Midea MRU21C7BST User Manual page 6

PRODUCT INSTALLATION
Installation Instructions
Finding a suitable location
This refrigerator is designed to be free standing only, and should not be recessed or built-in.
•
The refrigerator should be placed in a well-ventilated indoor place; the ground shall be flat and
•
sturdy.
Keep away from heat and avoid direct sunlight. Do not place the refrigerator in moist or watery
•
places to prevent rust or reduction of insulating effect.
Dimensions and clearances
Too small of a distance from adjacent items may result in the degradation of freezing capability
•
and increased electricity costs. Allow over 100 mm of clearance at both sides and the top, and
50-75 mm at the back when installing the appliance.
EN
Providing a proper power supply
Check your local power source. This refrigerator requires an AC 115 V, 60 Hz power supply.
•
Use a receptacle that accepts the grounding prong. The power cord is equipped with a 3-prong
•
(grounding) plug which mates with a standard 3-prong (grounding) wall outlet to minimize the
possibility of electric shock hazard from this refrigerator.
CAUTION
The refrigerator should always be plugged into its own individual electrical outlet which has a
voltage rating that matches the rating plate.
Never unplug your refrigerator by pulling on the power cord. Always grip the plug firmly and pull
straight out from the outlet.
WARNING: When positioning the appliance, ensure the supply cord is not trapped or damaged.
TOP
>100mm
BACK
50~75mm
SIDE
>100mm
06