Remove the right lower hinge screws, and then remove the lower hinge.
6. Remove the lower hinge shaft and move it to the left of the lower hinge and tighten it, then install
the removed right lower hinge to the left lower end of the refrigerator and secure it with the
screws that were kept aside.
7. Remove the shaft sleeves at the right end of the lower door body and the upper door body and
the shaft hole cover at the left end of the lower door, and install them on the opposite side.
1
09
) at the top right of the
EN