Advertisement
Quick Links
Instruction Manual
Model:
CSX2-M2-EU
CORDLESS CHAIN SAW
• SAFETY
• ASSEMBLY
• OPERATION
CAUTION: Before using this tool, please read this manual completely,
• MAINTENANCE
and follow all operating safety measures.
Senix Australia Pty Ltd. 32/3 Westside Avenue, #Port Melbourne, Victoria, 3207
For customer support, please call 1300 461 825 or email us at info@senixtool.com
SENIX.COM.AU
English
Advertisement
Related Manuals for Senix CSX2-M2-EU
Summary of Contents for Senix CSX2-M2-EU
- Page 1 CAUTION: Before using this tool, please read this manual completely, • MAINTENANCE and follow all operating safety measures. Senix Australia Pty Ltd. 32/3 Westside Avenue, #Port Melbourne, Victoria, 3207 For customer support, please call 1300 461 825 or email us at info@senixtool.com SENIX.COM.AU...
- Page 2 Wear ear protection. collected separately and disposed of in an environmentally correct manner. Wear a dust mask. Wear safety footwear. Wear protective gloves. Use appropriate protection for foot-leg and hand-arm. EN - 2 SENIX.COM.AU...
- Page 3 Damaged or entangled cords increase the correct power tool will do the job better and risk of electric shock. safer at the rate for which it was designed. e. If operating a battery charger in a damp 3 - EN SENIX.COM.AU...
- Page 4 Keep cutting tools sharp and clean. Prop- WARNING erly maintained cutting tools with sharp cutting edges are less likely to bind and are Use only SENIX X2 batteries (B20X2/B25X2/ easier to control. B40X2/B50X2/B60X2/B80X2) and chargers g. Use the power tool, accessories and (CHX2/CHQX2/CHQX2-M-EU/CHDX2-M-EU).
- Page 5 • Only use replacement bars and chains l. Do not attempt to fell a tree until you specified by the manufacturer. Incorrect have an understanding of the risks and replacement bars and chains may cause how to avoid them. Serious injury could 5 - EN SENIX.COM.AU...
- Page 6 These conditions may significantly reduce the Take the following points into account to exposure level over the total working period. minimise the vibration and noise exposure risks. EN - 6 SENIX.COM.AU...
- Page 7 This field may under some circumstances interfere with active or passive medical implants! To reduce the risk of serious or fatal injury, we recommend persons with medical implants to consult their doctor and the medical implant manufacturer 7 - EN SENIX.COM.AU...
- Page 8 KNOW YOUR UNIT APPLICATIONS Model: CSX2-M2-EU As a chain saw: Basic limbing, felling, woodcutting, and removing buttress roots. Guide bar Side cover knob Saw chain 10 Chain tensioning adjustment ring Chain kickback brake handle Trigger Front handle Kickback brake indicator...
- Page 9 SPECIFICATIONS* Model CSX2-M2-EU Rated Voltage 36 V (40 V Max*) No Load Speed 11 000 rpm Chain & Guide Length 406 mm Chain Speed 20 m/s Oil Capacity 350 ml Vibration level front handle 0.97 m/s Vibration level rear handle 1.84 m/s...
- Page 10 "click" showing the battery packs are locked this product. The use of attachments or in place. accessories not recommended can result in serious personal injury. BAR AND CHAIN OIL FILLING WARNING! Do not smoke or bring any fire or flame near EN - 10 SENIX.COM.AU...
- Page 11 Follow the instructions in your operator’s manual for starting the chain saw. Control the The indicator works as a warning light. If chain saw with a firm grip on both handles the lock-off button and trigger are pressed 11 - EN SENIX.COM.AU...
- Page 12 Trees This product is equipped with an automatic should not be felled in a manner that would oiling system! The oiling system automatically endanger any person, strike any utility line EN - 12 SENIX.COM.AU...
- Page 13 When the tree begins to fall remove the Fig. 12 13 - EN SENIX.COM.AU...
- Page 14 Only perform cleaning and maintenance work with new ones. according to these instructions! All further Lay the new saw chain in a loop on a flat works must be performed by a qualified surface and straighten any kinks. EN - 14 SENIX.COM.AU...
- Page 15 • If desired, drain the bar and chain oil to reduce seepage. • Carry saw by its handle with bar and chain facing behind the operator. Fig. 18 • Ensure the product is secure and cannot 15 - EN SENIX.COM.AU...
- Page 16 Electrical products should not be discarded with household products. Used electrical products must be collected separately and disposed of at collection points provided for this purpose. Talk with your local authorities or dealer for advice on recycling. EN - 16 SENIX.COM.AU...
- Page 17 Refer to the manual to properly Chain installed backwards install the saw chain and guide Battery pack are discharged Charge the battery packs Product stops running suddenly Release the trigger and restart Overcurrent protection the machine 17 - EN SENIX.COM.AU...
Need help?
Do you have a question about the CSX2-M2-EU and is the answer not in the manual?
Questions and answers