Introduction to RP2350-PICO2-XXL RP2350-PICO2-XXL is re-design of the popular Raspberry PI PICO2 board with these improvements: • all 48 RP2350 GPIOs are available to the user • USB-C power supply connector which allow more current to be used by the board •...
Order codes for RP2350-PICO2-XXL and accessories: RP2350-PICO2-XL industrial grade RP2350-PICO2 board with 48 GPIOs exposed RP2350-PICO2-XXL includes everything in XL plus 8MB PSRAM and microSD card USB-CABLE-AM-USB3-C high quality USB-C cable for power and programming pUEXT pack of cables pack of 3 pcs 200 mm pUEXT cables...
POWER SUPPLY: VBUS +5V from, USB-C output VDD_SYS +5V may be output or input if you want to use as input i.e. to feed power from external 5V to this line make sure board is not connected to USB! when you use as output i.e. you feed external electronics from it up to 1A @ 5V +3.3V output which can source up to 2A @ 3.3V 3V3_EN...
- mUEXT is 1.27 mm step boxed header connector which is with same layout as UEXT - pUEXT is 1.0 mm single row connector (this is the connector used in RP2040-PICO30) Olimex has developed number of MODULES with this connector. There are temperature, humidity, pressure, magnetic field, light sensors.
SOFTWARE: RP2350-PICO2-XXL uses same software as PICO2 • Raspberry PI C-SDK • MicroPython SDK (note that to the current date RP2350B chip support is not implemented in MicroPython and the access of the GPIO30-47 in MicroPython is not implemented. •...
Need help?
Do you have a question about the RP2350-PICO2-XXL and is the answer not in the manual?
Questions and answers